JET JWBS-15 Lower Blade Guide Assembly Installation Guide
- June 16, 2024
- JET
Table of Contents
JET JWBS-15 Lower Blade Guide Assembly
Product Information
Specifications:
- Stock Number: 714600-7
- Compatible Products: Lower Blade Guide Support Assembly | JWBS15-1137
Product Usage Instructions
Installation
- Make sure the JWBS-15 Bandsaw is powered off and unplugged.
- Remove the existing lower blade guide assembly by following the instructions provided in the JWBS-15 Bandsaw user manual.
- Take the new JWBS-15 Lower Blade Guide Assembly out of its packaging.
- Align the assembly with the corresponding mounting holes on the bandsaw.
- Securely fasten the assembly using the provided socket head cap screws (TS-1503081).
- Ensure the assembly is securely attached and does not interfere with the movement of the blade.
Adjustment
Proper adjustment of the JWBS-15 Lower Blade Guide Assembly is essential for optimal performance. Follow these steps to adjust the assembly:
- Loosen the knob (JWBS15-1137-508) on the assembly to release tension.
- Adjust the position of the lower blade guide to align it with the blade.
- Tighten the knob to secure the assembly in place.
- Check the alignment and ensure there is proper clearance between the blade and the guide.
Maintenance
To ensure the longevity and performance of the JWBS-15 Lower Blade Guide Assembly, regular maintenance is recommended:
- Inspect the assembly for any signs of wear or damage periodically.
- Clean the assembly using a soft cloth or brush to remove any dust or debris.
- If necessary, lubricate the moving parts with a suitable lubricant as recommended in the JWBS-15 Bandsaw user manual.
Product Images
Products in this set
Lower Blade
Guide Support Assembly JWBS15-1137
Additional Information:
The JWBS-15 Lower Blade Guide Assembly is a replacement part for the
JWBS-15 Bandsaw. It is designed to guide the lower blade during cutting
operations, ensuring accurate and precise cuts.
Required Tools
- Socket Head Cap Screw TS-1503081
- Knob JWBS15-1137-508
- Spring JWBS15-1138-332
Safety Precautions
Before using the JWBS-15 Lower Blade Guide Assembly, please ensure you have read and understood the safety precautions mentioned in the JWBS-15 Bandsaw user manual. Always wear appropriate personal protective equipment (PPE) such as safety goggles and gloves when operating the bandsaw.
Customer Support
https://jettools.com/jwbs-15-lower-blade-guide-assembly
FAQ’s
Can I use the JWBS-15 Lower Blade Guide Assembly with other bandsaw models?
No, the JWBS-15 Lower Blade Guide Assembly is specifically designed for use with the JWBS-15 Bandsaw. It may not be compatible with other bandsaw models.
Where can I find replacement parts for the JWBS-15 Lower Blade Guide Assembly?
You can find replacement parts for the JWBS-15 Lower Blade Guide Assembly on the official Jet Tools website or by contacting authorized Jet Tools dealers.
How often should I adjust the JWBS-15 Lower Blade Guide Assembly?
The frequency of adjustment may vary depending on usage. It is recommended to check and adjust the assembly whenever you notice a decrease in cutting accuracy or if the blade starts to drift.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>