Si4732 ATS-25 MAX Full Band Radio Receiver User Manual
- June 16, 2024
- Si4732
Table of Contents
Si4732 ATS-25 MAX Full Band Radio Receiver
Manual-V52a
User manual Vers. 5.2a for receiver $14735/32 _ ESP32_2.
inch Display
Screen for selecting the modulation modes / types to be used, with the
frequency used at the top. Press the button to use the mode indicated on it.
Screen for selecting the tuning step to use, with indication of the current
frequency at the top. Click the button to use the tuning step indicated on it.
Screen for selecting the broadcasting band to use, with the current frequency
in use indicated at the top. Press the button to use the band indicated on it.
Screen for selecting the HAM amateur band to use, with indication at the top
of the current frequency in use. Press the button to use the band indicated on
it.
Screen for choosing the Bandwidth to use, with the current frequency in use
indicated at the top. Press the button to use the filter indicated on it.
Screen accessed with the FREQ key for direct manual entry of a frequency.
Setup screens accessible via the SETUP button
Select, deselect or change the selection of the respective element by clicking
on it. The RESET button while holding down the button resets all settings to
their default values. If your receiver is not working properly, you can reset
the encoder settings while turning on the receiver. The modified parameters
are highlighted in red and when you press the EXIT button the system will ask
you to confirm the saving of the new settings
Info screens on the INFO button.
It shows the parameters used by the receiver, information about the firmware,
Si473x chip
Screensaver
The activation time can be set in the SETUP menu