Briloner Leuchten MAL 3728 LED Panel Dimmbar 31W 3500 Instruction Manual

Leuchten MAL 3728
LED Panel Dimmbar 31W 3500
Instruction Manual

MAL 3728 LED Panel Dimmbar 31W 3500

Safety directions

Please read this information carefully before installing or using this product. Please keep this user manual for further reference.

1. The lamps may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
2. The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light.
3. Maintenance of the lights is limited to the surfaces. For electrical safety reasons, this product must not be cleaned with water or other liquids. Use only a dry, lint-free cloth for cleaning.
4. Caution! Risk of electric shock. Before connecting to the mains, always check the entire light for possible damage. Never use the light if you notice any damage.
5. Caution! Disconnect the mains cable from the power supply before assembling or disassembling. Switch off the earth leakage circuit breaker/automatic circuit breaker or unscrew the fuse. Turn the switches to “OFF”.
6. Caution! Before drilling the mounting holes, make sure that no gas, water or electricity pipes and wires can be drilled through or damaged in your chosen mounting location.
7. When mounting, ensure that the attachment material is suitable for the subsurface and that this surface is capable of carrying the weight of the fixture. The manufacturer is not liable for improper installation of the item on the relevant subsurface.
8. **** The symbol of the crossed-out garbage can on the product or the packaging means that the product must not be disposed with ordinary household waste. At the end of its useful life, the product must be returned to a point of acceptance for the recycling of electric and electronic device. Please ask your local municipality for the point of acceptance.
9. Safety class II ****. This light is specially insulated and must not be connected to an earthed conductor.
10. Description of the supply terminals: L = Phase N = Neutral conductor ****= Earthed conductor.
11. Protective covers and end covers for mains voltage control parts must always be mounted.
12. Do not install the light on a damp or conductive subsurface.
13. Please make sure that no cables get damaged during the installation work.
14. Attention! During operation, lamp parts and illuminants can reach temperatures of more than 60°C. Do not touch during operation!
15. The lights have a protection class rating of “IP20“ and are solely intended for indoor use only of private households.
16. Do not look directly into the light source (illuminant, LED, etc.).
17.   The light source of this lamp is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
18. This product contains a light source of energy efficiency class „E“, based on the EU regulation 2019/2015. Reference setting: “4000K“.
19. LED colour deviation when using different chargers may occur. The light colour and luminous strength of the LED’s can also change as a result of life span level from the lamp.
20. This article is not suitable for use with dimmable electric circuits. It can be controlled using the accompanying remote control.
21. Lamp with remote control: The lights can only be switched on by remote control when there is no obstruction between the remote control and the lights.
22. Available functions of the product:
23. The “ON” button switches the lights on with the last switch position to have been used. The “OFF” button switches the lights off.
24. The “Dim+“ and “Dim-“ buttons brighten and dim the lights either in stages or continuously.
25. The “CW” and “WW” buttons move the colour temperature closer to cool white or warm white either in stages or continuously.
26. The “Night Light” button switches the lights to their dimmest setting with a colour temperature of approximately “2700K”.
27. The “WHOLE LIGHT“ button switches the lamp to a dimming level of “100%”.
28. The “Timer” button switches the lights off after “30” minutes.
29. The push-button “WW/NW/CW“ toggles the colour temperature of the light in “3“ stages between cold white and warm white.
30. Batteries or rechargeable batteries are not permitted in domestic waste. They must be decontaminated according to the regulations of the responsible authorities as hazardous waste. Use the available collection points.

Dear customer: If, contrary to expectations, defects are discovered despite the latest production methods and the most precise quality controls, please contact us.
Please contact the following free hotline, stating the date of purchase, the place of purchase and the item number of the product: 00800/BRILONER (00800/27456637) Brilon lights / in the cushion 2 / 59929 Brilon

Revision 00_01/2022
MAL3728

Documents / Resources

| Briloner Leuchten MAL 3728 LED Panel Dimmbar 31W 3500 [pdf] Instruction Manual
MAL 3728 LED Panel Dimmbar 31W 3500, MAL 3728, LED Panel Dimmbar 31W 3500, Dimmbar 31W 3500
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>