i9 MAX 4K Professional GPS Drone with Camera User Guide

i9 MAX 4K Professional GPS Drone with Camera User Guide

Flight environment requirements

• Do not fly the aircraft in bad weather such as high winds, snow, rain, foggy weather, etc.
• Do not fly in the no-fly zone restricted by relevant laws or regulations.
• Choose a wide, open place with no tall buildings surrounded as a flight site. Buildingsthatuse a lot of steel bars may affect the compass work and block GPS signals resultinginpoorpositioning or even inability to locate the aircraft.
• This product uses 5.8GHz high-definition image transmission, and should beflowninanopenenvironment without occlusion and electromagnetic interference.
• Do not fly in areas that have high-voltage lines, communication base stations or transmission towers, etc. to avoid signal interference of the remote controller.
•  After the aircraft starts, please stay away from high-speed rotating parts (suchaspropellers,motors, etc.
• When flying, please keep aircraft in sight, away from obstacles, crowds, water, etc.
• When flying, if the aircraft is working in the GPS mode, and the video transmissionscreenfreezes or is lost, please use the automatic return function immediately to let the aircraft return on its own. If do not know the position of the aircraft and the surrounding conditions, userwillhave a high probability of crashing the aircraft if operate the remote control rashly. ●Please pay attention to the orientation of the aircraft at all times. The directioncontrolledbythe remote control is always executed with the direction of the nose as the front.
• If not proficient in manually controlling the aircraft, it is strongly recommendedtousetheonebutton takeoff and landing function, and the aircraft will automatically takeoff or land.andoperate the joystick of the remote control carefully, any slight movement of thejoystickwillcause the aircraft to move significantly, and it is not recommended to operatethejoystickinalarge way.
• And operate the joystick of the remote control carefully, any slight movement of thejoystickwill cause the aircraft to move significantly, and it is not recommended to operatethejoystickin a large way.
• When the GPS is interfered, the positioning effect of the aircraft will be deterioratedorevenimpossible to locate, so that the aircraft is out of control.
• When flying above 4000m altitude, the performance of the aircraft battery andpowersystemwill be degraded due to environmental factors, thus the flight performance will beaffected.Please fly with caution. ●GPS is not available foreflight in Arctic circle and Antarctic circle.
• This product is suitable for people who have experience in operating modeldom related products and are not younger than 14 years old

Disclaimer and Warning

• The use of aircraft has certain safety risks, which is only applicable to peopleaged14andabove who have experience in operating models or related products, Do not let childrentouchthe aircraft Please be careful when operating in the scene where children appear.Beforeusingthis product, please read this document carefully and operate in strict accordancewiththeinstructions. This statementplicable to the safe use of this product and legal rightsandinterests has an important impact
• This product is a multi-rotor aircraft, which will provide a comfortable flight experiencewhenthe power supply works normally and all parts are not damaged, The Company reservestheright to update this disclaimer
• Be sure to read this document carefully before using the product to understandthelegalrights, responsibilities and safety instructions; Otherwise, it may cause property loss, safety accidents and personal safety hazards. Once use this product, users are deemedtohaveunderstood, recognized and accepted all terms and contents of this statement. Userspromiseto be responsible for their actions and all consequences arising therefrom. The user promises to use this product only for legitimate purposes, and agrees to these terms andanyrelevantpolicies or guidelines that the company may formulate. To the maximum extent permitted by law, in no event shall the company be liable for any indirect, consequential, punitive, incidental, special or penal damages, including any shall be held liable for any loss sufferedbythe product (even if the company has been advised of the possibility of such loss).
• The laws of some countries may prohibit the disclaimer of warranty terms, sotherightsmay vary from country to country. In the case of compliance with laws and regulations, thecompany reserves the right of final interpretation of the above terms. The companyreservesthe right to modify this article without prior notice terms are updated, revised or terminated,

Know the aircraft

Aircraft adopts the mainstream light weight and foldable design. Under the premisringflightperformance and user experience, it is unprecedentedly convenient to use and carry.

Aircraft is equipped with GPS/GLONASS/Badious three-mode satellite positioningandnavigationsystem, which makes flying more accurate and safer. The aircraft is equipped withanoptical flowpositioningystem, which can achieve stable fight and hovering at ultra-low altitude or indoors.

Aircraft is equipped with three-axis mechanical anti-shake and stabilized gimbals, whichcanshoot4Khigh-definition videos and 8-megapixel photos stably. During the flight, adjust the shootingangleofthe camera to obtain a unique perspective and composition, and take unique photosandvideos,itwill get a better aerial photography experience

Aircraft adopts self-developed leading flight control system to provide intelligent, stableandsafefight. It can realize intelligent flight functions such as automatic return, orbital flight, intelligent follow-up, waypoint fight, etc.

Enjoy-Fly2 supports mobile phones with Android and IOS operating systems. After downloadingand installing Enjoy-Fly2, users can realize various operations and settings of flight andcamerabycontrolling The remote control and APP. Information such as real-time shooting picturesandflight parameters can be displayed on the mobile device during flight. users can easily obtain small videoswith unique effects

Aircraft has a maximum flight speed of 50km/h, a maximum flight time of 26minutes, antimaximum flight distance of 3000m.

Aircraft diagram

1. CW motor
2. CW propelle
3. CCW propeller
4. CCW motar
5. Foot stool
6. Gimbal& camera
7. Fight status indicator light
8. Aircraft power indicator
9. 4G module expansion interface
10. Micro SD card slot

1. Before using the aircraft, please read the “operation Guide” carefully, and watch relatedvideoson the “college” page in the Enjoy-Fly2 App to avoid property damage or even personal injurydue to improper operation.
2. High-speed rotating motors and propellers are dangerous. The operator shouldkeepasafedistance from the aircraft and keep the aircraft away from crowds, buildings, treesorotherobstacles to avoid collisions

LEDs and status indicator of aircraft

The indicator light on the rear battery of the aircraft is used to indicate the current statusofhefightcontrol system during flight

Please refer to the table below for the status of fight control system indicated by different color flights

. Flight status indicator-LED

1. Indicator light Flashing blue light
2. Solid blue light
3. Solid green light
4. Flashing green light Red and blue light
5. flashing alternately
6. Red and green light flashing alternately
7. Solid red light
8. Flashing red light
9. Red light flashes doubly
10. Green light flashes doubly
11. Blue and green light flashes alternately

Status

RC and aircraft is not paired, PS is not located
RC and aircraft is not paired, GPS is located
RC and aircraft is paired, PS is located
RC and aircraft is paired, PS is not located
Horizontal calibration process
Vertical calibration process
Serious error
Low battery alarm
Alarm for severe low battery.
Optical flow system is located
Compass data error

Know the remote control

The remote control must be used with the aircraft. The remote control has a built-in digital image transmission system, and after connectingtoamobile device, the high-definition picture and fight data can be displayed on the mobilephoneinreal time through the App. Through the joystick and various function buttons on theremotecontrol,the aircraft and camera can be controlled within a communication distance of up to3000m(FCCcompliant version, unobstructed and uninterrupted environment).

The telescopic foldable phone holder located at the bottom of the remote control is usedtoplacethe phone. The rocker is detachable for easy packing and carrying.

The remote control has a built in rechargeable lithium battery with a capacity of 2600mAh, andthelongest working time is not less than 2.5 hours

Remote control diagram

1. Gimbal adjustment : Control the angle of the camera.
2. Photo button :Press to take a picture.
3. USB port : For charging.
4. Video button :Press to start/stop recording the video.
5. Zoom button :Press and hold this buttonandpullout ① at the same time to adjust thezoomofthe camera, and the picture wil be enlargedorreduced accordingly.
6. Antenna : Transmit aircraft control andimagewireless signals.
7. Connection status indicator : When the green light is always on, the aircraft is connected, and when the red light is always on, the aircraft is not connected.
8. Power indicator
9. Power switch ;Short press: check the battery power; Long press: turn on/off the remote controller.
10. Data wire por t: Connect the RC and phone.
11. Left joystick
12. One key takeoff / landin g rests this button before takeoff, and the aircraft will takeoutomatically; Press this button after takeoff, and the aircraft will land automatically.
13. sport mode switch : When it’s off, aircraft is normal speed mode When it’s on, aircraft is high speed mode, please fly carefully.
14. RTH / Pause button : Long press over 1.5 seconds, aircraft will start RTH mode. Short press this button, aircraft will stop intelligent mode(except low battery return), and hover.
15. Right joystick

Status indicator of remote control

There are two groups of LEDs on the remote control panel, one LED on the left sideisusedtolindicate the current aircraft connection status, and four LEDs on the right side are usedtoindicatethe current remote control power. The LEDs are illuminated in the following way and their meanings are described below

Connection status indicator–LED

Power indicator–LED

than 9 minutes after power-on; the prompt disappears automatically once operate.

Joystick Mode

The more commonly used remote control joystick control modes are right-hand throttle mode(Mode1,i.e. Japanese hand) and left-hand throttle mode (Mode 2, ie. American hand). Thefactorysettingof the remote control is left-handed throttle mode (Mode 2, i.e. American hand). This manual alcoates the left-hand throttle mode (Mode 2, ie. American hand) as an example to explainthecontrolmethod of the remote control
The operation methods are as follows.

.Mode 1

.Mode 2

How to control the aircraft

After the aircraft takes off, refer to the following diagram to control the aircraft.

Mode1

Mode2

Battery life check

Tap the on/off button to know the current battery level by the lighting status of the indicator
.

Charge

Charging the aircraft battery

Before each use of the aircraft battery, please ensure that the battery is fully charged Iebatteryislow,please remove the battery and charging cable and charge it according to the following diagram

Charging the remote control

If the remote control is low on power, please charge it as shown below

Attention:

• The official special charger provided must be used for charging.
• The battery temperature of the aircraft is high after the flight, so must wait about half anhourfor the battery to cool down before charging.
• Charging must be done under adult supervision. It must not be used by children. Pleasekeepaway from flammable materials when charging.
• Do not leave the monitoring range of this product. The power of the USBpower adapter determines the length of charging time.

Download Enjoy-Fly2 APP

Download Enjoy-Fly2 APP
Enjoy-Fly2 supports Android 6.0 and above, and iOS 10.0 and above. Scan the QR code below to enter the link to download the APP. For better experience, please make sure to connect your phone and run Enjoy-Fly2 before flying.

Attention:

• Please make sure the phone is fully charged before using Enjoy-Fly2.
• When use Enjoy-Fly2 on your phone, please focus on the control of the flying machine.
• Do not answer calls, send or receive text messages or use other phone functions while flying.
• The maps used in the map screen must be downloaded from the Internet. Beforeusingthisfunction, it is recommended to connect your mobile device to the Internet to cachethemaps.
• Users who use the aircraft in mainland China need to complete real name registrationaccordingto the relevant regulations of the Civil Aviation Administration of China, please register through the CAAC.
• Please register through the CAAC real-name registration system for drones. For more information, please visit https://uas.caac.gov.cn.
• Enjoy-Fly2 will continue to optimize, iterate, upgrade and add new features fromtimetotime,sothe contents of this section may differ from the APP.
• Please refer to the actual interface of APP for details.Enjoy-Fly2 interface description.

Enjoy-Fly2 interface description

Through Enjoy Fly2 APP, user can watch the images taken by the camera in real time, andusercanalso check the current status and data of the flying machine, user can also Control the flight, swells control the camera of the aircraft, control the photo, video and set the fight parameters. Turn on the power of the remote control and connect the phone and the remote-control withthedata cable. Open Enjoy-Fly2 to enter the APP homepage, when the upper left corner of theinterfaceWhen the top left corner of the interface shows “Connected Device”, click “Start Flight” toenterthecontrol interface. Prepare the remote control

1. Homepage : back.

2. light mode and status prompt : Display the current flight status.

3. Return Progress : Display the current low power return progress of the vehicle.

4. Remote Control Signal : Display the signal of remote control.

5. GPS signal of phone: Display the GPS accuracy of phone.

6. GPS status : Display the GPS.

7. Battery life: Display the current battery life.

8. General Settings : Click the icon to expand the settings menu, the sub-menu includes aircraft settings, Obstacle avoidance function settin g , remote control setting, aircraft battery setting and others set up

9. Aircraft fight status data:
   HS:the current horizontal fight speed of the aircraft. VS: the current vertical fight speed of the aircraft. H: the altitude of the aircraft’s current position and take- off point. D: the distance between the current position of the
   aircraft and the take-off point.
   

10. One key take-off/ landing : Before the aircraft takes off, the take-off icon is displayed. After clicking, the aircraft will automatically takeoff and hover at a height of 1.2 meters. After the aircraft takes off, the landing icon i is displayed, and the aircraft automatically descends to the ground after clicking. Will automatically takeoff and hover at a height of 1.2 meters

11. Start or exit the RTH : In the process of returning,clickthis icon, and the aircrafwillngandenterthe hovering position.

12. integrated position display : Displaythemap,theorientation of the aircalatiheperson,thedirection of the nose, the direction andpositionofthemobile phone.
    Camera Pitch Angle : Displays the current cameraangle.camera horizontally forward is 0 degrees, theangleisnegative when the camera is down, andtheangleispositive when the camera is up
    SD card capacity : Display the used capacity of SDcardinthe aircraft and total capacity
    Camera zoom status : Display the current camerazoommagnification
    Photo/video switch : Click this icon toswitchbetween-photo and video modes
    Photo/video button : click this icon totakeaphotoinphoto mode; click this icon tinginvideomode, click again to stop and save thevideo
    Camera Settings : Set different parameter of camera.
    One key shoot : Contain ‘dronie,rocket,circle,helix,boomerang’mode
    Album : Open the photo and video storage of theaircraftplace. Tap pictures or videos to quickly share, downloader manage files

Prepare the remote control

Install the rocker and unfold the antenna

The remote control in the storage state is not installed with the rocker, user needtotakeouttherocker from the accessory package in the package and install it to the remote control beforeusing.After that, unfold the Open the remote control and open the cable.

1. Installing the stick

2. Unfolded Antenna
   

Install the phone and connect the data cable

There are 3 kinds of data cables included in the package, please select the appropriatecabletoconnect the remote control to the phone according to the phone interface mode

1. Unfolded Antenna

2. Connect the data cable
   

Attention

• During the flight, the direction of the remote control antenna is very important, whichdirectlyaffects the flight distance and the quality of the image transmission.

• When the antenna and the back of the remote controller have an included angle of 180°or 270°and the antenna plane is facing the aircraft, the signal quality of the remote control andtheaircraft can reach the best state.
  

• The antenna position should be adjusted to ensure that the aircraft is alwaythebestcommunication range.

• When controlling the aircraft, user should adjust the orientation and distancebetweentheremote control and the aircraft, and adjust the antenna position to ensure that the aircraft is always.

• Communication equipment in the same frequency band will cause interference totheaircraft,please stay away from interference sources when flying

Preparing the aircraft

The aircraft is shipped in a stowed condition, please follow the steps below to prepare the aircraft.

1. Extend the front and rear arms outward

2. .Separate the propeller

3. .Remo the gimbal

4. Insert the SD card.

5. Insert the battery

6. .Complete
   

Notelet ensure that the aircraft is shut down when installing or removing the obstacle avoidance module. Disassembly and assembly of the obstacle avoidance module when the aircraft isstartedmay damage the obstacle avoidance module, resulting in abnormal function.

Ready to fly

Start and connect

1. Long press the power switch for 2 seconds to turn on the power of the remote control.
2. Long press the power switch for 2 seconds to switch on the aircraft battery switchtoturnontheircraft.
3. Put the aircraft still in a horizontal position, wait until the connection status indicator oftheremote controller changes from red to green, and the aircraft status indicator changes from-blue to green, indicating that the connection is successful

Note; Before turning on the power of the aircraft, make sure that the gimbal protectivecoverisremoved and the front and rear arms are unfolded, so as not to affect the self-test of the aircraft

. Activate the aircraft and bind the device

Brand new aircraft must be activated through the Enjoy-Fly2 App. Please turn on the aircraft dtheremote controller, run Enjoy-Fly2 and operate according to the interface prombiledevicerequires Internet access during the activation process.

Upgrade

After activating the aircraft and the remote control, if Enjoy-Fly2 prompts that there wfirmwareupgrade, it is recommended that users follow the Enjoy- Fly2 prompts to upgrade toobtainabetterexperience

GPS satellite positioning signal description

The GPS status icon of the aircraft in the upper right corner of the status bar at thetopof theAPP,as shown in the figure below, displays the current number of satellites connected totheGPSoftheaircraft and the signal strength.

When the aircraft status indicator is steady green, it means that the GPS has successfullypositionedand the aircraft can take off safely.

When the aircraft status indicator light is blinking green, it means that the GPS signal isweakorthereis no signal. At this time, the GPS fails to locate, and it is not recommended to fly. WhentheGPSisnopositioned, the flight altitude will be limited to 6 meters. At this time, there is noreturnfunction,please do not fly out of sight.

Prepare fight inspection

1. Make sure the remote controller, aircraft battery, and mobile device are fully charged.
2. Make sure the propellers intact and installed correctly.
3. Make sure that front and rear arms and the blades are fully unfolded.
4. Make sure gimbal cover is removed
5. Make sure that the camera lens is clean.
6. Make sure the micro SD card installed correctly.
7. Ensure that the battery is firmly installed.
8. Always use original components or accessories certified by the manufacturer. Theseus non-original accessories may pose a hazard to the use of the aircraft.
9. lf there is an obstacle avoidance module, please confirm that the module is installedsecurely,and the lens is clean and free of dir.

Operate the aircraft takeoff

Unlock to fly

1. Manually control the aircraft or use the one-key takeoff andlandingfunctiontostart flying.
   Toggle the left and right joysticks outward as to get the propellers started to rotalypushthethrottle, the aircraft will takeoff
   

2. . One-key takeoff
   Long press the ③ button for 2 to 3 seconds. When the remote controller beeps steadilheaircraftwill automatically takeoff and ascend to altitude of 1.2 meters and hover.

Or Click the’t’on app, then click confirm, the aircraft will automatically takeoff anascendtoaltitudeof 1.2 meters and hover.

Note: Please make sure the safe distance for operate

Operate the aircraft flying

Reference page33 ‘throttle control stick mode’

Flight gear

Control the aircraft with the normal gear or the sport gear, need to switch the gear throughtheswitch on the remote control.

Sport off

Use GPS positioning, optical flow positioning system to achieve precise hovering, stableflight.intelligent flight functions, etc.

When the GPS signal is good, GPS can be used for precise positioning; when the GPSsignal isnotgood, and the environmental conditions such as lighting meet the requirements of the optical flow system, the optical flow system can be used for positioning. In normal mode, themaximumfyingspeed is 10m/s.

Sport on

Using GPS module, optical flow positioning system, the aircraft can achieve precisehoveringandstable flight. When the Sport mode is turned on, the control sensitivity of the aircraft will beadjusted,and the maximum fight speed will be increased to 14 m/s.

Note: When the GPS satellite signal is poor or the compass is disturbed and doesn’t meettheworking conditions of visual positioning, the aircraft will enter the altitude mode. Inthealtitudemode, the aircraft will drift in the horizontal direction; And some intelligent flight functionswillnot be available. Therefore, in this mode, the aircraft itself cannot achieve hover andautonomousbraking, so it should land to a safe position as soon as possible to avoid accidents. User shouldtryour best to avoid flying in GPS satellite with poor signal and narrow space, so as toavoidenteringaltitude mode and causing flight accidents.

RTH and pause

Aircraft has return-to-home (RTH) function, and there are 3 types of RTH: one- key RTH, lowbatteryRTH and lose control RTH.

Before the aircraft takes off, when the aircraft status indicator turns green and theGPSmodeisdisplayed on the app, the current position of the aircraft will be recorded as the return point

.One-key RTH

When the GPS signal is good (the aircraft status indicator is solid green), the aircrafcanreturntothereturn point via the button on the remote control and the return process is thesameaslosecontrol RTH. The diference is that when the aircraft returns and begins to land, theuser cancontrolthe aircraft through the joystick to avoid obstacles and change the landing position. After pressingand Short press’ button for more than 2 seconds to exit the return, the user canregaincontrolofthe aircraft.

During RTH, user can control altitude of aircraft, adjustment range is between altitudeTHtolimitaltitude of aircraft.

Low battery RTH

During the fight, when the battery power of the aircraft is low enough to return home, aselectionpop-up window will appear in the APP at the same time. At this point: If the user selects”Confirm”,the aircraft will immediately execute the return procedure. During the return process, theusercanclick the return icon on the APP interface Terminate the return flight. After that, the aircraft willnolonger perform low-power return, and the user needs to control the return of the aircraft byhimself;If the user selects “Cancel”, the aircraft will continue to fly in the current state, andtheusercancontrol the aircraft normally. After that, the aircraft will no longer performlow-power return, andtheuser needs to control the return of the aircraft by himself;

If the user does not choose, the aircraft will immediately execute the return procedureafterthe10-second countdown in the APP ends

During the return process, the user can adjust the altitude of the aircraft through thejoystidtheadjustment range is between the current return altitude and the set “return altitude setting”. When the aircraft lands, the user can control the aircraft to avoid obstacles and chaelandingposition.When the battery power of the aircraft reaches a serious low level, the status indicator of theaircraftwill turn red and double flash, and the aircraft will perform a forced landing procedure

When the aircraft lands, the user can control the aircraft to avoid obstacles and changethelandingposition

Lose control RTH

When the GPS signal is good (the aircraft status indicator is solid green), the compassisworkingnormally, and the aircraft successfully records the return point, if the remote control signal continues to be lost for more than 2 seconds, the fight control system will take over the control of theaircraftand control the aircraft to fly back to the last recorded return point. If the signal of theremotecontroller is restored later during the fight, the return process will continue, but the user cancancelthe return and regain the control of the aircraft through the Pause button

During lose control RTH, user can control altitude of aircraft, adjustment range is betweenaltitudeofRTH to limit altitude of aircraft

• In order to ensure an accurate return position, please use this mode to take off after theGPShas been positioned (the status indicator light is always green) in an open and flat area(nonlarge buildings within a radius of 50m, and the ground is flat within a radius of 10m). Thereturnfunction will take effect
• Failure to meet take-off and set-up conditions is at the user’s own risk.
• Before using the Smart Return to Home function, make sure the aircraft has beenpositionedbyGPS before takeoff
• During RTH process, when the aircraft is flying above 30 meters, the aircraft will immediately perform the RTH function; when flying below 30 meters, the aircraft will rio30metersautomatically and then perform the RTHifunction
• When the GPS signal is poor or the GPS does not work, it is not possible to return.
• If the aircraft fails to locate by GPs, and the remote control signal continues beinterruptedformore than 2 seconds, the aircraft will not be able to return. At this time, the aircraft will slowly descend unit it lands and stops propellers
  The return altitude is set to 30m by default, and the flight limit altitude is set t120mbydefault.Users can set appropriate parameters on the “Aircraft Settings” page of the APPaccordingtotheir needs

Operate the aircraft landing

Choose any of the following methods to control the aircraft to land

Manually operate the remote control to land:

Slowly pull down the throttle stick, and the aircraft will land slowly. When the aircraft lands, continue to keep the throttle stick at the lowest position unti the propeller stops rotating

Slowly pull down the throttle stick

One key land

Press and hold ③ the one-key takeoff and landing button on the remote control for 2-3seconds,theremote control will make a “beep-beep-beep-” sound, and the aircraft will land verticallyfromthecurrent position until the propeller stops rotating

Or click the icon E on the APP interface, and the APP will pop up a confirmation dialog box. After clicking “OK, the aircraft will land vertically from the current position until the propeller stops rotating.

Automatic landing after automatic return or low power return and other intelligent return

Note: During landing, please keep a safe

Power of

After completing the flight, please turn off the power of the aircraft and the remote-control nilsequence.

Gimbal

The three-axis stabilized gimbal provides a stable platform for the camera, so that thecameracantake stable pictures even when the aircraft is flying at high speed

The user can control the tilt angle of the camera through the pull wheel on the remotecontrol,andthe angle rotation range is from-90° to 20°

.Photo/video

Users can use the remote control buttons to take pictures and record videos, or clicktheiconontheAPP to take pictures and record videos.

Operate on app

1. elect the working mode: touch the camera working mode change icon’@’ to switch the working mode
2. Take a photo: Click the photo icon’O’to take a phot- photo.
3. Recording: Click the recording icon’●’ to start recording, and then click the recording icon’ ‘again
   to stop recording and save the recording to the aircraft SD card

The camera on the APP interface of the mobile device must receive the screen transmittedbytheaircraft camera, in order to realize the control on the APP interface

Operate on remote control

Take a photo: Short press @ the button on the upper left corner of the remote controltheremotecontroller makes a “beep” sound, and the camera takes a photo and saves it to the aircraft SDcard.Video recording: Short press @ the button on the upper right corner of the remotecontrol,theremote control will make a “beep-beep” sound, and the camera will start recording. Pressthebuttonagain, the remote controller will make a “beep-beep” sound, the camera will stop andsavethevideo.

Note: Please stop recording before shutting down, otherwise the file may be damaged. When the aircraft has no SD card or the memory card has an error, the shootingfileswillbestored in the phone’s SD card, and the video file quality is normal at this time. Cannot take pictures during video recording.

Intelligent flight mode

The aircraft can automatically shoot a variety of classic aerial photography accordingtothesetauxiliary shooting flight mode. Auxiliary shooting flight modes include dronie mode, circlemode,rocket mode, helix mode, etc.

Warning:

• Please use the intelligent flight function in an open and unobstructed environmeithoutobstacles, and always pay attention to whether there are people, animingsandotherobstacles in the path of the aircraft
• Always pay attention to objects from around the aircraft and use manuperationstoavoidaccidents (such as collisions) and obstructions to the aircraft.
•  Please do not use the smart flight function near buildings or places with poor GNSSsignal,otherwise it may lead to unexpected situations such as unstable flight trajectory of the aircraft.
• When users use the intelligent flight function, please be sure to abide by the localawsandregulations on privacy

Dronie mode:

After locking the target, click the Fade button on the App interface, the aircraft will alignwiththetarget, and automatically fly away from the target while rising. When the time limit is reachedorclickthe Fade button again, the Fade will be canceled.

Circle mode

After locking the target, click the orbit button on the App interface, and the aircraft will aimatthetarget and continue to orbit. When the time limit is reached or click the orbit button again, theorbitwill be canceled

Rocket mode

After locking the target, click the sky button on the App interface, the aircraft will aietarget,automatically fly directly above the target and start to climb, when the time limit is reachedorclickthe sky button again, the sky mode will be canceled.

Helix mode

After locking the target, click the helix button on the App interface, the aircraft will atarget,automatically climb while flying around the circle and then fly to the top of the target, andthenstartto climb. When the time limit is reached or click the sky button again, the sky mode will becanceled.Note:During the above-mentioned smart flight process, press the pause buttonontheremotecontrol, the aircraft will stop cruising and hover at the current position for standby.

Other instructions

Optical flow position hold

The aircraft is equipped with optical flow position system, which provides bettenvironmentaladaptability

The optical flow positioning system is located at the bottom of the fuselage. Asshownthecamera module ①, optical flow positioning system obtains aircraft positioninformationthrough image.

Optical flow position system

The optical flow position system is typically used in indoor environment when GPSisweakorunavailable. It works best when the altitude is less than 3 meters.

Note

• Please pay attention to the fight environment. Optical flow position systemonlplayasafetyauxiliary role under limited conditions and cannot replace human judgment andcontrol.Theuser should always pay attention to the surrounding environment during the flight, maintain the control of the aircraft and be responsible for the control/behavior
• The measurement accuracy of optical flow positioning system is easily affectedbylightintensity and object surface texture. Therefore, the optical glow position systeminthefollowingscenarios cannot work normally, so it must be used with caution

1. Solid color surface (eg. pure black, pure white, pure red, pure green).
2. A surface (such as ice) that has strong reflections or reflections.
3. The surface of water or transparent objects.
4. The surface of a moving object (e.g. above a stream of people, shrubs or gross blownbyastrongwind)
5. .A scene in which the light changes dramatically and rapid
6. Object surfaces that are particularly dark (light intensity less than 10 Lux) or particularly bright(light intensity greater than 40000 Lux
7. Material surface with strong absorption or reflection of infrared (such as mirror.
8. Surfaces with particularly sparse texture (e.g. electric poles , pipes, etc.).
9. The surface of an object with a high degree of texture repetition such as small checkeredbricksof the same color
10. Small obstacles (such as brunches, wires, etc.).

• Do not block or interfere with the optical flow position system in any way, and ensure that the lens is clear and free of stains
• Avoid flying in rainy and fogs weather or other scenes with low visibility (visibilitylessthan100m).

Replace the propeller

The propellers are already installed on the aircraft when it leaves the factory. If thepropellerisdamaged during use, please replace it as shown in the figure

• Turn the screw counterclockwise to remove the propeller.
  

• Install the propeller and screw, turn the screw clockwise to lock.
  

• When installing the propeller, measure that the arrowonthepropellerisin the ctionasthearrowonthe arm.
  

Note:

• Propellers are vulnerable consumables. If necessary, please purchase accessories separately.
• The propellers on the same motor must be replaced at the same time, otherwisetheremaybealarge vibration, which will affect the flight performance and image quality.
• When replacing the propeller, make sure that the character on the installed propelleristhesame as that of the removed propeller (for example, both are Cowry both are CCW).Makesurethat the arrow mark on the propeller is in the same direction as the arrow ark onthearm.Ifthe propeller is installed incorrectly, the aircraft will not be able to fly normally andmaycauseinjury.
• Due to the thinness of the propeller, please be careful when installing it to preveccidentalscratches
• lease use official propeller accessories.

Compass calibration

The aircraft has a built-in compass, which can ensure that the aircraft maintains aaccurateheadingduring intelligent flight.

If any of the following situations occur, please calibrate the compass of the aircraft:

• Enjoy-Fly2 APP or when prompted to calibrate the compass;
• When the aircraft status indicator indicates that the compass is abnormal (theblueandgreenlights flash alternately;
• When hovering in a circle, or flying straight and deviated from the courseeaselandintimetocalibrate the compass

Enter calibration mode

The mobile device, the aircraft and the remote controller are all connected, andthecompasscalibration is turned on in the Enjoy-Fly2 APP settings of the mobile device (path Aircraft Settings>Click “Calibrate Compass” on the right of “Sensor Calibration”)

When the APP pops up a prompt, please follow the prompt to check the current environmentandkeep away from metal objects, and then click the “Calibrate” icon. at this time

When the aircraft status indicator light turns red and blue and flashes alternately, it entersthecompass calibration mode. At this time, please operate the aircraft according to the prompts of the[APP

. Compass calibration

If the status indicator turns red and stays on for about 6 seconds, it means that thecompasscalibration has failed. Please change the position and follow the above steps to re-calibrate.

1. When the APP prompts to rotate the aircraft horizontally, put the aircraft flat and rotate irizontally. When the status indicator of the aircraft turns red and green and flashes alternately. the horizontal calibration is completed;
   

2. When the APP prompts to rotate the aircraft vertically, turn the nose of the aircrafverticallyupwards and rotate it horizontally. Whentheaircraftstatus indicator turns green (flickering or steady on),the calibration is complete.

Note

• Note After changing the flight site, be sure to calibrate the compass before the first flight.
• During use, if the indicator light of the aircraft is “blue and green lights flashingalternately”, it means that the compass is abnormal, and the compass needs to be calibrated.
• Please keep away from the environment with magnetic field interferencduringcalibration,otherwise the calibration will fail.
• Do not calibrate in areas with strong magnetic fields, such as magnetic minearkinglots,construction areas with underground steel bars, etc.
• hen calibrating, please do not carry ferromagnetic materials around, such as keysandmobilephones.
• Do not calibrate near large pieces of metal.

Switch mode 2 / mode 1

Switch to left hand throttle (Mode 2, American hand) mode
First pull the left joystick to the lowest position, then press and hold the two buttons at thesametimeto turn on the power

When the remote control beeps ‘and the green light is always on, it has successfully switchedtotheleft hand throttle mode. Then release the joystick and buttons, and restart the remote-control toolset.

Switch to right-hand throttle (Mode1, Japanese hand) mode

First pull the right joystick to the lowest position, then press and hold the two button sat thesametimeto to turn on the power.

When the remote control beeps’ and the green light is always on, it has successfully switchedtotheright-hand throttle mode. Then release the joystick and buttons, and restart the remote-control tousle it.

Instructions for Binding the Aircraft to the Remote Control

The set version of the drone has been bound to the remote control when it leaves thefactory,andthe user can use it after turning it on

If the remote control is replaced, or the aircraft and the remote controller are not pairedandboundfor other reasons, please follow the steps below to complete the frequency binding

1. Turn on the power of the aircraft and the remote controller respectively;
2. Use a data cable to connect the remote control and the mobile phone;
3. Open Enjoy-Fly2, enter “Homepage Devices –> My -> Remote Control Pairindclickthe”Remote Control Pairing” option
4. Click Scan in the dialog box to display the name of the scanned aircraft;
5. Please select the name of the aircraft, such as “Drone-xxxxxx”, click “OK” afteronfirmationandwait;
6. When the aircraft status indicator turns green slowly flashing or steady on, imeanstheremotecontrol has been bound to the aircraft.

Battery Usage Instructions and Storage Safety

• Be sure to store the intelligent flight battery in a cool and dry place.
• Improper use, charging or storage of batteries may result in fire and personal injury. Besuretouse the battery according to the following safety guidelines

Notes on battery use:

1. Do not expose the battery to any liquid, do not immerse the battery in water or get it wet.Do not use the battery in rain or wet environment. When the battery comes intocontactwithwater, it may undergo a decomposition reaction, causing the battery to ignitespontaneously,and may even cause an explosion.
2. It is strictly forbidden to use batteries not provided by our company. If user needtoreplaceit, please go to the company’s official website for relevant purchase information. Duetotheuse of non-company. The company is not responsible for battery accidents and flight failures caused by the batteries provided by the company
3. Do not use bulging, leaking or damaged batteries. If the above situation occurs, please contact the company or its designated agent for further processing.
4. Before installing or removing the battery from the aircraft, please keep the batterypoweroff.Do not unplug when the battery power is on battery, otherwise the power connector maybe damaged
5. (5) The battery should be used at an ambient temperature of – 10~45C. If thetemperatureistoo high (higher than 50c ), it will cause the battery to catch fire or even explode. overtemperature low (below-10C ), battery life will be severely compromised.
6. Do not use the battery in a strong static or magnetic field environment. Otherwihebatteryprotection board will fail, which will lead to serious failure of the aircraft.
7. It is forbidden to disassemble or pierce the battery with sharp objects in any way. Otherwise, it will cause the battery to catch fire or even explode..
8. The liquid inside the battery is highly corrosive, if there is leakage, please stayaway. Iftheinternal liquid splashes on the human skin or eyes, please clean it immediately. Flushwithwater for at least 15 minutes and seek medical attention immediately.
9. If the battery is dropped from the aircraft or subjected to external impact, it cannot beusedagain.
10. )lIf the battery accidentally falls into water during flight or other circumstances, please pull out the battery immediately and place it in a safe open place area, keep away fromthebatteryuntil the battery is completely dry. Dried batteries should not be reusedandshouldbediscarded and disposed of properly.
11. Do not place the battery in a microwave or pressure cooker.
12. Do not place battery cells on a flat conductor.
13. It is forbidden to short-circuit the positive and negative poles of the batterywithwiresorother metal objects
14. Do not hit the battery. Do not place heavy objects on the battery or charger.
15. If there is dirt on the battery interface, wipe it off with a dry cloth. Otherwise, it will causepoor contact, which will cause energy loss or failure to charge

Battery storage safety and warnings

1. Do not put the battery close to fire sources such as open flames or heaters.
2. Please keep the battery out of the reach of children.
3. Please ensure that the battery is stored at room temperature: around 25C.
4. For batteries that are not used for a long time, please control the storage voltagebetween7.3V~7.7V.
5. When not in use for a long time, check whether the battery storage status is abnormal everyway weeks, and recharge and discharge activation every two months to maintaintheactivityof the battery.

.Specification

Aircraft

works)
Maximum flight height| 120m (maximum 500m (need to change setting on app)
Operating temperature range| 0~40C

Optical flow system

Operating environment| Surface with clear pattern and adequate lighting ( |ux>15)
---|---
Velocity range| ≤1.5 m/s at 6.6 ft(2 m) above ground
Altitude range| 0.5~5m

axis gimbal

Camera

Battery

APP

according to the environmental conditions
Aerial photography mode| Dronie,rocket,circle,helix
Required operating systems| Andrio 6.0 above, IOS 10.0 above
FPV transmission distance| 3000m

Charger

Remote controller

Packing detail

Before using this product, please check whether the product packagecontainsall the following items. If something is missing, please contact our company or authorized dealers.

• Aircraft x1
  

• Remote controller x1

• Balance charger x1

• Aircraft battery (The number of batteries varies with different configurations)

• USB wire x1

• Date wire x3

• Propellers x4

• Screwdriver x

• Disclaimer and safety guidelines x1

• OperationManual x1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>