evolution R11 VAC-Li 18V Li-Ion EXT Cordless Wet & Dry Vacuum Instruction Manual

evolution R11 VAC-Li 18V Li-Ion EXT Cordless Wet & Dry Vacuum

This Instruction Manual was originally written in English.
IMPORTANT
Please read these operating and safety instructions carefully and completely. For your own safety, if you are uncertain about any aspect of using this equipment please access the relevant Technical Helpline, the number of which can be found on the Evolution Power Tools website. We operate several Helplines throughout our worldwide organisation, but Technical help is also available from your supplier. WEB: www.evolutionpowertools.com

GUARANTEE

Congratulations on your purchase of an Evolution Power Tools Machine. Please complete your product registration ‘online’ as explained in the A4 online guarantee registration leaflet included with this machine. You can also scan the QR code found on the A4 leaflet with a Smart Phone. This will enable you to validate your machine’s guarantee period via Evolutions website by entering your details and thus ensure prompt service if ever needed. We sincerely thank you for selecting a product from Evolution Power Tools. Evolution Power Tools reserves the right to make improvements and modifications to the product design without prior notice. Please refer to the guarantee registration leaflet and/or the packaging for details of the terms and conditions of the guarantee. Evolution Power Tools will, within the guarantee period, and from the original date of purchase, repair or replace any goods found to be defective in materials or workmanship. This guarantee is void if the machine being returned has been used beyond the recommendations in the Instruction Manual or if the machine has been damaged by accident, neglect, or improper service.

This guarantee does not apply to machines and / or components which have been altered, changed, or modified in any way, or subjected to use beyond recommended capacities and specifications. Electrical components are subject to respective manufacturers’ warranties. All goods returned defective shall be returned prepaid freight to Evolution Power Tools. Evolution Power Tools reserves the right to optionally repair or replace it with the same or equivalent item. There is no warranty – written or verbal – for consumable accessories such as (following list not exhaustive) blades, cutters, drills, chisels or paddles etc. In no event shall Evolution Power Tools be liable for loss or damage resulting directly or indirectly from the use of our merchandise or from any other cause. Evolution Power Tools is not liable for any costs incurred on such goods or consequential damages. No officer, employee or agent of Evolution Power Tools is authorised to make oral representations of fitness or to waive any of the foregoing terms of sale and none shall be binding on Evolution Power Tools. Questions relating to this limited guarantee should be directed to the company’s head office, or call the appropriate Helpline number.

WARNING: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

MACHINE SPECIFICATIONS

x 12-3/16”
Airflow| 45 CFM

LABELS & SYMBOLS

WARNING: Do not operate this machine if warning and/or instruction labels are missing or damaged. Contact Evolution Power Tools for replacement labels.

Note: All or some of the following symbols may appear in the manual or on the product.

OUTDOOR USE

WARNING: For your protection if this tool is to be used outdoors it should not be exposed to rain, or used in damp locations. Do not place the tool on damp surfaces. Use a clean, dry workbench if available. For added protection use a residual current device (R.C.D.) that will interrupt the supply if the leakage current to earth exceeds 30mA for 30ms. Always check the operation of the residual current device (R.C.D.) before using the machine. If an extension cable is required it must be a suitable type for use outdoors and so labelled. The manufacturers instructions should be followed when using an extension cable.

SAFETY INFORMATION

IMPORTANT SAFETY INSTRUCTIONS & GROUNDING INSTRUCTIONS
When using an electrical appliance, basic precautions should be always followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.

NOTE: Read all safety rules carefully before attempting to operate. Retain for future reference.

WARNING: Never operate this unit when flammable materials or vapors are present because electrical devices produce arcs or sparks that can cause a fire or explosion.
NEVER LEAVE OPERATING VACUUM UNATTENDED!

NOTE: This appliance is intended for household use.

WARNING: To reduce the risk of fire, electric shock, or injury:

• Remove the battery when not in use and before servicing.

• Do not expose to rain. Store indoors.

• Always remove the battery from the machine before removing the tank cover.

• Do not allow to be used as a toy. Close attention is necessary when used by or near children.

• Do not put any object into openings. Do not use with any openings blocked; keep the openings free of dust, lint, hair and anything that may reduce airflow.

• Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts.

• Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.

• Do not use without dust bag and/or filters in place.

• Turn off all controls before removing the battery.

• Use extra care when cleaning on stairs.

• Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present.

• Do not use your cleaner as a sprayer
  of flammable liquids such as oil-based paint, lacquers, etc.

• Do not vacuum toxic, carcinogenic, combustible or other hazardous materials such as asbestos, arsenic, barium, beryllium, lead, pesticides or other health endangering materials.

• Do not pick up soot, cement, plaster or drywall dust without filter and dust bag in place. These are very fine particles that may affect the performance of the motor or be exhausted back into the air. Additional dust bags are available.

• Use special care when emptying heavily loaded tanks.

• To avoid spontaneous combustion, empty tank after each use.

• The operation of a utility vacuum can result in foreign objects being blown into eyes, which can result in eye damage. Always wear safety goggles when operating vacuum.

• Remove the battery before connecting the hose, nozzles, filters, or other accessories.

• Exhausted batteries are to be removed from the appliance and safely disposed of.

• If the appliance is to be stored and unused for a long period, the batteries should be removed

• Prevent unintentional starting. Ensure the power switch is in the off-position before connecting to battery pack, picking up or carrying the appliance. Carrying the appliance with your finger on the power switch or energising the appliance that has the power switch on invites accidents.

• Make sure the power switch is off and the battery pack is removed before clearing jammed material, making adjustments, changing accessories, storing or servicing the appliance. Unexpected actuation of the appliance while clearing jammed material or servicing may result in serious personal injury.

• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

• Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

• When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

• Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.

• Do not expose a battery pack
  or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion. The temperature of 130°C can be replaced by the temperature of 265°F.

• Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.

• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.

• Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care.

GETTING STARTED – UNPACKING

Caution: This packaging contains sharp objects. Take care when unpacking. Remove the machine, together with the accessories supplied, from the packaging. Check carefully to ensure that the machine is in good condition and account for all the accessories listed in this manual. Also make sure that all the accessories are complete. If any parts are found to be missing, the machine and its accessories should be returned together in their original packaging to the retailer. Do not throw the packaging away; keep it safe throughout the guarantee period. Dispose of the packaging in an environmentally responsible manner. Recycle if possible. Do not let children play with empty plastic bags due to the risk of suffocation.

ITEMS SUPPLIED

DESCRIPTION

| 099-0001,

099-0004,

| 099-0001A,

099-0001B,

099-0001C

099-0004A

---|---|---
Instruction Manual|  |
Flexible hose|  |
Crevice nozzle|  |
Gulper nozzle|  |
Round brush|  |
Cartridge filter|  |
Foam filter|  |
2Ah Battery|  |
4Ah Battery|  |
5Ah Battery|  |
8Ah Battery|  |
Single dock charger|  |
Double dock charger|  |

ADDITIONAL ACCESSORIES

In addition to the standard items supplied with this machine the following accessories are also available from the Evolution online shop at www.evolutionpowertools.com or from your local retailer.

RECOMMENDED BATTERIES/CHARGERS

R18RCH-Li2 –

Double dock charger

| R18RCH-Li2, R20RCH-Li2| ****

EMC18-Li

If you intend to store a battery for a period without use then store battery at room temperature (0°C to 20°C) When storing for very long periods boost charge the battery once per year to prevent over discharge. The Ambient temperature range for tool and battery use: 0°C to 40°C. The charging temperature: 5°C to 40°C.

MACHINE OVERVIEW R11VAC-Li

1. HANDLE
2. ON/OFF SWITCH
3. LID LATCH
4. VACUUM PORT
5. DUST TANK
6. BLOWING PORT
7. FLEXIBLE HOSE
8. ROUND BRUSH
9. GULPER NOZZLE
10. CARTRIDGE FILTER
11. CREVICE NOZZLE
12. FOAM FILTER (WET)

ASSEMBLY

To install/remove the battery
To install the battery insert firmly into the tool until you hear an audible click, ensuring the battery is fully seated and latched into position. To remove the battery depress the battery release button and pull the battery out of the tool.

Attaching the vacuum hose
Before using the vacuum the flexible hose will need to be attached

• Ensure the vacuum is placed on a flat, firm surface.
• Unlatch tank latches and remove power head from the tank.
• Remove the hose from the tank.
• Align the latching end of the hose with the intake or blower port on the appliance, ensuring the alignment lock is correctly orientated to fit into the port.
• Insert the hose end into the port until you hear an audible click. Gently pull the hose end to ensure it is correctly secured.
• Replace power head onto the tank and secure latches.

Note: The power head will only fit onto the tank when the intake port on the front of the power head and the storage area for the wide nozzle tool on the tank are aligned.

Note: To reduce the risk of injury always hold securely with one hand on the main handle. (1)

OPERATING INSTRUCTIONS

WARNING: To reduce the risk of fire or explosion, do not operate this vac in areas with flammable gases, vapors or explosive dust in the air. Flammable gases or vapors include but are not limited to: lighter fluid, solvent-type cleaners, oil-based paints, gasoline, alcohol or aerosol sprays. Explosive dusts include but are not limited to: coal, magnesium, aluminium, and grain or gun powder. Do not vacuum explosive dust, flammable or combustible liquids or hot ashes. Do not use this vac as a sprayer for any flammable or combustible liquid. To reduce the risk of health hazards from vapors or dusts, do not vacuum toxic materials.

CAUTION: To reduce risk of hearing damage, wear ear protectors when using the vac for extended hours or when using it in a noisy area. This 11L wet/dry vac is assembled at the factory and ready for use when you remove it from the packaging. The unit is ready for dry vacuuming or blowing

ON/OFF
After you insert the battery into the machine, turn the unit “ON” by pushing the switch from position “O” to position “I”. The “O” is the “OFF” position and the “I” is the “ON” position

DRY PICK UP

NOTE: If foam filter is in position over filter cage, it must be removed before installing cartridge filter. The cartridge filter can be used for wet or dry pick up; installation is the same for both. When picking up large quantities of liquid please refer to the wet pick up operation section in this manual. Use the cartridge filter in position over the filter cage for most general dry material pick up.

• With the power head in an upside down position, slide the cartridge filter down over the filter cage, push the filter seals against the power head.
• Place filter retainer into the top of the cartridge filter, hold the power head with one hand, turn the handle on the filter retainer clockwise to tighten, locking the filter into place.
• To remove the cartridge filter for cleaning, again hold the power head and turn the filter retainer counter-clockwise to loosen and remove, slide the cartridge filter off the filter cage.
• To clean the cartridge filter shake or brush off excess dirt or rinse (from the inside of the filter) with water, dry completely (approximately 24 hours) and re-install.

WET PICK UP

• Remove cartridge filter and replace it with foam filter when you do wet pickups.
• This wet/dry vac is equipped with a float mechanism which will rise automatically to cut off the airflow when the liquid in the tank reaches a predetermined level. When this happens, turn off the vac, remove the battery, and empty the dust tank. You will know that the float has shut the airflow off because the suction ceases and the motor noise becomes higher in pitch due to increased motor speed. The liquid capacity may vary with the rate of pickup.

EMPTYING THE TANK

WARNING: To reduce the risk of injury from accidental starting, remove the battery before emptying the dust tank.

• Remove the power head assembly of the wet/dry vac by pulling outward on the lid clips located on each side of the vac. Lift off the power head assembly. (Fig. 4)
• Dump the tank contents into the proper waste disposal container.

BLOWING OPERATION

WARNING: To reduce the risk of injury from accidental starting, remove the battery before changing. To avoid injury to bystanders, keep them clear of blowing debris.

CAUTION: Wear a dust mask if blowing creates dust which might be inhaled. To reduce the risk of hearing damage, wear ear protectors when using the vac/blower for extended hours or when using it in a noisy area. Your vac contains a blowing feature. It has the capability to blow sawdust and other debris. It can be used to blow dust and debris out of garages or off patios and driveways. Follow the steps below to use your vac as a blower.

• Locate blowing port on your vac.
• Insert one end of the hose into the blowing port.
• Turn vac “ON”.

FILTER REPLACEMENT

WARNING: To reduce the risk of injury from accidental starting, remove the battery from the machine before changing or cleaning filter. Your filter should be cleaned often to maintain peak vacuum performance.

NOTE: To avoid damage to the fan and motor, always reinstall the reusable dry filter before using the vacuum for dry pickups and always reinstall the foam filter before using the vacuum for wet pickups.

NOTE: After cleaning, check the filter for
tears or small holes. Do not use a filter with holes or tears in it. Even a small hole can cause dust to come out of your vacuum. Replace it immediately.

NOTE: Before installing the filter on the vacuum, clean the area of the lid so that the clamp ring will seal the bag against the lid and stop small particles from bypassing the filter bag. If the filter is clean and not damaged, replace it on the filter cage. If it cannot be reused, place a new filter over the filter cage.

NOTE: Clean the filter in an open area.

WARNING: Do not remove filter cage and float. The float prevents water from entering the impeller and damaging the motor. The cage prevents fingers from touching the moving impeller.

MAINTENANCE

WARNING: Any maintenance must be carried out with the machine switched off and the battery removed.

CLEANING
To keep your wet/dry vacuum looking its best, clean the outside with a cloth dampened with warm water and mild soap. To clean the tank:

• Empty the tank.
• Wash tank thoroughly with warm water and mild soap.
• Wipe out with dry cloth.

STORAGE

Before storing your vacuum, the dust tank should be emptied and cleaned. The accessories should be kept in the accessory holder so they can be readily available. The vacuum should be stored indoors.

ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. Environmental damage through incorrect disposal of the batteries / rechargeable batteries. Batteries /rechargeable batteries may not be disposed of with the usual domestic waste. They may contain toxic heavy metals and are subject to hazardous waste treatment rules and regulations. Please dispose of batteries according to the relevant local requirements. Remove the battery from the product before disposal.

TROUBLESHOOTING

Vacuum can not run

| ****

1.  Battery not installed properly.

2.  Battery not charged.

3.  Internal components too hot.

| ****

1. Check battery installation.

2.  Check battery charging requirements.

3.  Allow tool to cool down.

Loss of suction, wet pick-up

| 1. Full tank

2.  Clogged hose

3.  Clogged filter

| 1. Drain and clean tank

2.  Remove hose and clean debris

3.  Clean or replace filter

Loss of suction, dry pick-up

| 1. Full tank

2.  Clogged hose

3.  Clogged filter

| 1. Empty and clean tank

2.  Remove hose and clean debris

3.  Clean or replace filter

WARNING: To reduce the risk of injury from moving parts and/or electrical shock, remove battery from the machine before performing troubleshooting checks. Minor problems often can be fixed without calling customer service.

DECLARATION OF CONFORMITY

The manufacturer of the product covered by this Declaration is: UK: Evolution Power Tools Ltd. Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR. FR: Evolution Power Tools SAS. 61 Avenue Lafontaine, 33560, Carbon-Blanc, Bordeaux, France. The manufacturer hereby declares that the machine as detailed in this declaration fulfils all the relevant provisions of the Machinery Directive and other appropriate directives as detailed below. The manufacture further declares that the machine as detailed in this declaration, where applicable, fulfils the relevant provisions of the Essential Health and Safety requirements. The Directives covered by this Declaration are as detailed below:

• 2006/42/EC. Machinery Directive.
• 2014/30/EU. Electromagnetic Compatibility Directive.
• The Restriction of the Use of certain Hazardous Substances in Electrical Equipment (RoHS) Directive.
• 2002/96/EC. as amended by 2003/108/EC The Waste Electrical and Electronic Equipment (WEEE) Directive.

And is in conformity with the applicable requirements of the following documents

• IEC 60335-2-2: 2019(Seventh Edition)
•  IEC 60335-1:2010(Fifth Edition) (incl. Corrigendum 1:2010 and Corrigendum 2:2011)+ AMD1:2013, COR1:2014, AMD2:2016, COR1:2016
• EN 60335- 2-2:2010+A11:2012+A1:2013
• EN 60335-1:2012+A11:2014+AC:2014+A13:2017+A1:2019+
• A14:2019+A2:2019
• EN 55014-1:2017/A11:2020
• EN 55014-2:2015

Product Details

• Description: Evolution R11VAC-Li 11L Cordless Wet and Dry Vacuum Cleaner
• Product Number: 099-0001
• Brand Name: Evolution Build
• Voltage: DC 18V

The technical documentation required to demonstrate that the product meets the requirements of directive has been compiled and is available for inspection by the relevant enforcement authorities, and verifies that our technical file contains the documents listed above and that they are the correct standards for the product as detailed above. UK: Evolution Power Tools Ltd. Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR. FR: Evolution Power Tools SAS. 61 Avenue Lafontaine, 33560, Carbon-Blanc, Bordeaux, France

References

• Evolution Power Tools
• Evolution Power Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>