LIVARNO 407997 QA734 Aluminium Door Insect Screen Owner’s Manual

June 11, 2024
LIVARNO

LIVARNO 407997 QA734 Aluminium Door Insect Screen

407997 QA734 Aluminium Door Insect Screen
Owner’s Manual PDF ONLINE
www.lidl-service.com
ALUMINIUM DOOR INSECT SCREEN
Installation and safety instructions

407997 QA734 Aluminium Door Insect Screen

LIVARNO 407997 QA734 Aluminium Door Insect Screen - fig
2

LIVARNO 407997 QA734 Aluminium Door Insect Screen - fig
3

LIVARNO 407997 QA734 Aluminium Door Insect Screen - fig
4

LIVARNO 407997 QA734 Aluminium Door Insect Screen - fig
6

Information status : 09/2022
Ident.-Nr.: 407997 092022 – QA734
Required tools

LIVARNO 407997 QA734 Aluminium Door Insect Screen - fig
8

LIVARNO 407997 QA734 Aluminium Door Insect Screen - fig
9

Contents

For spare parts orders: https://www.smartmaxx.info/c/ersatzteile
Legend| Warning
---|---
| Do not lean against the product
| Do not leave children unattended
| Note

Introduction Congratulations!

With your purchase, you have chosen a high-quality product. Be sure to familiarise yourself with the product before installing it and putting it into operation. Please read the following installation and safety instructions carefully. Use the product only as described and for the specified areas of application. Keep this manual in a safe place. Please also hand over all documents to third parties when passing on the product.

Proper use

This article is intended to provide protection against flying insects in private homes. Any use other than the one described above or modifications to the product are not permitted and may result in injury and/or damage to the product. The manufacturer accepts no liability for damage resulting from improper use or damage caused during installation. This product is not intended for commercial use. Using this product during frost may damage it.
SHOULD YOU HAVE ANY PROBLEMS WITH OR QUESTIONS ABOUT THE PRODUCT OR ITS INSTALLATION, PLEASE ALWAYS CONTACT OUR SERVICE CENTRE FIRST. WE WILL GLADLY HELP YOU OUT.

Technical data

Max. kit dimensions: 100 x 210 cm
Max. door frame interior dimensions:
94 x 206 cm
Installation depth: 14 mm
WHEN UNPACKING THE PRODUCT, MAKE SURE THAT YOU DO NOT ACCIDENTALLY THROW AWAY ANY MOUNTING MATERIAL. IMMEDIATELY AFTER UNPACKING, CHECK THE SCOPE OF DELIVERY FOR COMPLETENESS AND THE PERFECT CONDITION OF THE PRODUCT AND ALL PARTS. DO NOT INSTALL THE PRODUCT IF THE SCOPE OF DELIVERY IS INCOMPLETE.

Safety instructions

WARNING! LIFE-THREATENING DANGER AND RISK OF INJURY FOR CHILDREN AND TODDLERS!
Never leave children alone or unattended in the vicinity of the product and its packaging materials. The packaging and contents pose risks of suffocation, strangulation and injury. Children are not aware of these dangers. Keep children away from the product at all times. The product is not a toy.
WARNING! RISK OF FALLING! LIFE-THREATENING DANGER AND RISK OF INJURY, PARTICULARLY FOR CHILDREN AND TODDLERS!
Do not lean against the product! This product is not a reliable exit barrier and must not be used as a replacement for a closed window or door. The product may give way if it is leaned against, creating a risk of falling. Insect screens do not provide effective protection against falling out of windows or doors. Keep children away from open windows and doors and never leave them unattended.
The product should only be attached to windows and doors which can be accessed safely due to the risk of falling. Do not lean out of the window / door or against the product and do not push against the insect screen from inside when attaching, removing or cleaning the product.
CAUTION! RISK OF INJURY!
Incorrect assembly and the use of unsuitable tools can present a risk of injury. Use work gloves if necessary.
The product should only be assembled and operated by individuals who have read the instructions and who have the physical and mental capacity to assemble the product safely by themselves.
Incomplete assembly kits or damaged parts may under no circumstances be used for assembly. This could impair the operation and safety of the product. Keep the product and all flammable parts away from heat sources and fire.

Installation

M1: Door opening to the left (1 – 32)
M2: Door opening to the right (1 – 32)
Observe the safety instructions

Cleaning and care

• Never use corrosive or abrasive cleaning agents.
• Clean the mesh and frame with a lint-free, slightly moistened cloth.
• Clean the insect screen door regularly.
• If necessary, use a mild detergent.

Disposal

The packaging is made from environmentally friendly materials. Dispose of it using local recycling containers. You can find out how to dispose of the used up product by contacting your municipality or town council.

Installation video

You can find an animated installation video at: www.smartmaxx.info

Manufacturer / Service

3-year warranty.
For service and warranty claims, please contact:
Smartmaxx GmbH
Schulzstraße 2c, DE -85579 Neubiberg, GERMANY
Hotline: +49 89 678 45 06 – 0
E-mail: office@smartmaxx.info
Please have the receipt and the item number
IAN 407997_2207 as proof of purchase ready for all inquiries.

FAQ

Is this insect screen door suitable for mounting between door and roller shutter?****

– Yes, provided that the space between door and roller shutter is sufficient. The corresponding dimensions can be found in the respective product information/technical data.

What can I do if parts are missing from the kit or defective?****

– If you find that a part listed in the scope of delivery is missing or defective, please inform us by sending the item number of your product and the purchase receipt via e-mail to office@smartmaxx.info or use our contact form. Within the warranty period, you will receive a replacement free of charge.

What is the best way to shorten aluminium profiles?****

– Preferably, use an iron saw to shorten aluminium profiles. Place the parts in a mitre box, fix them in place without crushing them, if necessary with a screw clamp, to achieve a precise, straight cut. As a safety precaution, we recommend wearing work gloves. Width B and height H are the inside dimensions of the door (from one interior edge of the door frame to the other).

What is important when installing the clamping strips?****

– The mesh must not be tensioned additionally when mounting the clamping strips. The clamping process causes the fabric to tension itself. Additional tension can cause distortion of the frame. We recommend to first fix the clamping strips to the broad sides and then to the longitudinal sides of the frame.

Note:
Subject to mistakes, changes and setting errors.
Download the current version of the instructions as a PDF file at www.smartmaxx.info

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals