milwaukee L4 PWL 4V Battery Swivel Head Torch Instruction Manual

Nothing but HEAVY DUTY:
L4 PWL
Original instructions

| Picture section with operating description and functional description| Text section with Technical Data, important Safety, and Working Hints and description of Symbols
---|---|---

L4 PWL 4V Battery Swivel Head Torch

TECHNICAL DATA

BATTERY-LAMP
L4 PWL
Rated Power ………………………………………..7,6 W
Lighting time with one fully charged battery
Flood Mode (high) …………………………………… .. 3 h
Flood Mode (low) …………………………………… 10 h
Spot Mode………………………………….. 10 h
Luminus fl UX both heads
Flood Mode (high) ……………………………………………….400 lm
Flood Mode (low) ………………………………… 100 lm
Spot Mode………………………………….. 500 lm
Charging time ……………………….. ≤ 120 min
Color rendering index (CRI)………………………………………..80
Color temperature………………………………………4000 K
Battery voltage………………………………………………4 V (DC)
USB-input …………………………………………..5 V DC; 0,1 A – 2,1 A
Weight …………………………………………………..230 g
Recommended ambient operating temperature ………………………………18…+50 °C
Recommended ambient charging temperature …………………………………+5…+40 °C
Recommended battery types……………………………….. L4B2
Recommended USB power supply…………………………………………CUBS
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fi re, and/or serious injury. Save all warnings and instructions for future reference.

SAFETY INSTRUCTIONS BATTERY-LAMP

Warning: Do not direct the light beam at persons or animals and do not stare into the light beam yourself (not even from a distance). Staring into the light beam may result in serious injury or vision loss.
Don‘t use this tool in wet areas.
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.

**** SAFETY INSTRUCTIONS BATTERY

Only use Milwaukee Type L4B2 rechargeable batteries.
Remove the battery pack before starting any work on the appliance.
Do not dispose of used battery packs in the household refuse or by burning them. Milwaukee
Distributors off er to retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects (short circuit risk).
Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact with the battery, acid washes it off immediately with soap and water. In case of eye contact rinse thoroughly for at least 10 minutes and immediately seek medical attention.
Warning! To reduce the risk of fi re, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack, or charger in fl uid or al-low
a fl uid to fl ow inside them. Corrosive or conductive fl aids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., Can cause a short circuit.

SPECIFIED CONDITIONS OF USE

The battery lamp is intended to be used light independent use away from the mains supply.
Do not use this product in any other way as stated for normal use.

CHARGING

Plug your USB cable into a power source such as an AC wall adaptor, computer or carport.
The indicator light will display the charging status:
Red solid: charging 0-79% charged
Green fl ashing: charging, 80-99% charged
Green solid: 100% charged
Red/Green fl ashing: damaged or faulty battery
If the light indicator fl ashes red and green alternating, check that the battery is fully seated into the bay. Remove the battery and reinsert. If the light continues to fl ash red and green, the battery may be extremely hot or cold, or wet. Allow the battery to cool down, warm up, or dry out and then reinsert. If the problem persists, contact a MILWAUKEE service facility.

FUEL GAUGE

When the battery is inserted or the device is turned on; the battery capacity is displayed for 3 seconds as follows:
Red fl ashing: < 3% remaining
Red solid: 3-10% remaining
Yellow solid: 11-49% remaining
Green solid: 50-100% remaining

BATTERIES

Battery packs that have not been used for some time should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum lifetime, the battery packs have to be fully charged, after use.
To obtain the longest possible battery life remove the battery pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and away from moisture
Store the battery packs in a 30% – 50% charged condition
Every six months of storage, charge the pack as normal.

TRANSPORTING LITHIUM BATTERIES

Lithium-ion batteries are subject to the Dangerous Goods Legislation requirements.
Transportation of those batteries has to be done in accordance with local, national, and international provisions and regulations.

• The user can transport the batteries by road without further requirements.

• Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations. Transport preparation and transport are exclusive to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.
  When transporting batteries:

• Ensure that battery contact terminals are protected and insulated to prevent short circuits.

• Ensure that the battery pack is secured against movement within the packaging.

• Do not transport batteries that are cracked or leak.
  Check with the forwarding company for further advice

MAINTENANCE

The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualifi ed person.
Use only Milwaukee accessories and spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the machine type printed as well as the six-digit No. on the label and order the drawing at your local service agents or directly at Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.

SYMBOLS

together with household waste material.
Electric tools and batteries that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
Check with your local authority or retailer for recycling advice and collection point.
****| European Conformity Mark
| British Conformity Mark
| Ukraine Conformity Mark
| European Conformity Mark

Copyright 2020
Techtronic Industries GmbH
Max-Eyth-Str. 10
71364 Winnenden
Germany
+49 (0) 7195-12-0
www.milwaukeetool.eu
Techtronic Industries (UK) Ltd
Fieldhouse Lane
Marlow Bucks SL7 1HZ UK
(10.20) 4931 4701 04

https://tm.by

References

• Milwaukee Tool Europe | Cordless Power Tools, Outdoor Tools, Hand Tools, PPE, Work wear. Storage and Accessories. | Milwaukee Tools Europe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>