SHARPER IMAGE Insulated Heated Travel Mug with USB Power Instruction Manual
- June 13, 2024
- Sharper Image
Table of Contents
HEATED MUG
INSULATED WALLS + USB POWER
CONTENTS
- Mug
- Heating Sleeve
- Lid
- USB Cable
SAFETY WARNINGS:
PLEASE READ BEFORE USE
- Do NOT plug in the mug if empty. Heating the mug while empty can damage the heating
- Not a children’s item. Keep out of reach of children.
- ONLY use the provided cord.
- Use this item only for its intended purpose.
- Do not expose to sunlight for extended periods of time.
- Thoroughly inspect all parts or components before every use. If the product appears worn, frayed/splintered, cracked, or broken in any manner, discontinue use and discard immediately.
USING YOUR MUG CLEAN
- Wipe the heating sleeve with a clean, dry cloth.
- Hand wash or use a dishwasher to clean the mug and lid.
FILL
- Fill your mug with your favorite beverage.
- Press the lid into place securely.
- Clean and dry any liquid off the outside of the mug and lid.
CONNECT
- Turn on the heat by plugging the provided cable into the heating sleeve and then connecting the USB side of the cable into a USB power port.
- Connect the heating sleeve to the mug by twisting the mug clockwise in the sleeve.
- Disconnect the sleeve by twisting the mug counterclockwise.
TIPS
- For maximum heating performance, use a 24W USB power adapter.
- The cable fits flush in the indentation in the heating sleeve so you can easily slide it in and out of all standard vehicle cup holders.
- The travel lid fits snucgly on the top of the mug. The sliding panel on top helps prevent spills. Close the panel when not drinking.
- Sleeve fully heats liquids from room temperature to max heat within approximately 90 minutes. Double-insulated mug will keep liquids hot for approximately 2 hours without the sleeve being plugged in.
FCC instruction:
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.”
For a Class B digital device or peripheral, the instructions furnished the
user shall include the following or similar statement, placed in a prominent
location in the text of the manual:
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
KEEP THIS INSTRUCTION MANUAL AS IT CONTAINS IMPORTANT INFORMATION FOR FUTURE
REFERENCE.
DUE TO CONTINUOUS PRODUCT IMPROVEMENTS, THE PICTURES ON THIS MANUAL MAY DIFFER
SLIGHTLY FROM THE ACTUAL PRODUCT.
SHARPER IMAGE® NAME AND LOGOS (INCLUDING THE 77 LOGO AND TOMORROW’S TOMORROW)
ARE TRADEMARKS OR REGISTERED TRADEMARKS. DISTRIBUTED BY AND 0 2021
MERCHSOURCE, LLC. IRVINE, CA 92618. ALL RIGHTS RESERVED.
PRINTED IN CHINA.