ALL-O-MATIC AOM-RED EYE Photoelectric Sensor Instruction Manual
- June 12, 2024
- ALL O MATIC
Table of Contents
ALL-O-MATIC AOM-RED EYE Photoelectric Sensor
The AOM-RED EYE is a high-performance photoelectric sensor designed for various applications. It features a visible red class2 laser beam for easy alignment with the reflector, excellent optical performance with a sensing range of up to 55 feet (100 feet with optional reflector), and a non-sphere optical lens that eliminates stray light and interference from other light sources. The sensor also has a red LED indicator for easy installation and diagnosis, as well as options for LIGHT ON/DARK ON settings. It is UL325 compliant and has a protection grade of IP65.
Product Usage Instructions
To use the AOM-RED EYE sensor, follow these steps:
- Ensure that the sensor is properly connected to a power supply of 10-30VDC.
- Choose the desired action mode (Light ON/Dark ON) by adjusting the potentiometer.
- Align the sensor with the reflector using the visible red class2 laser beam for accurate aiming.
- Make sure there are no obstructions between the sensor and the detection object.
- For UL 325 monitored function, set the sensor to LIGHT ON mode.
- Refer to the wiring diagram provided in the user manual to connect the sensor to the appropriate device or board.
- Verify the working status of the sensor using the red LED indicator.
- Ensure that the ambient light conditions (sunlight, incandescent lamp) are within the specified range.
- Observe the recommended ambient temperature and humidity range for optimal performance.
- Take necessary precautions to protect the sensor from overvoltage, overcurrent, and reverse polarity.
For more detailed information and optional accessories, please refer to the complete AOM-RED EYE Photoelectric Sensor Instruction Manual available at www.allomatic.net.
Features
AOM-RED EYE Features
- Visible red class2 laser beam with good aim allows installer to easily align with the reflector.
- Excellent optical performance. Sensing range as far as 55 feet (100 feet with optional 4” square reflector).
- Non-sphere optical lens totally eliminates stray light and overcomes the interference from light sources (ie: sunlight).
- Red LED detects working status for easy installation and diagnosis.
- LIGHT ON/DARK ON options.
- Protection grade: IP65(IEC)
- UL325 compliant
Safety Tips
- Do not look directly at the laser beams
- Do not aim at a person’s eye at close range
- Mount laser beam at a height above or below eye level
AOM-RED EYE Specifications
| Model | AOM-RED EYE |
|---|---|
| Detection object | Non-transparent objects of Min.Φ2.5” |
| Detection distance | 55 Feet (*1) |
| Power supply | 10-30VDC |
| Current consumption | Max. 60mA |
| Light source | Laser (Modulated:650nm) |
| Action mode | Light ON/Dark ON options through potentiometer |
| Control output | Relay output |
(contact rating:30VDC,1A or 120VAC,1A resistant load;contact component:1C)
Response time| Max. 20ms
Protection circuit| Overvoltage protection; Overcurrent protection;
Reverse polarity protection
Indicator| Power LED: green – Action LED: red
Ambient light| Sun:60,000LuX; Incandescent lamp: 3,000LuX
Ambient temperature| -30~ +65°C (non-freezing)
Ambient humidity| 35-85% RH
Material| Case:ABS – Lens:PMMA – Cable:PVC
Protection rating| IP65（IEC）
Cable Length| 10 feet
Accessories| Mounting bracket and hardware (Nut: M4×30)
Notes : The sensing distance set range between the reflector and sensor depends on AOM-RR03. Reflector type varies with the sensing distance (refer to page 5 for optional reflector).
Wiring diagram
- Wiring diagram for BLDC and TORO24 boards. (RED, BLUE AND GOLD BOARDS)
- WIRING DEVICE ACROSS DRIVEWAY / CLOSE DIRECTION (MON_CLOSE)
- WIRING DEVICE BACK OF GATE/OPEN DIRECTION (MON_OPEN)
Wiring diagram for AC boards. (WHITE BOARDS)
- WIRING DEVICE ACROSS DRIVEWAY / CLOSE DIRECTION (MON_CLOSE)
- WIRING DEVICE BACK OF GATE / OPEN DIRECTION (MON_OPEN)
LIGHT ON Mode Relay Output
LIGHT ON Setting Wiring Diagram
DARK ON Mode Relay Output
DARK ON setting wiring diagram
Mechanical Dimensions
Reflector’s Dimensions
Mounting
AOM-RED EYE is mounted using a bracket and the hood box. The bracket has a front and side mounting option to attached to a post or column. The sensor attaches to the hood box using two screws. The same is for the hood box to the mounting bracket. One of the screws on the hood box and mounting bracket have a slotted hole for vertical and horizontal adjustment for alignment.