Gotron Electronic GQ3112 Rugged Phone User Manual

Gotron Electronic GQ3112 Rugged Phone

Specifications

• Function: Radio transmitter/receiver

• Operation Frequency:

  • BT(BR+EDR) BLE

  • WIFI: 802.11b/g/n (HT20, HT40)

  • Wi-Fi 5.2G: 802.11a/n20/n40/ac20/ac40/ac80

  • Wi-Fi 5.8G: 802.11a/n20/n40/ac20/ac40/ac80

  • GSM/GPRS/EGPRS 900

  • GSM/GPRS/EGPRS 1800

  • WCDMA B1, WCDMA B8

  • LTE FDD B1, LTE FDD B3, LTE FDD B7, LTE FDD B8, LTE FDD B20,
    LTE FDD B28

  • FM GPS

Product Usage Instructions

Safety Guidelines
It is important to follow these safety guidelines for the proper use of the device:

1. This device should not cause harmful interference.
2. The device must accept any interference received, including interference that may cause undesired operation.
3. Compliance with government standards for exposure to radio waves is ensured.

Installation and Setup
Follow these steps for proper installation and setup:

1. Refer to the user manual for detailed installation instructions.
2. Ensure the device is placed in an appropriate location with adequate ventilation.
3. Connect the device to a power source as per the provided instructions.

Troubleshooting Interference
If you experience interference with radio or television reception, follow these steps:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to a different circuit outlet than the receiver.
• Consult the dealer or a radio/TV technician for assistance.

IC Caution
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic DevelopmentCanada’s licence-exempt RSS(s). Operation is subject to specific conditions:

1. The device should not cause interference.
2. The device must accept any interference received.

Disclaimer

1. The usage if non-original accessories such as headsets chargers etc., will cause incompatibility between the mobile phone and the accessories  that may cause a degradation of performance and  malfunction, and we are not responsible for any damage that might occur.
2. Specifications and functions of your mobile phone can be different from those contained in this user manual as the user manual only contains general overview.
3. The specifications and functions of your mobile phone have been confirmed to work properly since produced from the factory. If there is  damage or defect due to the manufacturing not  by misusing, it would follow terms and conditions in the warranty card.
4. If the functions of your mobile phone are  related to features and services by carrier then those functions will follow the terms and conditions applicable by the carrier.
5. Please note that your mobile phone still has its limitations referring to the specifications and functions. These limitations cannot be considered as damage or defect or as manufacturer damage. Please use your mobile phone in accordance with the purposes and functions.
6. Any rugged phone damage caused by improper use including but not limited to improper sealing port covered or failure to follow the instructions is not covered by the warranty.

CE Warning

1. Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.

2. CAUTION:
   RISK OF EXPLOSION IF BATTERY IS REPLACED BYAN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDINGTO THE INSTRUCTIONS.

3. The product shall only be connected to a USB interface of version USB2.0.

4. Adapter shall be installed near the equipment and shall be easily accessible.

5. Operation temperature:-10~40C

6. The plug considered as disconnect device of adapter.

7. SAR: The device complies with RF specifications when the device used at 5mm from your body (SAR limit 2.0W/Kg), The device is in compliance with the requirements.

This information has to be presented in such a way that the user can readily understand it. Typically, this will necessitate translation into every local language (required by national consumer laws) of the markets where the equipment is intended to be sold. Illustrations,   pictograms and using international abbreviations for country names may help reduce the need for translation.

Restrictions in the 5 GHz band:
According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject  to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece  (EL), Spain(ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV),  Lithuania(LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL),  Austria(AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK),Finland (FI), Sweden (SE),   the United Kingdom (UK), Turkey (TR), Norway(NO), Switzerland (CH), Iceland (IS), and Liecht enstein (LI). The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5250 MHz  frequency range.

FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This Product meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is1.6 W/kg averaged over one gram of this Device GQ3112(FCC ID: 2AOWK-3112) has been tested against this SAR limit. SAR information on this can be viewed online at http://www.fcc.gov/oet/ea/fccid/.
Please use the device FCC ID number for search. This device was tested for typical operations 10mm from the body. To maintain compliance with FCC RF exposure requirements, 10mm separation distance should. maintained to the user’s bodies

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses  and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does  cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

IC Caution
This device contains licence-exempt transmitters)/receivers) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

SAR Statement:
Mobile Phone has been tested and meets applicable limits for radio frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. The SAR limit is 1.6 watts per kilogram in Canada that set the limit averaged over 1 gram of tissue. During testing, Mobile Phone (IC: 12564A-3112) radios are set to their highest transmission levels and placed in positions that simulate uses against the head, with no separation, and when worn or carried against the torso of the body, with 10mm separation. To reduce exposure to RF energy, use a hands-free option, such as the built-in speaker phone, the supplied headphones, or    other similar accessories. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified. Although this device has    been tested to determine SAR in each band of operation, not all band s are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range.

uletone  All Rights Reserved The information contained herein is subject to change without notice. The only warranties for Ulefone products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Ulefone shall not be liable for technical or editorial errors or omissions contained herein.

Shenzhen Gotron Electronic CO., LTD. Address: Floor 7, Building A, Block 1, Anhongji Tianyao Plaza, Longhua District, Shenzhen City, Guangdong Province China Service Center
Email: service@ulefone.com   

FAQ

Q: What should I do if I encounter interference with my radio or TV reception?
A: If interference occurs, try reorienting the antenna, increasing separation between devices, changing outlet connections, or seek professional help.

Q: Are there specific safety guidelines for using this device?
A: Yes, ensure the device does not cause harmful interference and complies with exposure standards for radio waves.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>