tp-link Tapo D230S1 Smart Wire Free Video Doorbell User Manual

tp-link Tapo D230S1 Smart Wire Free Video Doorbell

Specifications

• Warranty: Lifetime
• Quality: Reliable
• Design: Robust
• Service: Whole-hearted

Product Information

1. Meet the Camera
   P1

2. Meet the Chime
   P2

3. Charge Your Doorbell
   P3

4. App Download
   P4

5. Set Up Doorbell
   P4

6. Pair with Your Chime (optional)
   P6

7. Install Your Doorbell
   P8

8. Troubleshooting
   P10

9. Echo Show Setting
   P11

Product Usage Instructions

1. Meet the Camera (P1)
   Instructions for meeting the camera go here.

2. Meet the Chime (P2)
   Instructions for meeting the chime go here.

3. Charge Your Doorbell (P3)
   Instructions for charging your doorbell go here.

4. App Download (P4)
   Instructions for downloading the app go here.

5. Set Up Doorbell (P4)
   Instructions for setting up the doorbell go here.

6. Pair with Your Chime (optional) (P6)
   Instructions for pairing the doorbell with the chime go here.

7. Install Your Doorbell (P8)
   Instructions for installing the doorbell go here.

8. Troubleshooting (P10)
   Instructions for troubleshooting common issues go here.

9. Echo Show Setting (P11)
   Instructions for setting up the Echo Show go here.

FAQ

How do I connect the doorbell to Echo Show?
Instructions for connecting the doorbell to Echo Show go here.

Ready to go! Now you can control your doorbell with your Echo Show. Try this voice command: Alexa, show the camera (doorbell J5)

Smart
Wire-free Video Doorbell

Note: Manual contents are subject to change without notice in accordance with our policy of continuous product improvement.

Warranty Service

Thank you for purchasing products from US.
We distinguish ourselves by an unrelenting commitment to excellence in terms of our reliable quality, robust design and whole-hearted service. All items you bought from US enjoy life-time warranty service.
Should you have any questions in using our products, please feel free to contact us . A reply email with solution will reach you within 24  hours.
advice and suggestions will be highly appr eciated and welcomed.

Meet the doorbell

Meet the chime

Charge your doorbell

Prior to the doorbell installation, please charge up your doorbell for about 8-10 hours till the charging LED turns BLUE from RED.

Compatible charger
USB compatible mobile phone charger (DC SV = 1A-2A).

App download
Search ‘Cloud Edge’ in the App stores or scan below QR codes to download the App.

Set up doorbell

D Press your doorbell to activate, and you will see the LED indicator flashes red (once per second). If not, press and hold reset button for 5 seconds to restore factory defaults.

1. Start setting up your doorbell following the in-app instructions.
2. Tips
   • Please operate the setup near your Wi-Fi router.
   • Make sure your phone is connecting to a 2.4GHz Wi-Fi.
   • Make sure the doorbell is turned on, and its indicator LED is flashing red. If not, press and hold RESET for 5 seconds.
   • Ensure the Wi-Fi signal is good, and the Wi-Fi password is correct.

Pair with your indoor chime

1. Long press the above button of Chime and the chime is on the pair status for 20 seconds and then red LED light flash
2. Press the doorbell button to send a pairing signal, and your chime will sound to react, together with its blue LED flashing. Chime pairing succeeds.
3. Chime settings.
   Long press:pair with doorbell
   Press & hold for 5 seconds to restore factory defaults.
   Short press:volume control
   Click to control volume: 5-speed volume

Ringtone selection.

Click to change ringtone (16 ringtones available).

Install Your doorbell

1. Select location for your doorbell.
   

2. Mount your doorbell.

   • Release the rear mount using the unlock pin.
   • Mark the screw holes V with the doorbell mount.
   • Mount the rear mount to  your wall with screws and tools.
   • Adhesive tapes are optional to mount the doorbell on flat surfaces.
   • Attach the doorbell to its rear mount, and push the doorbell to lock up.
   • All set! Press the doorbell button to run a test.

Trouble Shooting

• Ql: Is the video doorbell powered by battery?
  Al: Yes, there is a Li-ion battery built-in. Thanks to the low power consumption technology, a full charge lasts for more than 2 to 3 months in our lab test environment (Lab test condition: 10 events per day, 15 seconds video recording per event).

• Q2: Does it work with existing mechanical chime?
  A2: No. The doorbell comes with a battery powered wireless chime to notify people when your visitor presses the doorbell button. And our wireless chime is 100% wireless, you can place it almost everywhere you like. The transmission distance in open space is more than 100 meters (328 feet).

• Q3: How many wireless chimes can be added to the doorbell?
  A3: You can add several wireless chimes to work with your video doorbell. And one chime can be paired with upto 8 video doorbells.

• Q4: Does it support customized Motion Detection Zones.
  A4: Yes it does. You can customize the detection zone in the doorbell settings.

• Q5: Does the doorbell support cloud storage?
  A5: Your doorbell support local video storage by TF card . And you can also activate the cloud storage service in the App so as to back up video clips into the cloud server. There is a 7-day-free cloud recording trial service.

How do I connect the doorbell to Echo Show?

1. Add your doorbell to ‘CloudEdge’ App. Please install and set up your doorbell, following the user guide in the doorbell package.
2. Configure your Amazon Echo device.
3. Plug in your Echo. Plug the power adapter into your Echo Show and then into a power outlet. You must use the items included in the original Echo Show package for optimal performance. In about a minute, the display will turn on and Alexa will greet you.
4. Set up your Echo Show Follow the on-screen instructions to set up your Echo Show. During setup, you will connect your Echo Show to the Internet, so have your Wi-Fi password and Amazon login available.
5. Getting started with your Echo Show Interacting with your Echo Show
6. To power on and off your Echo Show, press and hold the Mic/Camera button.
7. A short press of the Mic/Camera button will turn off the microphones and camera and the LED will turn red.
8. Your Echo Show will automatically „turn on the screen when you walk in the room or say “Alexa.
9. To access Settings, swipe down from the top of the screen.
10. Alexa App Guide Download the free Amazon Alexa App to your phone or tablet. The Alexa App helps you get more out of your Echo Show. Link your Amazon accounts, and add skills to enable liveviewing your doorbell via your echo show.
11. Sign-in your Amazon account → More → Skills & Games → Search for “Cloudedge’
12. Enable the ‘Cloudedge’ skill → Link Account → Authorize to access.
13. Descover devices → Devices → Camera Radom S/N (default doorbell name) → Edit Name. for example: name it as “Doorbell J5”

Ready to go!

Now you can control your doorbell withyour Echo show.
Try this voice command: Alexa, show the camera (doorbell J5)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>