better bathrooms ARIMB021 Matt Black Bath Waste and Overflow User Manual
- June 16, 2024
- Better Bathrooms
Table of Contents
better bathrooms ARIMB021 Matt Black Bath Waste and Overflow
Product Information
Specifications
- Product: ARIMB021 – Matt Black Bath Waste and Overflow
- Product: ARIBB022 – Brushed Brass Bath Waste and Overflow
- Product: CHBAW001 – Chrome Bath Waste and Overflow
- Product: ARIMW007 – Matt White Bath Waste and Overflow
- Product: ARIVRG007 – Vapour Rose Gold Bath Waste and Overflow
Product Usage Instructions
Single-person assembly. We always recommend using professional tradespeople to install your product.
Congratulations on your purchase!
- Welcome to our growing gang of savvy shoppers. We’re on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings, and furniture to match. So, you can fall in love with your space every single day.
- As one of the UK’s largest independent bathroom stores, we’ve received countless awards; including the National Business Awards UK, the Digital Entrepreneur Awards, and being placed on The Sunday Times Fast Track 100.
- We hope your new product goes above and beyond your expectations. However, should any problems occur, please contact us via betterbathrooms.com/content/contact-us.
Important Information
Please read these instructions thoroughly and retain for future reference.
Parts / Diagrams Dimensions
| No | Part Description |
|---|---|
| 1 | Waste housing |
| 2 | Rubber washer |
| 3 | Flat rubber washer |
| 4 | Waste base |
| 5 | Spring core |
| 6 | Sealing ring |
| 7 | Drain cover |
| 8 | Decorative cover |
| 9 | Thread bolt |
| 10 | Fixing seat |
| 11 | Rubber seal |
| 12 | Overflow housing |
| 13 | Retaining nut |
| 14 | Hose |
| 15 | Rubber washer |
| 16 | Retaining nut |
Tools Required
- Screwdriver
Installation
- Fit the rubber seal (11) on the overflow housing (12), hold the unit in position from the backside of the bath.
- Screw in the thread bolt (9) through the fixing seat (10) and fasten with the overflow housing (12). Please ensure it is fully screwed at the body.
- Install the decorative cover (8) by inserting the plastic cores into the 2 holes on the fixing seat (10).
- Put the waste base assembled (4&5&7) and flat rubber washer (3) into the bottom waste hole of the bath. Place the rubber washer (2) and waste housing (1) onto the waste from the backside of the bath in sequence. Tighten all the above parts together.
- Check all the joints for leaks.
- To fill the bath, press down on the drain cover, press the cover again to empty the bath water.
Troubleshooting
Issues
Water leak
Check
- Is there damage to the rubber washer (2, 3, 15)?
- Is there damage to the sealing ring (6)?
- Is there damage to the rubber seal (11)?
- Is the retaining nut (13, 16) fully tightened?
- Has the drain cover (7) been screwed fully onto the spring core (5)?
Maintenance and Cleaning
To maintain the surface of your product, wipe with a clean damp cloth and
wipe dry. Do not use any abrasive cleaning agents or materials. If any harsh
chemicals come into contact with the surface of the product, rinse and wipe
clean immediately.
FAQ
-
Q: Can I install the product by myself?
A: We recommend using professional tradespeople to install the product for optimal results. -
Q: What should I do if there is a water leak?
A: Please check for damage to the rubber washer, sealing ring, rubber seal, and ensure that the retaining nut is fully tightened. Also, make sure the drain cover is screwed fully onto the spring core. -
Q: How should I clean and maintain the product?
A: Wipe the surface of the product with a clean damp cloth and wipe dry. Do not use any abrasive cleaning agents or materials. If any harsh chemicals come into contact with the surface, rinse and wipe clean immediately.
Thank you for choosing Better Bathrooms. Please read this manual before installing your product and keep for future reference.
Product
ARIMB021 – Matt Black Bath Waste and Overflow
ARIBB022 – Brushed Brass Bath Waste and Overflow
CHBAW001 – Chrome Bath Waste and Overflow
ARIMW007 – Matt White Bath Waste and Overflow
ARIVRG007 – Vapour Rose Gold Bath Waste and Overflow
- Single-person assembly
- We always recommend using professional tradespeople to install your product
Congratulations on your purchase
And welcome to our growing gang of savvy shoppers
We’re on a mission to bring you extraordinary bathroom products, for less.
From modern to traditional style ceramics, plus the gorgeous fixtures,
fittings and furniture to match. So, you can fall in love with your space
every single day.
As one of the UK’s largest independent bathroom stores, we’ve received
countless awards; including the National Business Awards UK, the Digital
Entrepreneur Awards and being placed on The Sunday Times Fast Track 100.
We hope your new product goes above and beyond your expectations. However,
should any problems occur, please:
- log in to your account and contact our customer services team via your self-serve portal – betterbathrooms.com/CustomerAccount/Login
- contact us via betterbathrooms.com/content/contact-us
Important information
Please read these instructions thoroughly and retain for future reference
Parts / Diagrams
| No| Part Description
---|---|---
1| Waste housing
2| Rubber washer
3| Flat rubber washer
4| Waste base
5| Spring core
6| Sealing ring
7| Drain cover
8| Decorative cover
9| Thread bolt
10| Fixing seat
11| Rubber seal
12| Overflow housing
13| Retaining nut
14| Hose
15| Rubber washer
16| Retaining nut
Dimensions
Tools required
Screwdriver
Installation
****|
- Fit the rubber seal(11) on the overflow housing(12), hold the unit in position from the backside of bath.
- Screw in the thread bolt(9) through the fixing seat(10) and fasten with the overflow housing(12). Please ensure it is fully screwed at the body.
- Install the decorative cover(8) by inserting the plastic cores into the 2 holes on fixing seat(10).
- Put the waste base assembled(4&5&7) and flat rubber washer(3) into the bottom waste hole of bath. Place the rubber washer(2) and waste housing(1) onto the waste from backside of bath in sequence. Tighten all the above parts together.
- Check all the joints for leaks.
---|---
| To fill the bath press down on the drain cover, press the cover
again to empty the bath water.
Troubleshooting
| Issues | Check |
|---|---|
| Water leak |
- Is there damage to the rubber washer(2,3,15)
- Is there damage to the sealing ring(6)
- Is there damage to the rubber seal(11)
- Is the retaining nut(13,16) fully tighten
- Has the drain cover(7) been screwed fully onto the spring core(5)
Maintenance and Cleaning
To maintain the surface of your product, wipe with a clean damp cloth and wipe
dry, do not use any abrasive cleaning agents or materials.
If any harsh chemicals come into contact with the surface of the product,
rinse and wipe clean immediately.
For more information
- visit betterbathrooms.com
- email customerservices@buyitdirect.co.uk
- call 03303903062
- write to Trident Business Park, Neptune Way, Huddersfield, HD2 1UA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>