BaByliss C458E Titanium Brilliance Conical Curling Iron Instructions

June 16, 2024
BaByliss

**BaByliss C458E Titanium Brilliance Conical Curling Iron Instructions

**

Read the safety instructions first.

WARNING! Take care to avoid the hot surface of the appliance coming into direct contact with the skin, in particular the eyes, ears, face and neck.

WARNING! Do not touch the hot barrel or metal parts of the appliance whilst hot

Switch Activation Control

IMPORTANT! This appliance features delayed activation control. Immediately after turning the appliance on, you are able to adjust the temperature settings. After 5 seconds of the appliance being on, the temperature buttons will automatically lock. To adjust the heat settings, hold down the ‘+/-‘ button for 1-2 seconds. This will deactivate the lock mode and allow the settings to be changed. To turn off the appliance whilst in lock mode, hold down the button marked ‘ ’ until the appliance switches off.

HOW TO USE

  • Ensure the hair is dry and combed through to remove any tangles. Divide the hair into sections ready for styling.

  • Press and hold the button marked ‘ ’ for 1-2 seconds to turn the appliance on. The digital display will start flashing and the appliance will automatically start heating up.

  • Press the ‘+/-’ button to select a heat setting suitable for your hair type. The digital display will flash until the selected heat setting has been reached. Once the temperature has been reached, the digital display will remain solid in colour.
    Please note : The appliance temperature settings will automatically lock after 5 seconds. (See ‘Switch Activation Control’).
    Please note : Before styling, make sure the universal heat glove is worn on the hand which is wrapping the hair around the barrel.

  • Take a section of hair, starting 2 inches from the scalp and place the appliance next to the hair section, ensuring the end of the appliance is pointing downwards towards the shoulder.

  • Start winding the hair around the top part of the barrel, closest to the handle. Keep winding the hair down the length of the barrel until there is no more hair to wrap around.

  • Hold the end of the hair in place for 5-8 seconds depending on your hair type. Then unwind or release the section of hair and pull the appliance away.

  • Allow the curl to cool before styling.

  • Repeat for each section of hair.

  • After use, press and hold the ‘ ’ button for 1-2 seconds to switch off and unplug the appliance.

  • Allow the appliance to cool before storing away.

Heat Settings

If you have delicate, fine, bleached or cultured hair, use the lower heat settings. For thicker hair, use the higher heat settings. It is suggested to always complete a test on initial use to ensure the correct temperature is used on the hair type. Start on the lowest setting and increase the temperature until the desired result is achieved.

There are 6 temperature settings to select from; 160°C, 170°C, 180°C, 190°C, 200°C and 210°C.

Auto Shut Off

This appliance has an automatic shut off feature for added safety. If the appliance is switched on for more than 60 minutes continuously, it will automatically switch off. If you wish to continue using the appliance after this time, simply press and hold the ‘ ’ button for 1-2 seconds to turn the power on again.

Heat Mat

The appliance comes with a heat mat for use during and after styling. During use, do not place the appliance on any heat sensitive surface, even when using the heat mat provided. After use, switch off and unplug the appliance. Immediately wrap the appliance in the heat mat provided and allow to fully cool down. Continue to keep it out of reach of children, as it will remain hot for several minutes.

Heat Protective Glove

IMPORTANT! A universal heat protective glove has been supplied to help protect the hand from temporary contact with the barrel when wrapping the hair around the appliance. The heat protective glove is only designed to give initial contact protection. Discomfort will be caused with prolonged contact with the hot surface

CARE & MAINTENANCE

To help keep your appliance in the best possible condition, please follow the steps below:

  • Do not wrap the lead around the appliance, instead coil the lead loosely by the side of the appliance.
  • Do not use the appliance at a stretch from the power point.
  • Always unplug after use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals