Topwise G2-B Wireless 2D Barcode Scanner Instruction Manual

G2-B
Instruction manual
Wireless 2D Barcode Scanner

https://www.topwisesz.com/
support@topwisesz.com

Dear users, thank you for choosing our products. We are committed to providing you with high-quality items. To ensure the best experience with your new barcode scanner, please read this manual carefully before use.

Introduction

The universal handheld image 2D barcode scanner adopts the international advanced image transmission technology, with two-way communication instant error correction feedback, to complete a variety of commonly used one- dimensional codes and two-dimensional code reading. Equipped with auxiliary illumination, it can be used in different lighting environments and can also be used at night, which is highly applicable. 360 ° read barcodes in any direction, faster reading and more efficient operation, suitable for commercial POS systems, supermarkets, warehousing and logistics, books, banking, transportation, postal, and industrial, manufacturing production process management and other fields.
The setting code preceded with “**” is the default setting, not all functions of the product are listed in this manual, so please contact your supplier for more details. The rights used in this product, including the final interpretation right of this instruction manual are reserved by our company (The contents of this instruction manual are modified without notice).

Technical parameters

2D 5mil
Types of decoding| 1D:EAN13, EAN 8, UPC-A, UPC-E0, UPC-E1, Code128, Code39, Code93, Interleaved 2 of 5, Industrial 25, Matrix 2 of 5, Code11, CodaBar, MSI, RSS-14, RSS- Ltd, RSS- Exp, Standard 2 of 5, Plessey, ChinaPost 25, GS1 Composite
2D: QR Code, Data Matrix (DM), PDF417, Han Xin, Micro PDF417, Micro QRCode, MaxiCode, Aztec Code, Code16K
Operating temperature| Celsius -0°C — +50°C
Storage temperature| Celsius -0°C — +60°C
Operating humidity| 5%-95% (non-condensing)
Prompt mode| Buzzer, LED
Scan mode| Key Trigger, Continuous
Seismic resistance| Pass the 1. 5-meter free fall test

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Product features

1. This product adopts CMOS camera module, which can identify 1D/2D code and screen code.
2. Reading distance up to 20cm, which can quickly read out the information in the bar code.
3. This product is equipped with an inventory function which can directly carry out some simple daily inventory work. All parameter settings can be completed by scanning the setting code and saved in the memory of the barcode scanner, the inventory content and parameter settings can still be retained after the power if turned off.
4. This product equipped with one-key pairing function, simple and fast to complete the pairing of transmit/receive (This product has been paired at the factory).
5. Long distance transmission, 100 meters transmission distance in open area (Indoor transmission distance about 20-30 meters according to different structure and environment).

Installation method of receiver

1. Plug the wireless receiver into the USB port of the computer.
2. Once plugged in, the system will automatically install the driver (if the driver installation fails, please unplug the receiver or restart your computer).
3. After the driver is installed, the receiver can transmit data with the paired scanner.

Bluetooth Connection (For Bluetooth version)

The Bluetooth name of the device is “BARCODE SCANNER”, then click it to connect.

Turn on/off the configuration code setting

| |
---|---|---

Interface settings

|
---|---

Commonly terminator setting

|
---|---
|

Reading mode setting

|
---|---

Wireless Function Setting

|
---|---
|
|

Note:

1. Normal Mode: the scan result will be uploaded to the computer in real time (Default mode).
2. Inventory Mode: the scan result will be stored in the internal memory in this mode (When the memory is full, the buzzer will “long beep” as a reminder).
3. Data lossless mode: the scan results will be uploaded to the computer in real time when there is a signal; and the scan result will be stored in the internal memory when the signal is weak or no signal, and it will be automatically uploaded to computer when it has signal.
4. Data Upload:Scan the barcode to upload the data stored in the internal memory to the computer in turn (Suit for inventory mode and data lossless mode, please ensure the wireless signal is normal when uploading data, the buzzer will “beep” twice when the data is uploaded successfully, when the data is upload failure, the buzzer will “beep” 3 times).
5. Total number of data:Scanning this barcode will display the total number of stored data (suit for inventory mode).
6. Clear Data: Scan this barcode to clear all data in the internal memory.

Pairing Parameter Setting

1. Pairing setting code
2. Pairing Method

Scan the“One-click pairing”setting code first,plug the receiver to the USB port of the computer after hearing the buzzer “beep” 3 times .(Note: After the pairing is successful, the scanner’s buzzer will “beep” 3 times and disappear. Whole step will completed within 30 seconds.}

Sleep time setting

|
---|---
|
|
|

Note:Scan“Set Sleep time’setting code first, then scan the setting code for the time you want to set.

Language settings

| |
---|---|---
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |

Inverse reading mode

|
---|---

Battery Indicator

Buzzer settings

|
---|---

Buzzer Prompt Tone

Wireless barcode scanner Buzzer prompt tone list

Fault Resolution

Make sure that the host is powered on and is turned on when using the USB port that is connected to the USB port of the computer.
The interface cable connected incorrectly| Check if the cable connection is loose
2| Fill light is on but barcode
cannot be read| This type of barcode code system is not
turned on| Turn on the code by reading the setup code
The barcode is damaged| Try scanning other barcodes with the same barcode type
 Distance between scanner and barcode is
not optimal| Move the barcode scanner closer or farther from the barcode
The barcode scanner is not high enough to cover the barcode completely| Align the barcode to read the code
3| The scanned data is displayed incorrectly on the host| Input method error| Change input method to standard English input
Additional settings are made for the scanner| Restore the scanner’s parameters to factory settings or contact the
manufacturer’s after-sales service center
4| The barcode characters are garbled or incorrect| Keyboard country setting mismatch| Set the barcode scanner keyboard country to match the country in which the keyboard is used
5| Other issues| Device transfer error| Turn off the device power, properly connect the device to the scanner, turn on the device power, restore the scanner parameters to the factory setting state and re-scan the code

Simple maintenance method:

1. Stains and dust on the scanning window will affect the scanner’s work sometimes. It should use a good quality facial tissue and gently wipe it when cleaning. Then blow it clean with a blowing balloon. If you wipe with poor paper for a long time, it will damage the surface finish of the scanning window and affect the reading effect of the scanner.
2. The scanner housing can be wiped with a soft clean cloth. If needed, add a small amount of dish soap to the water and wipe it with a soft cloth dipped in water.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>