etac 28470 Cross 5 Wheelchair Instruction Manual
- June 16, 2024
- Etac
Table of Contents
etac 28470 Cross 5 Wheelchair
Product Information
Specifications
- Model: 28470
- Tipskydd mod 2 std sh 37-55 Anti-tip mod 2 std sh 37-55 Kippschutz mod 2 Std Sh 37-55
- Part Number: 1a15685.2
- Date: 2022-08-10
- Product: Etac Cross 5 Active Etac Cross
Product Usage Instructions
Assembly Instructions
- Identify the parts included in the package: x2 of part x1 and x1 of part x2.
- Follow the steps below to assemble the product:
- Start by attaching the x1 part to the base using the provided screws. Tighten the screws with a maximum torque of 5Nm.
- Next, attach the x2 parts to the sides of the base using the provided screws. Make sure to align them properly.
- Adjust the height of the assembled product to a range of 3-7 cm as per your preference.
- Repeat the same assembly process for all four sides of the product.
Product Usage
To use the Etac Cross 5, please follow these instructions:
- Place the product on a stable surface, ensuring all four sides are properly assembled and secured.
- Adjust the height of the product to your desired level within the range of 3-7 cm.
- Make sure to distribute the weight evenly on the product surface.
- Ensure the Tipskydd mod 2 std sh 37-55 Anti-tip mod 2 std sh 37-55 Kippschutz mod 2 Std Sh 37-55 is properly installed to prevent tipping.
- Follow any additional usage instructions provided in the user manual for specific applications or scenarios.
Maintenance and Care
To keep your Etac Cross 5 in good condition, follow these maintenance and care tips:
- Regularly inspect the product for any signs of damage or wear.
- Clean the product using a mild soap and water solution, and dry it thoroughly.
- Avoid using abrasive cleaners or solvents that may damage the product’s surface.
- Store the product in a dry and safe place when not in use.
Frequently Asked Questions (FAQ)
-
Q: Can I adjust the height of the Etac Cross 5?
A: Yes, the height of the Etac Cross 5 can be adjusted within a range of 3-7 cm. -
Q: How do I prevent tipping of the product?
A: To prevent tipping, make sure to properly install the Tipskydd mod 2 std sh 37-55 Anti-tip mod 2 std sh 37-55 Kippschutz mod 2 Std Sh 37-55 included with the product.
PACKAGE CONTENT
INSTALLATION INSTRUCTION
Etac Supply Center AB
Långgatan 12
SE-334 33 Anderstorp
www.etac.com
Anti-tip mod 2 std sh 37-55
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>