SR Smith T15 Series Small Capacity Storage Reel Instruction Manual
- June 15, 2024
- SR Smith
Table of Contents
SR Smith T15 Series Small Capacity Storage Reel
DRAWN SPECIFICATIONS
MODEL NUMBER| REEL END-TO- END LENGTH (A)| MAX. COVER LENGTH
(B)
---|---|---
T15-16| 17’| 16
T15-19| 20’| 19’
T15-20| 21’| 20’
WRITTEN SPECIFICATIONS
Description
S.R.Smith’s storage reel system revolves around the principle idea of
modularity, interchangeability, high strength, non-corrosive components,
excellent mobility, reliable, ease of use and fit all specified pool cover
sizes.
Structure
- Support frame shall consist of type 304 stainless steel (SS304), ASTM-554, 1 ½” square 11-gauge tubing (0.125” wall thickness), strengthened with structural tube gussets welded on two sides of each vertical support. The 1½” square tubing shall be bent, miter cut, and welded together.
- Base plate, ¼” thick, SS304, welded to the bottom of the support frame shall provide strong foundation for wheel-caster assemblies and connector tubing.
- Support frame connector shall consist of SS304, ASTM-554, 1½” square 11 gauge tubing.
Winding Reel
- Shall consist of 4½” OD, 11 gauge (0.125” wall thickness), SS304, ASTM-554 tubing concentrically supported by solid 1” OD X 5¾” long round shaft with machined squared end securely welded to ¼” thick tube end cap. Shaft shall be compatible with S.R.Smith’s automatic motorized re-winder, the EOS.
- Winding reels longer than 20’ long shall have center reinforcement to help support the added weight of pool cover(s) and to prevent bowing or bending.
- Tube end caps and all connector points on the winding reel shall be securely fastened with ¼” non-corrosive, stainless steel blind rivets.
- 100% stainless steel pillow block with 1” bore roller bearings. Bearing housing shall be equipped with zerk fitting for lubrication. Military spec. stainless steel hardware shall be provided with the bearings.
Mobility
Shall be provided by four (4), single-piece construction, 60 durometer,
solid one-piece urethane wheels, assembled to SS304, heavy duty, 1,650 lb load
capacity, swivel casters. SS304 axle and self-lubricating and non-corrosive
Delrin bearings and bushing shall be used to assemble the wheels and casters
together.
Restraining/Braking Device
All stainless steel, high strength, fast turning, Acme threaded nut and
screw housed in SS304 tubing and supported SS304 bracket, installed diagonally
at each end of the storage reel shall provide the necessary lift to halt
storage reel movements. Contact pad shall be self-adjusting for uneven terrain
and be made of ¾” thick, 9” square, long wearing UHMW-PE material fastened to
¼” thick, 9” square, SS304 plate with SS304 hardware.
Winding Tool
Shall be made of SS304, 11 gauge (0.125”) wall thickness, ASTM-554, 1” X 1”
X 13” long structural tube welded to 1” X 1” tubing.
Hardware
▪ All 100% SS304 ⅜”-16 thread.
▪ All 100% SS304 ¼” diameter blind rivets.
Product Numbers and Shipping Weights
| MODEL NUMBER | DESCRIPTION | SHIPPING WEIGHT |
|---|---|---|
| T15- 16 | EnergySaver T15 Series Storage Reel, 16’ Wide | 155 lbs (70 |
kg)
T15- 19| EnergySaver T15 Series Storage Reel, 19’ Wide| 178 lbs (81
kg)
T15- 20| EnergySaver T15 Series Storage Reel, 20’ Wide| 185 lbs (84
kg)
Specification Number:| SRS-1104| ****
S.R. Smith, LLC
1017 SW Berg Parkway Canby, Oregon 97013
Tel: 1 800-824-4387
---|---|---
Product Description:| THERMAL POOL COVER STORAGE REELS
S.R. Smith Part Number:| T15-16, T15-19, T15-20
Revision:| A1| Date: 7/30/2020
Written By:| H. Tunggal| Date: 3/16/2017
Approved By:| | Date:
Proprietary and confidential: The information contained in this specification
is the sole property of S.R. Smith LLC. Any reproduction in part or whole
without the written consent of S.R. Smith LLC is prohibited.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>