Briloner Leuchten MAL 7157 LED Panel Ceiling Light Instruction Manual
- June 16, 2024
- Briloner Leuchten
Table of Contents
Briloner Leuchten MAL 7157 LED Panel Ceiling Light
Product Information
- Product Name: MAL 7157
- Manufacturer: Briloner Leuchten GmbH & Co. KG
- Address: Am Steinbach 14, D-59872 Meschede
- Revision: 04_09/2022
Specifications:
- The lamps should only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
- The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light.
- Maintenance of the lights is limited to the surfaces. Do not clean with water or other liquids. Use only a dry, lint-free cloth for cleaning.
- Before connecting to the mains, always check the entire light for possible damage. Do not use the light if any damage is noticed.
- Disconnect the mains cable from the power supply before assembling or disassembling. Switch off the earth leakage circuit breaker/automatic circuit breaker or unscrew the fuse. Turn the switches to OFF.
- Before drilling the mounting holes, ensure that no gas, water, or electricity pipes and wires can be drilled through or damaged in your chosen mounting location.
- During mounting, ensure that the attachment material is suitable for the subsurface and capable of carrying the weight of the fixture. The manufacturer is not liable for improper installation on the relevant subsurface.
- The symbol of the crossed-out garbage can on the product or packaging means that the product must not be disposed of with ordinary household waste.
Product Usage Instructions
Installation:
- Ensure that the installation is carried out by authorized and qualified technicians in accordance with the valid regulations for electrical installation.
- Inspect the light for any damage before connecting it to the mains. If any damage is noticed, do not use the light.
- Disconnect the mains cable from the power supply before assembling or disassembling the light. Switch off the earth leakage circuit breaker/automatic circuit breaker or unscrew the fuse. Turn the switches to OFF.
- Choose a suitable mounting location, ensuring that no gas, water, or electricity pipes and wires can be drilled through or damaged.
- Use appropriate attachment material that is suitable for the subsurface and capable of carrying the weight of the fixture.
- Follow any additional installation instructions provided by the manufacturer.
Maintenance:
The maintenance of the lights is limited to the surfaces. Do not clean with water or other liquids. Use only a dry, lint-free cloth for cleaning.
FAQ
Q: Can I clean the light with water?
A: No, for electrical safety reasons, do not clean the light with water or other liquids. Use only a dry, lint-free cloth for cleaning.
Q: What should I do if I notice any damage to the light?
A: If you notice any damage to the light, do not use it. Contact authorized and qualified technicians for further assistance.
Q: How should I dispose of the product?
A: The symbol of the crossed-out garbage can on the product or packaging indicates that it must not be disposed of with ordinary household waste. Please follow proper disposal methods according to local regulations.
Mounting instructions
Safety directions
Safety directions / Please read this information carefully before installing or using this product. Please keep this user manual for further reference.
-
The lamps may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
-
The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light.
-
Maintenance of the lights is limited to the surfaces. For electrical safety reasons, this product must not be cleaned with water or other liquids. Use only a dry, lint-free cloth for cleaning.
-
Caution! Risk of electric shock. Before connecting to the mains, always check the entire light for possible damage. Never use the light if you notice any damage.
-
Caution! Disconnect the main cable from the power supply before assembling or disassembling. Switch off the earth leakage circuit
breaker/automatic circuit breaker or unscrew the fuse. Turn the switches to “OFF”. -
Caution! Before drilling the mounting holes, make sure that no gas, water or electricity pipes and wires can be drilled through or damaged in your chosen mounting location.
-
When mounting, ensure that the attachment material is suitable for the subsurface and that this surface is capable of carrying the weight of the fixture. The manufacturer is not liable for improper installation of the item on the relevant subsurface.
-
The symbol of the crossed-out garbage can on the product or the packaging means that the product must not be disposed of with ordinary household waste. At the end of its useful life, the product must be returned to a point of acceptance for the recycling of electric and electronic devices. Please ask your local municipality for the point of acceptance.
-
Safety class II . This light is specially insulated and must not be connected to an earthed conductor.
-
Description of the supply terminals: L = Phase N = Neutral conductor G = Earthed conductor.
-
Protective covers and end covers for mains voltage control parts must always be mounted.
-
Do not install the light on a damp or conductive subsurface.
-
Please make sure that no cables get damaged during the installation work.
-
The lights have a protection class rating of “IP20“ and are solely intended for indoor use only of private households.
-
Do not look directly into the light source (illuminant, LED, etc.).
-
The light source of this lamp is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
-
This product contains a light source of energy efficiency class „D“, based on the EU regulation 2019/2015.
-
LED colour deviation when using different chargers may occur. The light colour and luminous strength of the LEDs can also change as a result of the life span level from the lamp.
-
This article is not suitable for use with dimmable electric circuits.