Fongwah S9-EU-00-12 USB RFID Card Reader User Guide
- June 16, 2024
- Fongwah
Table of Contents
Quick start guide
- Connect the Reader to the PC.
- Place the card in the reading area of the Reader.
The decimal UID of the card will be output at the cursor position on the PC
monitor.
4 bytes UID: 10 decimal digits
7 bytes UID: 17 decimal digits
Note:
- This reader is used as a USB keyboard emulator. It can only read the UID of the card.
- Frequency: 13.56 MHz
- Protocols: ISO 14443A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>