ENFORCER SD-927PKC Wave Open Sensor Override Button Owner’s Manual
- June 16, 2024
- ENFORCER
Table of Contents
ENFORCER SD-927PKC Wave Open Sensor Override Button
Wave-to-Open Sensor
SD-927PKC-NEQ English, No-Touch
SD-927PKC-NEVQ English, No-Touch, Override Button
The ENFORCER Wave-to-Open Sensor uses IR technology to allow egress from a protected area or activate a device with just a wave of a hand. Since no touch is required, this sensor is suitable for use in hospitals, clinics, labs, clean rooms (to reduce the risk of contamination), schools, factories, or offices. The SD-927PKC-NEVQ adds a manual override button.
Features:
- Operating voltage, 12~24 VAC/VDC
- Range adjustable from 23 /8″~8″ (6~20 cm)
- Stainless steel single-gang faceplate
- 3A relay, adjustable from 0.5~30 sec, toggle, or as long as hand is near the sensor
- Quick connect scrawls terminal block
- LED illuminated sensor area for easy identification
- Selectable LED colors (turns from red to green or green to red when activated)
SD-927PKC-NEVQ
- Adds manual override button as a backup to the sensor
Specifications
| Model | SD-927PKC-NEQ | SD-927PKC-NEVQ |
|---|---|---|
| Operating voltage | 12~24 VAC/VDC | |
| Current draw (max.) | 120mA@12VDC | |
| Relay type | Form C dry contact NO/NC/COM, 3A@24VDC | |
| Override button | Switching capacity | N/A |
| Mechanical life | N/A | 500,000 Cycles |
| Response time | 10ms | |
| LEDS | Standby | Red† |
| Triggered | Green† | |
| Output time | Adjustable, 0.5~30sec., toggle, or as long as sensor is triggered | |
| Sensing range | Adjustable, 23 /8″~8″ (6-20 cm) | |
| Operating temperature | -4°~131° F (-20°~55° C) | |
| Dimensions | 2 3 /4″x41 /2″x11 /8″ (70x114x28 mm) | |
| Weight | 3-oz (85g) | 3.9-oz (110g) |
*French (SD-927PKC-NFQ, SD-927PKC-NFVQ) and Spanish (SD-927PKC-NSQ, SD-927PKC-NSVQ) faceplates also available. †Reversible by jumper
Dimensions
-
Front View
-
Side View
-
Back View
Ordering Information
Wave-to-Open Sensors
Model| SD-927PKC-NEQ| SD-927PKC-NFQ| SD-927PKC-NSQ| **SD-
927PWCQ*
Language| English| French| Spanish| English, French,
and Spanish Decals
Photo| 
| **| |
Wave-to-Open Sensors with Override Button
Model| SD-927PKC-NEVQ| SD-927PKC-NFVQ| SD-927PKC-NSVQ
Language| English| French| Spanish
Photo| 
| 
| 
Sensor Only
Model| CS-PD535-TAQ| CS-PD535-TBQ †| For our full line
of OEM/private label infrared sensors, contact SECO-LARM
Photo| |
Description| 11/4” (32mm) Sensor| 11/4” (32mm) Sensor
Customer Support
*For SD-927PWCQ specifications, visit www.seco-larm.com †Special order. Contact SECO-LARM for details
SECO-LARM® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Phone: 949-261-2999 |
800-662-0800 Fax:
949-261-7326
Website: www.seco-larm.com Email: sales
@seco-larm.com
Copyright © 2022 SECO-LARM U.S.A, Inc. All rights reserved.
All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective
owners.
The SECO-LARM policy is one of continual development. For that reason, SECO-
LARM reserves the right to Phone: change prices and specifications without
notice. SECO-LARM is not responsible for misprints SECO-LARM®
ENFURCEW®CRIMEBUSTER® CBA® SLI®A® .”‘ PI_SD-927PKC-NExQ_220902.docx
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>