SCT H030-1.0M Multi Camera Amplifier Installation Guide
- June 16, 2024
- SCT
Table of Contents
SCT H030-1.0M Multi Camera Amplifier
Product Information
Specifications
- Product Name : RC-SDA4+TM
- Model Number : RC-SDA4+TM
- Compatible Devices : Poly RPG300, RPG500, RPG700 & G7500
- Compatible Cable : RCC-H030-1.0M HDCI Y Cable to HDMI/DB9
- RS232 Controller : 3rd Party
- USB Cable: RCC-M003-1.0M USB 3.0 A to A
- SCTLinkTM Cable Power, Control, Audio & Video
- Power Supply: WPS-12 30VDC 100-240V 47-63Hz
- PC Requirements: PC Running Soft Codec
- CAT Cable Requirements: Integrator-Supplied CAT6 STP/UTP Cable (T568A or T568B)
- SCTLinkTM Cable Length: 10m-100m min/max Length
- RJ45 Pinout:
1. g
2. G
3. o
4. B
5. b
6. O
7. br
8. BR- Poly EagleEye IV Module Dimensions:
- RC4-CETM: H: 0.93 (23mm) x W: 2.5 (63mm) x D: 3.741 (95mm)
- RC-SDA4+TM: H: 1.28 (33mm) x W: 9.47 (241mm) x D: 4.88 (124mm)
Product Usage Instructions
Step 1: Connecting the Devices
- Connect the Poly RPG300, RPG500, RPG700, or G7500 to the RC-SDA4+TM using the RCC-H030-1.0M HDCI Y Cable to HDMI/DB9.
- Connect the RS232 Controller to the RC-SDA4+TM.
- Connect the PC to the RC-SDA4+TM using the RCC-M003-1.0M USB 3.0 A to A cable.
- Connect the SCTLinkTM cable to the RC-SDA4+TM, ensuring it is a single, point-to-point CAT cable with no couplers or interconnections.
- Connect the other end of the SCTLinkTM cable to the Poly EagleEye IV.
- Connect the Power Supply (WPS-12) to the RC-SDA4+TM.
Step 2: CAT Cable Setup
- Use an integrator-supplied CAT6 STP/UTP cable for the SCTLinkTM connection.
- Follow either the T568A or T568B pinout depending on your cable configuration.
- Ensure the length of the SCTLinkTM cable is within the specified range of 10m-100m.
Step 3: Powering On
- Make sure the PC is running the required soft codec.
- Connect the Power Supply (WPS-12) to a power source with the specified voltage and frequency range (100-240V 47-63Hz).
- Turn on the power supply to activate the RC-SDA4+TM.
FAQ
- Q1: What devices are compatible with the RC-SDA4+TM?
- A1: The RC-SDA4+TM is compatible with Poly RPG300, RPG500, RPG700, and G7500.
- Q2: How should I connect the SCTLinkTM cable?
- A2: The SCTLinkTM cable must always be a single, point-to-point CAT cable with no couplers or interconnections.
- Q3: What are the dimensions of the RC-SDA4+TM and Poly EagleEye IV modules?
- A3: The RC-SDA4+TM module has dimensions of H: 1.28 (33mm) x W: 9.47 (241mm) x D: 4.88 (124mm). The Poly EagleEye IV module has dimensions of H: 0.93 (23mm) x W: 2.5 (63mm) x D: 3.741 (95mm).
RC-SDA4+ Application Guide
Module Dimensions
- RC4-CE™: H: 0.93” (23mm) x W : 2.5” (63mm) x D : 3.741” (95mm)
- RC-SDA4+™ H: 1.28” (33mm) x W : 9.47” (241mm) x D : 4.88” (124mm)
Last Update: 01/05/2024
Read User Manual Online (PDF format)
Loading......