SEALEY MS0621 Wheel Bearing Puller 3 Jaw Instruction Manual

: June 16, 2024
: SEALEY

Table of Contents

SEALEY MS0621 Wheel Bearing Puller 3 Jaw
Product Usage Instructions
Product Introduction
INTRODUCTION
OPERATION AND MAINTENANCE
Warranty
Contact
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SEALEY MS0621 Wheel Bearing Puller 3 Jaw

SEALEY-MS0621-Wheel-Bearing-Puller-3-Jaw-PRODUCT

Specifications

Product : Sealey kit
Manufacturer : Sealey
Standard: High
Warranty : 12 months from purchase date

Product Usage Instructions

Safety

Before using the Sealey kit, it is important to ensure the following:

Adhere to Health & Safety, local authority, and general workshop practice regulations.
Familiarize yourself with the specific applications, limitations, and potential hazards of the kit.
Use the kit in conjunction with inspection maintenance procedures recommended in the vehicle manufacturer’s manual.
Wear appropriate personal protective equipment for the task. A full range is available from your Sealey stockist.
Do not use the kit for any purpose other than its intended design.
Ensure the vehicle is properly supported with axle stands before working underneath it.
Ensure there is adequate lighting in the working area.
Keep children and unauthorized persons away from the working area.
Do not use the kit if any parts are damaged or missing.
Avoid using the kit when tired, under the influence of alcohol, drugs, or intoxicating medication.
After use, store the kit in a safe, dry, childproof area.

Product Introduction

The Sealey kit is a high-quality product designed to provide years of trouble- free performance when used according to the instructions and properly maintained.

Contents

The contents of the Sealey kit are not specified in the provided text. Please refer to the original language version or the packaging for a detailed list of contents.

Operation

Follow these steps to operate the bearing puller included in the Sealey kit:

Make sure the threads are clean before using the bearing puller for the first time.
Unscrew the jaws enough on the threaded bar so that the cone is not pressing on the jaws.
Insert the jaws into the middle of the bearing.
Hold the jaws and screw the threaded bar down so that the cone presses on the jaws.
Hold the nut on top of the crossbar with a spanner and wind the puller unit up.

Maintenance

To ensure optimal performance and longevity of the Sealey kit, follow these maintenance guidelines:

Keep all items clean and lightly oiled.
Regularly lubricate the threads and ensure they are free from grit.

Environment Protection

Recycle unwanted materials instead of disposing of them as waste. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note

It is our policy to continually improve products, and as such, we reserve the right to alter data, specifications, and component parts without prior notice.

Important: No Liability is accepted for incorrect use of this product.

Warranty: The guarantee is 12 months from the purchase date, and proof of purchase is required for any claim.

FAQ

Q: What should I do if any parts of the kit are damaged or missing?

A: Do not use the kit if any parts are damaged or missing, as this may cause failure and/or personal injury. Contact Sealey or your Sealey stockist for assistance in replacing the damaged or missing parts.

Q: Where can I find the appropriate personal protective equipment for the task?

A: A full range of personal protective equipment is available from your Sealey stockist. Please consult them for the specific equipment required for your task.

Q: How should I store the kit after use?

A: After use, store the kit in a safe, dry, childproof area to ensure its longevity and prevent any accidents.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT : PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this tool.
WARNING! Familiarise yourself with the specific applications and limitations of the kit, as well as any potential hazards.
This kit should be used in conjunction with inspection maintenance procedures recommended in the vehicle manufacturer’s manual.
Ensure that the kit is correct for the task.
Wear the appropriate personal protective equipment for the task. A full range is available from your Sealey stockist.
DO NOT use the kit for any purpose other than that for which it is designed.
Ensure that the vehicle is properly supported with axle stands before working under the vehicle.
Ensure there is adequate lighting prior to using the kit. A range of inspection lamps are available from your Sealey stockist.
Keep children and unauthorised persons away from the working area.
DO NOT use the kit if any parts are damaged or missing, as this may cause failure and/or personal injury.
DO NOT use the kit when you are tired, or under the influence of alcoh ol, drugs or intoxicating medication.
After use, store in a safe, dry childproof area.

INTRODUCTION

3-Jaw design applies even pressure preventing damage to bearings. Designed to remove bearings with Ø12-38mm internal diameter. Forged and heat treated steel jaws for greater strength. Corrosion resistant black oxide finish.

CONTENTS

SEALEY-MS0621-Wheel-Bearing-Puller-3-Jaw-FIG2

OPERATION AND MAINTENANCE

OPERATION FIG.1

NOTE : Make sure threads are clean before using bearing puller for the first time.

Unscrew the jaws enough on the threaded bar, that the cone is not pressing on the jaws.
Insert the jaws into the middle of the bearing.
Hold the jaws and screw the threaded bar down so that the cone presses on the jaws.
Hold the nut on top of the crossbar with a spanner and wind the puller unit up.

MAINTENANCE

Keep all items clean and lightly oiled. Keep all threads free from grit and lubricate the thread regularly.

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note : It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important : No Liability is accepted for incorrect use of this product.