Esean GS-K6 Fan Controller Instructions
- June 16, 2024
- Esean
Table of Contents
Esean GS-K6 Fan Controller Instructions
Product Information
Specifications:
- Input: 120VAC/60Hz, 1.7A Max
- Output: Light: 120VAC/60Hz, 40W Max.
- Motor: 40W Max
Product Usage Instructions
Step-by-Step Wiring Instructions:
-
Step 1: Connect to AC Power:
Connect the black wire to the live wire, the white wire to the neutral wire, and the green wire to the ground wire of a 120V AC power source. -
Step 2: Connect Fan Motor:
Connect the fan motor according to the corresponding wire colors. Connect the white wire to the neutral wire and the blue wire to the live wire. -
Step 3: Connect Fan Light:
Connect the fan light by connecting the white wire to the neutral wire and the blue wire to the live wire.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.
FAQ
- Q: What is the input voltage and frequency for this product?
- A: The input voltage is 120VAC and the frequency is 60Hz.
- Q: What is the maximum current consumption of this product?
- A: The maximum current consumption is 1.7A.
- Q: What is the maximum power output for the light and the motor?
- A: The maximum power output for the light is 40W, and the maximum power output for the motor is also 40W.
Wiring diagram
- A : Connect to 120V AC power, the black wire to the live wire, the white wire to the neutral wire, and the green wire to the ground wire.
- B : Connect according to the corresponding colour of the fan motor
- C : Connect the fanlight, the white wire to the neutral wire, and the blue wire to the live wire.
Technical Parameters
- Input : 120VAC/60Hz, 1.7A Max.
- Output : Light: 120VAC/60Hz, 40W Max.
- Motor : 40W Max
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>