KOOSEED MP969WP Power Bank User Manual
- June 5, 2024
- KOOSEED
Table of Contents
KOOSEED MP969WP Power Bank User Manual
Product parameters
- Name: Power Bank
- Model: MP969WP
- Material: PC + ABS
- Battery capacity: 10000mAh (37Wh)
- Rated capacity: 6300mAh(5V/1A)
- Micro line output: 5V-2.1A
- Wireless output: 5W/7.5W/10W/15W
- USB + Type-C line + Micro line Total output: 5V-3A
- USB + Type-C line + Micro line + Wireless Total output: 5V-2.5A
- Lightning input: 5V-2A
- Type-C input: 5V-3A, 9V-2A, 12V-1.5A
- USB output: 5V-3A, 9V-2A, 12V-1.5A
- Type-C line input: 5V-3A, 9V-2A, 12V-1.5A
- Type-C line output: 5V-3A, 9V-2.3A, 12V-1.7A
- Size: 1366719mm
- Weight: 220g
Cautions
- Avoid direct sunlight and high temperature environment.
- Avoid contact with corrosive substances. If the power bank is left for a long time (more than 3 months), the power bank needs to be kept at 50% power.
- When children use the device, need to be guided by parents and follow the instructions to ensure the correct way to use the power bank.
- Recommended ambient temperature: operating temperature 0°C – 45°C storage temperature -20°C – 60°C.
Notice before use
- In order In protect the life of the batter y, pl ease use the power bank at l east once every 3 months.
- Be careful not to use and store in an over heated, humid environment, and stop using i t if i t bulges.
- Short press the power on button to check the power level. In the standby mode, it will automatically enter the hibernation state after one minute of resting.
Product Features
- Support wireless charging, just put your phone close top the mobile power. “
- Please note: Your device must have QI Certified to use wireless charging.
- With intelligent control circuit, it can realize overcharge protection and overload protection.
- It supports PD 3.0 fast charging mode. Maximum output up to 20W.
- Two-way output and input Type-C line , support 4 devices (3 Wired outputs, 1 Wireless) charging at the same time.
- Please pay attention! Magnetic charging is only available for iPhone 13 / 13 Pro / 13 Pro Max / 13 Mini / 12 / 12 Pro / 12 Pro Max / 12 Mini.
Product Features
- USB Output port
- Type-C Input port
- Lightning input port
- ON/OFF
- Power display
- Wireless magnetic charging
Using method
Use the USB cable to connect the phone and the mobile power to start charging. If you need to use wireless charging, just put the back of the phone close to the raised area of the power bank, and turn on the switch on the right side.
-
Charge your phone and cable
-
Charging power bank via a computer or USB port
FAQs
-
Does this device support pass-through charging? If I charge the power bank via wall charging, can I charge my phone at the same time as well?
Yes, you can charge your iPhone via wired or wireless charging while the battery pack is charging. -
What if the power bank cannot be charged?
-
Please check if the cable is damaged.
-
If the cable is not damaged, please check whether the input port is damaged.
-
If you encounter the input port is damaged, or the power bank can not be turned on, please contact us, we provide 12 months of after-sales service.
-
What models of cell phones can use the wireless charging function of this power bank?
All phones that support QI wireless charging function can use it, such as iphone 8 or above models, as well as Huawei and Samsung phones. (For example: iPhone 8, iPhone 8+ , iPhone X, iPhone Xs, iPhone Xr, iPhone XsMax, iPhone 11, iPhone 12, Samsung s9, Samsung s9+, Samsung note9, Samsung s8, Samsung s8+, Samsung s10, Samsung s10+, Xiaomi 6, Xiaomi 8, Xiaomi 9, Xiaomi mix2, Xiaomi mix3, etc.)
After Sales Service
Our after-sales email is: support@kooseed.com If you have any questions about product quality or operation, please contact us at any time. We will reply and solve your question within 24 hours.
FCC Information to User
This equipment has bee n tested and found to comply With the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio Communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following
measures:
- Re orient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/T V technician for help.
Caution
Modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.
FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RR Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
IMPORTANT NOTE:
FCC RR Radiation Exposure Statement:
This equipment complies with FCC RR radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RR exposure requirement. The device can be used in portable exposure condition without restriction. This transmitter must not be co-located or ope rating in conjunction with any other antenna or transmitter.