ALL-O-MATIC SL-100FPAC Slide Gate Operator Instructions
- June 12, 2024
- ALL O MATIC
Table of Contents
ALL-O-MATIC SL-100FPAC Slide Gate Operator
Product Information
| ITEM NO. | DESCRIPTION | PART NUMBER | QTY. |
|---|---|---|---|
| 1 | FRAME ONLY | SL-103FM | 1 |
| 2 | GEARBOX | GBX-101 | 1 |
| 3 | GEARBOX PULLEY | PLY-25A | 1 |
| 4 | GEARBOX LIMIT SPROCKET | 41B12X78 | 1 |
| 5 | GEARBOX DRIVE SPROCKET | 41B22X78 | 1 |
| 6 | 1/2 HP AC MOTOR | MTR-1050 | 1 |
| 7 | 1/2 HP AC MOTOR PULLEY | PLY-2 | 1 |
| 8 | 1/2 HP AC MOTOR BELT | 4L-260 (AX24) | 1 |
| 9 | 1/2 HP AC MOTOR WIRE HARNESS | MTR-H1050 | 1 |
| 10 | CONTROL BOX ASSEMBLY | CBX-AY103 | 1 |
| 11 | CONTROL BOX | CBX-103 | 1 |
| 12 | CONTROL BOX COVER | CBC-913 | 1 |
| 13 | CONTROL BOX RADIO RECEIVER STRIP | COM-1003 | 1 |
| 14 | CONTROL BOX RESET PUSH BUTTON | COM-1004 | 1 |
| 15 | CONTROL BOX ALARM BUZZER | COM-1005 | 1 |
| 16 | CONTROL BOX ON/OFF POWER SWITCH | COM1000 | 1 |
| 17 | CONTROL BOX 14 PIN TERMINAL STRIP | COM-1002 | 1 |
| 18 | CONTROL BOX AC CONTROL BOARD | ACPCB-UL | 1 |
| 19 | LIMIT SWITCH BOX ASSEMBLY | LSB-AY103 | 1 |
| 20 | LIMIT SHAFT SPROCKET | 41B15X58 | 1 |
| 21 | LIMIT SHAFT | LST-100 | 1 |
| 22 | LIMIT SHAFT BEARINGS – 5/8 | BRG-6202B | 2 |
| 23 | LIMIT SWITCH BOX | LSB-103 | 1 |
| 24 | LIMIT SWITCH BOX PLATE | LSP-100FP | 1 |
| 25 | LIMIT SWITCH BOX PLATE SPRINGS (2 PCS) | SPG-7575 | 2 |
| 26 | LIMIT SWITCH | COM-1007 | 2 |
| 27 | LIMIT SWITCH PLASTIC NUT | COM-1008 | 2 |
| 28 | LIMIT SWITCH WIRE HARNESS | 1 | |
| 29 | POWER SUPPLY 110VAC OUTLET | COM-1001 | 1 |
| 30 | POWER SUPPLY WIRE HARNESS | PSH-103 | 1 |
| 31 | FOOT PEDAL RELEASE ASSEMBLY | FPR-AY100 | 1 |
| 32 | FOOT PEDAL RELEASE | FPR-100 | 1 |
| 33 | FOOT PEDAL RELEASE KILL SWITCH | COM-1007P | 1 |
| 34 | FOOT PEDAL PAD LOCK PLATE | PLP-100FP | 1 |
| 35 | FOOT PEDAL HINGE PIVOT BRACKET | HPB-100FP | 1 |
| 36 | FOOT PEDAL HINGE BRACKET | HBK-100FP | 1 |
| 37 | FOOT PEDAL HINGE SPLIT BRACKET | HSB-100FP | 1 |
| 38 | FOOT PEDAL SPRING | SPG-100FP | 1 |
| 39 | FOOT PEDAL SQUARE HINGE SHAFT | SHS-100FP | 1 |
| 40 | LOOP RACK | LPR-2 | 1 |
| 41 | LOOP RACK HARNESS 20 | LPR-H102 | 1 |
| 42 | EXTERIOR PLASTIC COVER | EPC-100FP | 1 |
| 43 | PLASTIC CHAIN IDLER | COM-101 | 2 |
| 44 | CHAIN BRACKET | COM-1009 | 2 |
| 45 | CHAIN BOLT | COM-1010-1 | 2 |
INSTRUCTION
ALL-O-MATIC, Inc.
7820 Gloria Ave. Phone: 818-787-1988
Van Nuys CA, USA 91406
EMAIL: fortino@allomatic.net
THE INFORMATION DISCLOSED HEREIN WAS ORIGINATED BY AND IS THE PROPERTY OF ALL-O-MATIC, INC. AND ALL PATENT, PROPRIETARY, DESIGN, USE, SALE, MANUFACTURING, AND REPRODUCTION RIGHTS THERETO ARE RESERVED BY ALL-O-MATIC, INC.
DIMENSIONS ARE IN INCHES
BREAK SHARP EDGES .10-.40
MACHINED SURFACE FINISH IS
1.6 MICROMETERS
DO NOT SCALE DRAWING
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>