ALL-O-MATIC AVW-450 4 Steel Wheels User Manual
- June 16, 2024
- ALL O MATIC
Table of Contents
ALL-O-MATIC AVW-450 4 Steel Wheels
Product Information
Specifications
- Wheels : 4 and 6 nylon and chrome solid steel v-wheels
- Gate Size : Suitable for gates of various sizes
- Gate Weight : Suitable for gates of various weights
- Bearing Type : Lubricated, double-sealed bearings
- Operation: Quiet operation
- Maintenance: Minimal maintenance required
- Wheel Boxes : Clear zinc plated for added protection
Product Usage Instructions
Installing the Wheels
To install the wheels on your gate, follow these steps:
- Identify the appropriate wheel size based on your gate’s weight and size.
- Using the provided bolts, attach the wheels to the designated spots on your gate. Make sure they are securely fastened.
- If you are using wheel boxes, attach them to the gate using the appropriate bolts.
Operating the Overhead Gate Operator
The overhead gate operator is designed to provide automatic gate operation. Follow these instructions to operate it:
- Ensure that the gate is properly installed and the wheels are securely attached.
- Connect the gate operator to a power source as per the manufacturer’s instructions.
- Use the provided remote control or control panel to open or close the gate.
- The gate operator will move the gate smoothly and quietly, thanks to the lubricated, double-sealed bearings in the wheels.
- Regularly inspect the gate operator for any signs of damage or wear and perform any necessary maintenance as instructed in the user manual.
Maintenance
To ensure the smooth operation of your overhead gate operator, follow these maintenance guidelines:
- Regularly inspect the wheels and wheel boxes for any signs of damage or wear. Replace them if necessary.
- Keep the bearings lubricated according to the manufacturer’s recommendations.
- Clean the gate and the wheels regularly to remove any dirt or debris that may hinder their operation.
- Check all bolts and fasteners to ensure they are tight and secure.
FAQ
- Q: What is the capacity of the 4 steel wheel?
- The 4 steel wheel has a capacity of 3,000 lbs.
- Q: Are the wheels suitable for gates of all sizes?
- Yes, we offer a range of wheel sizes to fit gates of various sizes.
- Q: How do I know which size wheel to choose for my gate?
- You can determine the appropriate wheel size based on your gate’s weight and size. Refer to the product specifications or consult with our customer support for assistance.
- Q: Do I need to lubricate the bearings?
- Yes, it is recommended to lubricate the bearings regularly as per the manufacturer’s instructions for smooth operation.
- Q: Can I use the overhead gate operator for both sliding and swinging gates?
- Yes, the overhead gate operator is suitable for both sliding and swinging gates.
- Q: How can I contact customer support?
- You can reach our customer support at 818-787-1988 for any further assistance or inquiries.
WHEELS
GATE OPERATOR HARDWARE & ACCESORIES
We offer a range of 4″ and 6″ nylon andchrome solid steel v-wheels to fit your gate’s size, weight, and usage. These wheels have lubricated, double-sealed bearings for quiet operation and minimal maintenance. We also have 4″ and 6″ clear zinc wheel boxes for added protection.
Parts & Drawing
PART NUMBER / PART NAME
AVW-450 / 4″ STEEL WHEEL – 1/2 BOLT (3,000 Lbs. CAPACITY
AVW-665 / 6″ STEEL WHEEL – 5/8 BOLT (5,000 Lbs. CAPACITY)
AVW-665T / 6″ STEEL NARROW WHEEL – 5/8 BOLT
AWMB-4 / 4″ STEEL WHEEL BOX – CLEAR ZINC
AWMB-6 / 6″ STEEL WHEEL BOX – CLEAR ZINC
AWP4-B / 4″ PLASTIC WHEEL WITH BEARING
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>