LG TONE-UFP9 TONE Free Earbuds UV Charging Case Owner’s Manual
- June 7, 2024
- LG
Table of Contents
TONE-UFP9 TONE Free Earbuds UV Charging Case
OWNER’S MANUAL
Bluetooth® LG Stereo Headset
NOTE: For the best performance and to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset. Any modifications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 GBR
TONE-UFP9
Google Play
App Store
TONE-UFP9W
www.lg.com
TONE-UFP9E Copyright © 2021 LG Electronics Inc. All Rights Reserved
5. Mobile Calling Functions
Function
Status
Answering Calls Ringing
Ending Calls Talking
Making Calls Idle
Receiving Calls while on the Talking Phone
Rejecting Calls Ringing
Description Touch the left or right earbud once.
Touch the left or right earbud twice.
If you make a call using a mobile phone, the call is automatically connected
to the headset. If you touch the left or right earbud once, the current call
will go on hold, and you will be able to answer an incoming call. If the
previous call is on hold, you can finish the current call on the mobile phone.
(It works differently depending on the mobile phone settings.) Touch and hold
the left or right earbud.
8
Extra Ear Gels USB Type CTM USB C to AUX
(small & large) Charging Cable
cable
LG TONE FreeTM Earbuds
UV Charging Case
Owner’s Manual
NOTE: Actual product design may differ from images shown in manual. *A mid-
sized ear gel is attached to the earbud by default.
! CAUTION Make sure authentic LG Electronics components are used. Using a
nonauthentic component may damage the product and thus void the warranty. Use
the USB Type CTM cable/USB C to AUX cable provided with the product.
1
1. Overview
[Charging Case]
Charging port UVnano LED
Plug and Wireless Mode Switch
Mood light (When you open the charging case, the mood light turns on and off.)
UVnano LED Charging terminals
Battery Status Indicator (up)
UVnano Indicator (down)
2
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
[Listen to the Ambient Sound (LAS)] The Listen to the Ambient Sound (LAS) function allows you to listen to the ambient sound so that you can recognize the surrounding situation and any potential risks. [Active Noise Cancellation (ANC)]
Touch and hold the left or right earbud to switch between the ANC mode and the
LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app. You can
configure the Listen to the Ambient Sound mode and Conversation mode using the
LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the
time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or
being on the phone.
*ANC is an acronym for Active Noise Cancellation.
! CAUTION: When the LAS mode is enabled, you may hear the ambient sound become
loud suddenly. When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
The Active Noise Cancellation (ANC) function blocks any ambient sound. So, you can use the function to listen to the music or watch a video without interference.
9
10
[Earbuds] Speaker mesh (Microphone)
Touchpad Charging terminals
Microphone
Speaker mesh (Microphone)
Touchpad Charging terminals
Microphone
Make sure that the charging terminal is not soiled with foreign substance. The appearance and specifications of the actual product may differ depending on the model.
3
7. UVnano
The charging case has a built-in UVnano LED, which allows you to use your
earbuds cleanly. If you charge the earbuds wired after mounting them on the
charging case and closing the cover, the UVnano LED operates for 5 minutes.
*UVnano is a compound word derived from the words UV and its unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on. The
UVnano charging case eliminates up to 99.9% of harmful bacteria inside the
earbud hole. In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product function.
! CAUTION: Be aware that the temperature of the earbuds may rise while the
UVnano LED is on.
11
2. How to pair
-(
-(
MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-( -(50/&’1
-(
-( #MVFUPPUI
-(
-(50/&’1
4
8. Charging
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time. The
charging port on the charging case cannot be used to supply power to mobile
phones, etc.
12
When the Fast Pair connection pop-up appears on the top area of the mobile
phone screen, tap it to connect. (It only supports AndroidTM 6.0 or higher,
and requires configuring Bluetooth and location information settings of the
mobile device.)
If the pop-up does not appear, select [LG-TONE-FP9] from the Bluetooth menu on
the mobile phone and connect it (for users of iOS or Android 5.0 or lower
versions).
! CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP9_LE is not
the correct model name for connection. Check the model name in use and connect
with the model name without “LE”. If the earbud model name is abnormally
displayed on the Android device, change the model name in the Bluetooth menu
of Connected Device Settings.
NOTE: To connect with another device, perform the above procedure again.
Bluetooth name of the product is “LG-TONE-FP9”.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
5
3. Wearing Earbuds
Separate the earbuds from the charging case and adjust them so that they fit
comfortably in your ears. NOTE: You can use ear gels that fit your ears to
improve Active Noise Canceling (ANC) performance and enjoy rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
6
9. Plug and Wireless Mode (External Device Connection Mode)
You can connect the charging case to a device such as an airplane stereo
system, treadmill, cassette player, radio, and TV to listen with the earbuds.
1 Push the Plug and Wireless Mode switch on the charging case to the right to
activate the Plug and Wireless Mode. The battery status indicator flashes in
green.
2 Open the cover of the charging case to connect the charging case to the
earbuds. Once the connection is established, the battery status indicator
turns on in green for 3 seconds and turns off.
3 Connect the USB Type CTM side of the USB C to AUX cable to the charging
case. (The USB C to AUX cable does not support the charging function.)
4 Connect the AUX side of the USB C to AUX cable to a device that you want.
NOTE: Deactivate the Plug and Wireless Mode to reconnect the earbuds
to the Bluetooth device that was previously connected.
If the Plug and Wireless Mode is turned on, the earbuds and the LG TONE Free
app are disconnected.
The Plug and Wireless mode does not support the call function.
The Plug and Wireless mode may not be compatible with some devices.
In airplane models in which the AUX terminal is divided into left and
right channels, an adapter (separately sold) may be necessary.
If you use the Plug and Wireless mode for a long duration, the battery
of the earbuds (including the charging case) may drain faster than
when physically connected to a smartphone.
13
14
4. Playing Music
-(
Function
Description
Play / Pause
: Touch the left or right earbud once.
Adjusting the Volume
: Touch the left(Decrease volume) or right(Increase volume) earbud twice.
Play Next
: Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
7
10. Checking the Battery Status
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the UVnano
process will commence for 5 minutes. Once this process is complete, the
charging case’s battery status will be displayed.
Battery Status Indicator
Red
Yellow
Green
Remaining Battery (charger not connected)
20% or lower
20% – 80%
80% or higher
Charging State (charger connected)
Charging
–
Fully charged
NOTE: When the charging case lid is closed, charging case battery status is displayed. If the charging case has no remaining charge, there will be no display and it cannot function. We recommend you keep the charging case charged at all times as the earbuds are not able to be turned on and turned off independently.
15
The LG TONE Free (TONE-UFP9) is a lightweight wireless headset that uses
Bluetooth technology. This product can be used as an audio accessory for
devices supporting either the A2DP or Hands-Free Bluetooth Profile.
Safety Precautions
The following safety precautions are provided to prevent any unexpected
accident or damage. Please familiarise yourself with the safety precautions.
The safety precautions are classified into “WARNING” and “CAUTION”.
! WARNING: Failing to comply with the instructions may result in serious
injury or death.
! CAUTION: Failing to comply with the instructions may result in minor injury
or product damage.
! WARNING
Do not drop the product from a high place. Make sure there is no water,
alcohol, or benzene in contact with the product. Do not store the product in a
wet or dusty place. Do not place heavy objects on the product. This product is
waterproof to the IPX4 level (daily life waterproof). (The IPX4 waterproof
rating applies to the earbud product only.) Do not put the product under the
water or use it in a humid location such as a bathroom.
16
Additional Information
1. Radio frequency exposure
This Bluetooth LG Stereo Headset is a radio transmitter and receiver. When in
operation it communicates with a Bluetooth equipped mobile device by receiving
and transmitting radio frequency (RF) electromagnetic fields (microwaves) in
the frequency range 2402 to 2480 MHz. Your Bluetooth headset is designed to
operate in compliance with the RF exposure guidelines and limits set by
national authorities and international health agencies when used with any
compatible LG Electronics mobile phone.
2. Bluetooth Connection Precautions
The following environments affect the range and reception of Bluetooth
signals: – When walls, metal, human bodies, or other obstacles exist between
the
Bluetooth device and the connected device – When equipment that uses 2.4 GHz
frequency signals (Wireless LANs,
wireless phones, microwave ovens, etc.) is placed near the devices being used
– When using a Bluetooth device (TV, laptop, etc.) other than the mobile
phone, the sound quality may be affected by the specifications and performance
of the device
3. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially explosive
atmosphere. It is rare, but your electronic device could generate sparks.
Sparks in such areas could cause an explosion or fire resulting in
24
! CAUTION
Do not disassemble, adjust, or repair the product arbitrarily. Do not place
the product near excessive heat or flammable material. The product may be
damaged if an incompatible charger is used. Make sure that an infant or child
does not swallow a magnet or a small component of the product. Make sure that
foreign objects do not enter the charger’s connectors (charging port and power
plug). Failure to do so may result in fire or electric shock. If you have a
medical device implanted, contact your doctor before using this device. This
product has a built-in battery, and the battery cannot be removed or replaced
arbitrarily. For your safety, do not remove the battery incorporated in the
product. If you arbitrarily replace the battery or don’t replace it correctly,
it may explode. The lithium-ion battery is a hazardous component that can
cause injury. Battery replacement by an unqualified professional can cause
damage to your device. Do not replace the battery by yourself. The battery can
be damaged, which can cause overheat and injury. The battery must be replaced
by authorised service provider. The battery should be recycled or disposed
separately from household wastes. Do not discard the battery arbitrarily.
Follow the local procedure for discarding batteries. Risk of fire or explosion
if the battery is replaced by an incorrect type.
17
bodily injury or even death. Areas with a potentially explosive atmosphere are
often, but not always, clearly marked.
4. Battery information
A rechargeable battery has a long service life if treated properly. A new
battery or one that has not been used for a long period of time could have
reduced capacity the first few times it is used. Do not expose the battery to
extreme temperatures, never above +50° or below -10°. For maximum battery
capacity, use the battery in room temperature. If the battery is used in low
temperatures, the battery capacity will be reduced. The battery can only be
charged in temperatures between 0° and +45°.
5. Recycling the battery in your Bluetooth Headset
The battery in your Bluetooth Headset must be disposed of properly and should
never be placed in municipal waste.
6. Conditions
– The warranty is valid only if the original receipt issued to the original
purchaser by the dealer, specifying the date of purchase and serial number, is
presented with the product to be repaired or replaced. LG Electronics reserves
the right to refuse warranty service if this information has been removed or
changed after the original purchase of the product from the dealer.
– This Warranty does not cover any failure of the product due to normal wear
and tear, or due to misuse, including but not limited to use in other
25
Do not store or transport at pressures lower than 11.6 kPa and at above 15000
m altitude. Replacement of a battery with an incorrect type that can defeat a
safeguard (for example, in the case of some lithium battery types). Disposal
of a battery into fire or a hot oven, or mechanically crushing or cutting of a
battery, that can result in an explosion. Leaving a battery in an extremely
high temperature surrounding environment that can result in an explosion or
the leakage of flammable liquid or gas. A battery subjected to extremely low
air pressure that may result in an explosion or the leakage of flammable
liquid or gas. Do not carelessly throw away old batteries. It can cause an
explosion or fire. The disposal method may vary by country and region. Dispose
of it in an appropriate manner.
NOTE
If the product is exposed to excessive sweat, clean the product. Keep the
earbuds clean. Wearing earbuds for a long time may cause pain, and if humidity
inside ears continues for a long time, it may cause skin trouble.
HD Speaker
If the communication network of the device you are connecting to supports HD
Voice Calling, you can enjoy making voice calls and listening to music in high
definition.
18
than the normal and customary manner, in accordance with instructions for use
and maintenance of the product. Nor does this warranty cover any failure of
the product due to accident, modification or adjustment, acts of God or damage
resulting from liquid. – This warranty does not cover product failures due to
improper repair installations, modifications or service performed by a non-LG
Electronics authorised person. Tampering with any of the seals on the product
will void the warranty.
Limited Warranty
SUBJECT TO THE CONDITIONS OF THIS LIMITED WARRANTY, LG ELECTRONICS WARRANTS
THIS PRODUCT TO BE FREE FROM DEFECTS IN DESIGN, MATERIAL AND WORKMANSHIP AT
THE TIME OF ITS ORIGINAL PURCHASE BY A CONSUMER, AND FOR A SUBSEQUENT PERIOD
OF ONE (1) YEAR. SHOULD YOUR PRODUCT NEED WARRANTY SERVICE, PLEASE RETURN IT
TO THE DEALER FROM WHOM IT WAS PURCHASED OR CONTACT YOUR LOCAL LG ELECTRONICS
CONTACT CENTER TO GET FURTHER INFORMATION.
Important Safety Information
Avoiding hearing damage
Permanent hearing loss may occur if you use your Headset at a high volume. Set
the volume to a safe level. You can adapt over time to a higher volume of
sound that may sound normal but can be damaging to your hearing.
26
Battery Status Indicator
Status Bluetooth Search Mode
Battery below 20%
Battery 20% – 80%
Battery 80% or more
When there is a problem while charging Charging (charger connected) Charging
complete (charger connected)
Description The battery status indicator flashes in blue. The battery status
indicator turns on and off in red. The battery status indicator turns on and
off in yellow. The battery status indicator turns on and off in green. The
battery status indicator flashes in red.
The battery status indicator turns on in red.
The battery status indicator turns on in green.
Out of Range
If the device connected to the product is out of effective communication
range, the communication signal becomes weak and the communication is lost.
The effective communication range may vary depending on surrounding and other
conditions. If the device comes back within effective communication range, the
product automatically reconnects to the device. If the device is not
automatically reconnected, touch the left or right earbud once to connect
them.
19
If you experience ringing in your ears or muffled speech, stop listening and
have your hearing checked. The louder the volume, the less time is required
before your hearing could be affected. Hearing experts suggest that to protect
your hearing:
· Limit the amount of time you use Headset at high volume. · Avoid turning up
the volume to block out noisy surroundings. · Turn the volume down if you
can’t hear people speaking
near you.
Please refer to your handset user guide for more information on how to adjust
listening levels on your handset.
Using headsets safely
Use of Headset to listen to music while operating a vehicle is not recommended
and is illegal in some areas. Be careful and attentive while driving. Stop
using this device if you find it disruptive or distracting while operating any
type of vehicle or performing any other activity that requires your full
attention.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product, please visit
https://opensource.lge.com. In addition to the source code, all referred
license terms, warranty disclaimers and copyright notices are available for
download.
27
LG TONE Free
If you install the “LG TONE Free” app, you can use Check Earbud Battery, Voice
Alert, Change Equalizer Mode, Check Last Connected Location Information, and
Find My Earbuds functions. Check out the app for more details. To install the
“LG TONE Free” app, search LG TONE Free in the Google Play Store or App Store
or scan the QR code below. It supports Android 7.0 or higher and iOS 11 or
higher.
Google Play
App Store
Troubleshooting
If you see any of the following symptoms while using the product, make sure to recheck it. It may not be a malfunction.
Symptom The power does not turn on
If unable to make a call with earbuds
Cause and Solution
Check the battery level and charge it.
If the mobile phone does not support headset and hands-free functions, you
cannot use the calling features. Check the battery level and charge it.
20
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost of
media, shipping, and handling) upon email request to opensource@lge.com.
This offer is valid for a period of three years after our last shipment of
this product. This offer is valid to anyone in receipt of this information.
Battery
Disposal of waste batteries/accumulators
1 This symbol may be combined with chemical symbols for mercury (Hg), cadmium
(Cd) or lead (Pb) if the battery contains more than 0.0005% of mercury, 0.002%
of cadmium or 0.004% of lead.
2 All batteries/accumulators should be disposed separately from the municipal
waste stream via designated collection facilities appointed by the government
or the local authorities.
3 The correct disposal of your old batteries/accumulators will help to prevent
potential negative consequences for the environment, animal and human health.
4 For more detailed information about disposal of your old
batteries/accumulators, please contact your city office, waste disposal
service or the shop where you purchased the product.
(http://www.lg.com/global/sustainability/ environment/take-back-recycling
/global-network-europe)
If unable to register earbuds to mobile phone
If you replaced the earbuds or there is a problem with the operation (Factory
reset)
Check whether earbuds are turned on.
Check if the earbuds have entered the search mode.
– While the earbuds are inserted in the charging case, press and hold the
touch pad on the left or right earbud for 3 to 5 seconds to switch to the
search mode.
While the earbuds are inserted in the charging case, press and hold the touch
pad on the left or right earbud for 10 seconds or more.
– The battery status indicator of the charging case flashes red and the
initialization to the factory status is carried out. After initialization to
the factory status, reconnect the earbuds.
*Factory reset and Search mode cannot be used in Plug and Wireless mode.
Specifications and Features
Item Bluetooth Specifications
Battery
Music Play Time Earbuds & With Charging case
Comments V 5.2 (Headset/Hands-Free/A2DP/AVRCP)
Earbud : 3.7 V / 68 mAh, Lithium-ion Charging case : 3.7 V / 390 mAh, Lithium-
ion
ANC Off : Up to 10 & Up to 24 hours ANC On : Up to 6 & Up to 15 hours
21
Removal of waste batteries and accumulators (Product with embedded battery
ONLY)
– In case this product contains a battery incorporated within the product
which cannot be readily removed by endusers, LG recommends that only qualified
professionals remove the battery, either for replacement or for recycling at
the end of this product’s working life. To prevent damage to the product, and
for their own safety, users should not attempt to remove the battery and
should contact LG Service Helpline, or other independent service providers for
advice.
– Removal of the battery will involve dismantling of the product case,
disconnection of the electrical cables/contacts, and careful extraction of the
battery cell using specialized tools. If you need the instructions for
qualified professionals on how to remove the battery safely, please visit
http://www.lge.com/global/sustainability/environment/take-back-recycling.
28
29
Charging Time
Rated Input Voltage
Operating Temperature Operating Humidity
Dimensions (mm) / Weight (g)
Earbud : within an hour / Charging case : within 2 hours Fast Charging : 5 min
charge for up to 60 min playtime* When charging wired at room temperature
Earbud : 5 V 0 136 mA Charging case : 5 V 0 500 mA
0 °C ~ +40 °C
5 % ~ 60 %
Earbud : 21.2 mm (W) X 28.3 mm (L) X 23.2 mm (H) / 5.2 g (One earbud) Charging
case : 54.5 mm (W) X 54.5 mm (L) X 30 mm (H) / 36.7 g
Frequency range
Output Power (Max)
2402 MHz to 2480 MHz
Earbud : 11.5 dBm Charging case : 10 dBm
*Duration of use may vary depending on the connected mobile device, features being used, settings, signal strength, operating temperature, frequency band, and other methods of use.
22
WEEE
Disposal of your old appliance
1 This crossed-out wheeled bin symbol indicates that waste electrical and
electronic products (WEEE) should be disposed of separately from the municipal
waste stream.
2 Old electrical products can contain hazardous substances so correct disposal
of your old appliance will help prevent potential negative consequences for
the environment and human health. Your old appliance may contain reusable
parts that could be used to repair other products, and other valuable
materials that can be recycled to conserve limited resources.
3 You can take your appliance either to the shop where you purchased the
product, or contact your local government waste office for details of your
nearest authorised WEEE collection point. For the most up to date information
for your country please see www.lg.com/global/recycling
RISK GROUP 2
CAUTION : UV EMITTED FROM THIS PRODUCT. EYE OR SKIN IRRITATION MAY RESULT FROM
EXPOSURE. USE APPROPRIATE SHIELDING.
WARNING : IF YOU DON’T DO CHARGING OR IF YOU OPEN THE CHARGING CASE, THE
UVNANO FUNCTION IS NOT ACTIVATED.
30
Declaration of Confirmation
DECLARATION OF CONFORMITY:
Hereby, LG Electronics declares that the radio equipment type this headset is
in compliance with the relevant statutory requirements. The full text of the
UK declaration of conformity is available at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
LG Electronics Inc. Single point of contact (EU/UK) : Krijgsman 1, 1186 DM
Amstelveen, The Netherlands. UK Importer : LG Electronics U.K. Ltd, Velocity
2, Brooklands Drive, Weybridge, KT13 0SL
Hereby, LG Electronics declares that the radio equipment type this headset is
in compliance with Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.
Android, Google Play, the Google Play logo, and other related marks and logos
are trademarks of Google LLC.
23
Symbols
~ Refers to alternating current (AC).
0 Refers to direct current (DC).
Refers to class II equipment.
1 Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
NOTE The complete manual is available for download from the LG Electronics
website.
www.lg.com > Support > Downloads > Manuals
The output level shall automatically return to an output level not exceeding
RS1 when the power is switched off.
31
References
- LG Electronics & Home Appliances | Shop Now | LG USA
- CeDoc
- Sustainability | LG Global
- LG Open Source
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>