SEALEY LED021 Aluminium Magnetic Flexi Head Light User Manual

SEALEY LED021 Aluminum Magnetic Flexi Head Light User Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Refer to instructions

SAFETY

1. GENERAL

   • DO NOT shine directly into your, another person’s or an animal’s eyes.
   • DO NOT allow children to use the torch.
   • DO NOT use the torch if you suspect that the battery or the torch casing is damaged.
   • DO NOT leave batteries in a discharged state. Before storage remove batteries.

2. BATTERY SAFETY
   ‰ WARNING! To reduce the risk of burns or fire:

   • DO NOT attempt to open the batteries.
   • DO NOT crush, puncture, short contacts or dispose of in fire or water.
   • DO NOT expose to temperatures above 60°C (140°F).
   • Replace only with the batteries designed for this product.
   • Recycle or dispose of used batteries as stipulated by local regulation.
   • If the electrolyte in the batteries gets on your skin, rinse thoroughly with water. If it gets in your eyes, rinse thoroughly with cool water and seek immediate medical attention.

INTRODUCTION

SMD LED produces 270 lumens. Flexible head bends and holds position to allow bright illumination in confined spaces. Adjustable focus from spotlight to wide area by a push/pull action of the head. Features a magnet in the end for hands-free use. Powered by 3 x AAA batteries (not included).

SPECIFICATION

Model No: LED021
Battery: 3 x AAA (not included)
LED Type: SMD LED
Lumen Output: 270lm
Operating Time: 4hr
Range: 100m

OPERATION

1. Unscrew the bottom of the body of pen light to load 3 x 1.5v AAA batteries with “+” polarity inward.

2. Replace the end cap on bottom of pen light.

3. Press the button at the top of the body to turn XPE LED on (fig.2).
   

4. Press again to turn XPE LED off (fig.2).

5. To change the width of the beam, slide the lens backwards and forwards to adjust from a wide beam to a focused beam (fig.1)
   
   

MAINTENANCE

1. Keep the torch clean by wiping with a damp cloth.
2. Remove batteries if not being used for a long period of time.
3. Store torch and batteries in a dry childproof area.

| ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.|
---|---|---
| WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information.
| BATTERY REMOVAL: SEE SECTION 4
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>