Briloner Leuchten MAL 7423 C Lights Lamps Instruction Manual

: June 13, 2024
: Briloner Leuchten

Table of Contents

MAL 7423 C Lights Lamps
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MAL 7423
Mounting instructions

MAL 7423 C Lights Lamps

Briloner Leuchten MAL 7423 C Lights Lamps

Safety directions / Please read this information carefully before installing or using this product. Please keep this user manual for further reference.

The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light.
Maintenance of the lights is limited to the surfaces. For electrical safety reasons, this product must not be cleaned with water or other liquids. Use only a dry, lint-free cloth for cleaning.
Caution! Risk of electric shock. Before connecting to the mains, always check the entire light for possible damage. Never use the light if you notice any damage.
**** The symbol of the crossed-out garbage can on the product or the packaging means that the product must not be disposed with ordinary household waste. At the end of its useful life, the product must be returned to a point of acceptance for the recycling of electric and electronic device. Please ask your local municipality for the point of acceptance.
Please make sure that no cables get damaged during the installation work.
Place the lamp on horizontal surfaces only.
The lights have a protection class rating of “IP44“ and are approved for use in the exterior areas of private households.
Do not look directly into the light source (illuminant, LED, etc.).
The included or insurable LED light bulb can be replaced by the end customer.
This product contains a light source of energy efficiency class „G“, based on the EU regulation 2019/2015.
LED colour deviation when using different chargers may occur. The light colour and luminous strength of the LED’s can also change as a result of life span level from the lamp.
This article is not suitable for use with dimmable electric circuits. It can be dimmed to “3“ different levels by repeatedly touching the sensor area “A1“. Pressing down the “A1” sensor area for “ ≥ 3sec.” switches on the light.
The integrated USB socket does not have data function and is only provided to connect the device to the power supply.
Batteries or rechargeable batteries are not permitted in domestic waste. They must be decontaminated according to the regulations of the responsible authorities as hazardous waste. Use the available collection points.