Motorola H375 Bluetooth Headset Quick Start Guide
- June 16, 2024
- Motorola
Table of Contents
- Motorola H375 Bluetooth Headset
- BEFORE YOU BEGIN
- CHARGE
- START BLUETOOTH FEATURE
- PAIR
- TEST AND USE
- USING YOUR H375
- TURNING HEADSET ON AND OFF
- WEARING THE HEADSET
- CHANGING FOR USE ON OTHER EAR
- MAKING CALLS
- CHARGING STATUS
- OPERATING STATUS
- AUDIO TONES
- TROUBLESHOOTING
- Motorola, Inc.
- Support.
- FAQs
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Motorola H375 Bluetooth Headset
BEFORE YOU BEGIN
Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.
Take a moment before you get started to familiarize yourself with your new H375 Headset.
CHARGE
Your Headset’s Battery
- Plug the Motorola charger into the end of the headset.
- The indicator light turns on when the battery is charging. It may take up to 30 seconds for the light to turn on. When the headset’s battery is fully charged (about 3 hours), the indicator light is steadily lit in blue.
- Unplug the charger from the headset.
Note: The headset is not functional while charging.
START BLUETOOTH FEATURE
Your Phone
Your phone’s Bluetooth® feature is off by default. To use your headset, you must turn on the Bluetooth feature on your phone.
For most Motorola phones (at the main menu):
- Press (Menu) > Settings > Connection > Bluetooth Link > Setup.
- Scroll to Power.
- Select Change.
- Scroll to On.
- Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on until you turn the feature off.
Note: These steps are for most Motorola phones. For other phones, see your phone’s user’s guide.
PAIR
Your Headset
Before you can use your headset, you must pair (link) it with your phone.
Step A – ENSURE THE HEADSET IS IN PAIRING MODE
Power on the headset by pressing the Power button to initiate easy pairing. After a few moments, the indicator light will be steadily lit in blue to indicate the headset is in pairing mode.
If the headset does not enter pairing mode, see TROUBLESHOOTING for help.
Step B – SET YOUR PHONE TO LOOK FOR YOUR HEADSET
- For most Motorola phones: On your Motorola phone, press (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists Bluetooth devices it finds.
- Select Motorola H375.
- Select OK or Yes to pair your headset with your phone.
- Enter the passkey: 0000
- Select OK.
- When your headset successfully pairs with your phone, the indicator light flashes purple and blue.
Note: These steps are for most Motorola phones. For other phones, see your phone’s user’s guide.
TEST AND USE
- Your phone and headset are now paired and connected to make and receive calls.
To make a call:
- Place the headset ear buds on your ear with the ear hook also securely fitted over your ear.
- On the phone, dial the number you want to call and press SEND key on your phone.
- If your phone and headset are successfully paired, you will hear ringing on the headset.
After you have successfully paired your phone and headset, you don’t need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone’s Bluetooth feature is ON.
- To save battery power, turn OFF the headset when you don’t use it for an extended time by pressing and holding the Power button.
USING YOUR H375
See “Features and Functions Guide” on the reverse side for information on using your H375
Features and Functions Guide
IMPORTANT: Be sure to first follow the
Quick Start Guide on the reverse side of this guide to complete initial setup of your H375.
TURNING HEADSET ON AND OFF
- To turn your headset on , press and hold the Power button until the indicator light flashes.
- To turn your headset off , press and hold the Power button until the indicator light flashes rapidly and then turns off.
WEARING THE HEADSET
Your H375 headset is supplied with both round- and oval-shaped earbuds to provide personal choice for maximum comfort.The earbud is fitted onto the end of your headset’s earpiece speaker, and placed onto your ear when using your headset as shown.
To wear your headset, flex the earhook and loop it over your ear as shown.
CHANGING FOR USE ON OTHER EAR
You can wear your H375 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear:
- Firmly lift and pull the top of the earhook up and off speaker stem as shown.
- Flip the headset over.
- Firmly attach the earhook to the speaker stem as shown.
CHANGING VOLUME BUTTON ORIENTATION
You can also change the orientation of the volume buttons on your headset.
- Turn the headset power off.
- Press and hold the Volume button you want to assign as the “volume up” button and the Power button to power on the headset. The indicator light flashes three times in blue.
MAKING CALLS
Function | Action |
---|---|
Make a voice dial call | Tap the Call button and speak the name after the tone |
End a call | Tap the Call button |
Answer a call | Tap the Call button |
Ignore a call | Press and hold either Volume button until incoming call stops |
ringing
Redial last call| Press and hold the Call button for at least 2 seconds until
you hear a beep
Mute or unmute a call| Tap both Volume buttons
- Note: Some features are phone/network dependent.
- Note: Your H375 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone’s user’s guide for more information.
CHECKING BATTERY LEVEL
To check battery level while headset is powered on, press and hold both volume buttons for 5 seconds until you hear a beep. The indicator light displays the following charge status for a few seconds.
Indicator Light | Charge Level |
---|---|
Red | Battery at less than 10% charge |
Purple | Battery at 10%-80% charge |
Blue | Battery at more than 80% charge |
CHARGING STATUS
With the Charger Plugged In
Indicator Light | Charge Status |
---|---|
Red | Charging (battery level less than 10% charge) |
Purple | Charging (battery level more than 10% charge) |
Blue | Charging complete |
OPERATING STATUS
With No Charger Plugged In
Indicator Light | Headset Status |
---|---|
Off | Power off |
Three blue flashes | Powering on/off |
Steady blue | Pairing mode |
Rapid blue/purple flashes | Pairing/connect successful |
Quick blue flash | Incoming/outgoing call |
Slow blue flash | Connected (on a call)/Standby (not on a call) |
Slow red flash | Idle (not connected to phone) |
Slow purple flash | Connected call muted |
Quick red flash | Low battery |
Note: After 30 minutes on a call or of inactivity, the light stops flashing to conserve power, but the headset remains on.
AUDIO TONES
Audio Tone | Headset Status |
---|---|
Ascending tone | Powering on |
Descending tone | Powering off |
Two ascending tones | Pairing successful |
Ring tone | Incoming call |
Two short tones when pressing Volume button | Volume at minimum/maximum |
High/low tones repeated every 60 sec. | Low battery |
No audio indications | Out of range, deteriorating quality |
Three ascending tones | Connected call |
Three descending tones | Ended call |
Two rapid ascending tones | Mute enabled |
Two rapid descending tones | Mute disabled |
TROUBLESHOOTING
My headset will not enter pairing mode.
- Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, first turn off the other device, then turn your headset off and on. The indicator light becomes steadily lit
- in blue indicating the headset is now in pairing mode.
My phone doesn’t find my headset.
- Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3).
My headset worked before but now it’s not working.
- Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3).
European Union Directives Conformance Statement
Hereby, Motorola declares that this product is in compliance with:
- The essential requirements and other relevant provisions of Directive 1999/5/EC.
- All other relevant EU Directives.
The above gives an example of a typical Product Approval Number.
You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your product’s label in the “Search” bar on the website.
Motorola, Inc.
Consumer Advocacy Office
- 1307 East Algonquin Road
- Schaumburg, IL 60196
- www.hellomoto.com
- 1-877-MOTOBLU
- 1-888-390-6456
(TTY/TDD United States for hearing impaired)
- Guide Number: 6809513A04-O
MOTOROLA and the Stylized M Logo are registered with the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners.
- © Motorola, Inc. 2007.
Support.
If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/Bluetoothsupport
FAQs
How do I turn off my Motorola H375 headset to save battery power?
Press and hold the Power button to turn off the headset when not in use for an extended time.
How do I change the ear side of the headset (left or right)?
To change from the right ear to the left ear, follow the provided instructions in the guide.
How can I change the orientation of the volume buttons on my headset?
Follow the guide's instructions to change the orientation of the volume buttons.
How do I check the battery level on my Motorola H375 headset?
Press and hold both volume buttons for 5 seconds while the headset is powered on to check the battery level.
What do the different indicator light colors and patterns mean?
Refer to the guide for a detailed explanation of indicator light colors and patterns.
How do I power on the Motorola H375 Bluetooth Headset?
To turn on the H375 headset, press and hold the Power button until the indicator light flashes.
How do I power off the Motorola H375 Bluetooth Headset?
To turn off the H375 headset, press and hold the Power button until the indicator light flashes rapidly and then turns off.
How do I change the earbuds on my Motorola H375 Bluetooth Headset?
The H375 headset comes with both round- and oval-shaped earbuds. Simply remove and replace the earbud to customize for maximum comfort.
Can I wear the Motorola H375 Bluetooth Headset on either ear?
Yes, the H375 headset is designed for versatility. You can wear it on either the left or right ear. Instructions for changing the ear side are provided in the guide.
How do I make voice dial calls with the Motorola H375 Bluetooth Headset?
To make a voice dial call, tap the Call button and speak the name after the tone.
How do I end a call using the Motorola H375 Bluetooth Headset?
To end a call, simply tap the Call button.
How do I answer incoming calls with the Motorola H375 Bluetooth Headset?
To answer an incoming call, tap the Call button.
Reference:Motorola H375 Bluetooth Headset Quick Start Guide- device.report
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>