VEVOR QJ8013A-60 Hanging Magnetic Sweeper Pickup Tool User Manual
- June 16, 2024
- VEVOR
Table of Contents
**VEVOR QJ8013A-60 Hanging Magnetic Sweeper Pickup Tool User Manual
**
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only misrepresentation of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation&maintenance. Every effort has been made to ensure the accuracy of this manual. These instructions are not meant to cover every possible condition and situation that may occur. We reserve the right to change this product at any time without prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE, DO NOT OPERATE THIS PRODUCT!
WARNING
KEEP AWAY FROMMATERIALS AND COMPONENTS THAT CAN BE DAMAGED BY EXPOSURE TO MAGNETS. INDIVIDUALS WITH PACEMAKER SHOULD CONSULT PHYSICIAN BEFORE USING THIS PRODUCT.
Model and Parameters
| Model | QJ8013A-60″ | QJ8013A-72″ | QJ8013A-84″ |
|---|---|---|---|
| Holds Up to | 93LBS | 105LBS | 120LBS |
| Working Width | 60inch | 72inch | 84inch |
| Quick Release Load Lever | support | support | support |
Assembly and Use
-
ALUMINIUM FRAME
-
SUPPORT HANDLE
-
BOLT
-
QUICK RELEASE HANDLE
-
BRUSH
-
Insert the forklift arm into the support handle ②and tighten the bolt③.
-
To release the material, position the Sweeper over a container. Pull upon the Release Handle ④.
Note: Please remove the protective film on the surface of the aluminum housing before use to avoid weakening the magnetic force.
OPERATION
Lift the release lever to quickly remove the magnetic force, allowing the adsorbed nails to fall off quickly, easily and conveniently. Avoid injury by removing sharp nails by hand.
Safety Instructions
WARNING:
- Please do not put it near flammable materials.
- DO NOT SIT, STAND ON THIS ITEM, It is forbidden to carry peop any condition.
- Overload is strictly prohibited.
- Don’t move too fast when passing potholes areas.
- This product is not a toy. Do not allow children to play with or near item.
- Do not lift while loaded.
- Use as intended only.
- Inspect before every use; do not use if parts are loose or damaged.
Assembly precautions
- Assemble only according to these instructions. Improper assembly create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gl during assembly.
- Keep assembly area clean and well lit.
- Do not assemble when tired or when under the influence of alcohol,drugs or medication.
- Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Sweeper.
SAVE THESE INSTRUCTIONS
Troubleshooting Instruction
| Problem | Reasons | Solution |
|---|---|---|
| The magnetic force drops for a while. | the fine iron powder that is adsorbed | |
| on the surface of aluminum frame | Remove the fine iron powder wich A brush |
Maintenance
- Avoid prolonged exposure to the sun to avoid aging.
- Avoid the cart from cracking due to violent impact when going uphill and downhill.
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai.
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122
Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
SHUNSHUN GmbH EC REP Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten, Germany
Pooledas Group Ltd Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom
MADE IN CHINA
NEED HELP? CONTACT US!
Have product questions?
Need technical support?
Pleasefeel freetocontact us:
Technical Support and E-Warranty Certificate www.vevor.com/support