KOOSEED 973W Magnetic Portable Charger User Manual
- June 16, 2024
- KOOSEED
Table of Contents
KOOSEED 973W Magnetic Portable Charger
Product Parameters
- Name: POWER BANK
- Model: 973WP
- Material: PC + ABS
- Battery Capacity: 10000mAh
- Rated Capacity: 6000mAh (5V/1A)
- Lightning Input: 5V/2A
- Type-C Input: 5V/3A 9V/2A 12V/1.5A
- Type-C Output: 5V/3A 9V/2.3A 12V/1.7A
- Wireless Output: 5W/7.5W/10W/15W
- Wireless+ Type-C Output: 5V/2.5A
- Size: 1056721mm
- Weight: 210g
Notice Before Use
- Fully charge your power bank before first use. If you don’t use it for a long time, please recharge the power bank at least once every 3 months.
- Short press the power on button to check the power level. In the standby mode, it will automatically enter the hibernation state after one minute of resting.
- Avoid direct sunlight and high-temperature environment, the principle of fire and heat sources. Be careful not to use and store in an overheated, humid environment, and stop using it if it bulges.
- Avoid contact with corrosive substances.
- When children use the device, need to be guided by parents and follow the instructions to ensure the correct way to use the power bank. Dispose of battery according to local environmental law.
Product Features
-
Support wireless charging, just put your phone close to the power bank.
Please note : Your device must support the Qi function to use wireless. -
With an intelligent control circuit, it can realize overcharge/overload protection.
-
Two output ports, support 2 devices (1 Wired output, 1 Wireless output) charging at the same time.
-
It should be noted that magnetic charging is only applicable to iPhone 12 and above devices. Such as iPhone 12/13 Mini, iPhone 12/13/14, iPhone 12/13/14 Pro, iPhone 12/13/14 Pro Max.
Using Method
Short press the button on the left to turn on the power bank. If you need to use magnetic wireless charging, just put the mobile phone close to the lightning symbol and press the button.
Two charging methods: Wireless (magnetic) and Wired
Charging power bank using a computer or USB port
Wireless Charging
- Short press the button on the power bank.
- Put your Qi-compatible phone on the power bank. (The side of the lightning symbol).
- Remove your phone when fully charged. To check the remaining battery level, press the power button.
After Sales Service
Our after-sales email is support@kooseed.com.
If you encounter any product quality problems or operation problems you can consult us, we will give you a satisfactory answer within 24 hours.
FAQS
Does this device support pass-through charging? If I charge the power bank via wall charging, can I charge my phone at the same time as well?
Yes, you can charge your iPhone via wired or wireless charging while the battery pack is charging.
What if the power bank cannot be charged?
Please check if the cable is damaged. If the cable is not damaged, please check whether the input port is damaged. If you encounter the input port is damaged, or the power bank can not be turned on, please contact us, we provide 12 months of after-sales service.
What models of cell phones can use the magnetic charging function of this power bank?
iPhone 14/ iPhone 14 Pro / iPhone 14 Pro Max / 14 plus, iPhone 13 / iPhone 13 Pro / iPhone 13 Pro Max / 13 mini, iPhone 12 / iPhone 12 Pro / iPhone 12 Pro Max / 12 mini (Without case or with magnetic mobile phone case).
What models of cell phones can use the wireless charging function of this power bank?
All phones that support Ql wireless charging function can use it, such as iPhone 8 or above models, as well as Huawei and Samsungphones. (For example iPhone 8, iPhone 8+, iPhone X, iPhone Xs, iPhone XR, iPhone XsMax, iPhone 11/12/13, Samsung s9, Samsung 59+, Samsung note, Samsung so, Samsung sot, Samsung s10, Samsung s10+, Xiaomi 6, Xiaomi 8, Xiaomi 9, Xiaomi mix2, Xiaomi mix3, etc.)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>