EG4 ELECTRONICS 18kPV 12LV All In One Hybrid Inverter Instructions

June 16, 2024
EG4 ELECTRONICS

EG4 ELECTRONICS 18kPV 12LV All In One Hybrid Inverter

EG4 ELECTRONICS-18kPV-12LV-All-In-One-Hybrid-Inverter-
PRODCUT

Specifications

  • Product Name: 18kPV Jumper Wire
  • Compatibility: Inverter RSD terminals
  • Colour: Red

Product Usage Instructions

Package Inspection
Upon receiving the package, carefully inspect the contents to ensure that the 18kPV Jumper Wire is included.

Installation with External RSD
If you are installing an external Rapid Shutdown Device (RSD) along with the inverter, follow these steps:

  1. Locate the inverter RSD terminals.
  2. Check if the unit came equipped with a small red jumperwire.
  3. If the jumper wire is present, carefully remove it from the inverter RSD terminals.
  4. Connect the external RSD to the inverter RSD terminals.

Installation without External RSD
If you are not installing an external Rapid Shutdown Device (RSD), follow these steps:

  1. Locate the inverter RSD terminals.
  2. Check if the unit came equipped with a small red jumperwire.
  3. If the jumper wire is present, leave it in place. No further action is required.

INSTRUCTION

  • Upon receiving the package, please check the inverter RSD terminals for a small red jumper wire.
  • If the unit comes equipped with said jumper, ONLY remove the jumper when installing an external RSD (Rapid Shutdown Device).
  • If not installing an external RSD, leave the jumper in place.

WIRING

EG4 ELECTRONICS-18kPV-12LV-All-In-One-Hybrid-Inverter-
FIG-1

FAQ

Frequently Asked Questions

  • Q: What is the purpose of the red jumper wire?
    • A: The red jumper wire is used to connect or disconnect the inverter RSD terminals when installing or not installing an external Rapid Shutdown Device (RSD).
  • Q: Can I reuse the red jumper wire if I remove it?
    • A: Yes, the red jumper wire is reusable. Keep it in a safe place for future use if needed.
  • Q: Is the 18kPV Jumper Wire compatible with all inverters?
    • A: The 18kPV Jumper Wire is specifically designed for use with inverters that have RSD terminals. Please refer to the inverter user manual to ensure compatibility.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

EG4 ELECTRONICS User Manuals

Related Manuals