Litokam B0CC1VPDC9 5ghz Indoor Security Camera Instruction Manual

: June 16, 2024
: Litokam

Table of Contents

Litokam B0CC1VPDC9 5ghz Indoor Security Camera
Camera Introduction
How to Set Up
Storage Methods
Frequently Asked Questions
Litokam Customer Care
Warranty
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Litokam B0CC1VPDC9 5ghz Indoor Security Camera

Litokam-B0CC1VPDC9-5ghz-Indoor-Security-Camera-
product

Camera Introduction

Litokam-B0CC1VPDC9-5ghz-Indoor-Security-Camera-fig-1

How to Set Up

To set up your Litokam camera, please follow these steps:

Litokam-B0CC1VPDC9-5ghz-Indoor-Security-Camera-fig-2

Step 1: Download the “Littlelf Smart” APP, and register an account on APP via Email.
Step 2: Power on the camera, and make sure your mobile phone is already connected to WiFi.
Step 3: Open the “Littlelf Smart” APP, click “+” or “Add Device” button on the home page (Picture 1); Then click “5GHz Camera” and “LF-P1t Pro” (Picture 2) , please check and confirm the camera status then click ” Next” (Picture 3).
Step 4: Align the QR code on the phone screen with the camera lens (at a distance of 15-20cm), and upon hearing the “Scan QR code successfully”, click “Hear the beep” (refer to Picture 4).
Step 5: Wait for the network configuration to complete successfully, and then begin using your camera (refer to Picture 5).

Storage Methods

There are two storage methods available for your convenience:

Cloud storage

Litokam-B0CC1VPDC9-5ghz-Indoor-Security-Camera-fig-5

You may opt to subscribe to a cloud storage package, which will enable the camera to automatically save videos. Please follow the necessary steps to activate this option.

Micro SD card storage

Litokam-B0CC1VPDC9-5ghz-Indoor-Security-Camera-fig-6

Alternatively, you may insert a micro SD card and turn on the Record Button to save event recordings.

Frequently Asked Questions

Q1: How do you troubleshoot a security camera?
- A: If your camera’s red light flashes rapidly during connections, it can usually be connected normally. However, if the light is in another abnormal state, please follow these 6 quick tips to fix your security camera troubleshooting:
1. Try using a different cable and plug if the light is not flashing red.
2. Update the software and firmware.
3. Reset the camera to its factory settings.
4. Check whether the router password (WiFi password, but not app account password) is correct
5. Place the camera close to the router and ensure that the network environment has strong and stable signals.
Q2: How do I record after inserting the Micro SD card?
- A: Please follow these instructions:
1. Click the “..” icon located in the top right corner of the live video interface.
2. Click on “Recording Settings”.
3. Turn on “Local Recording”. The camera will automatically begin recording video.
4. Select “Recording Mode”, and “Event Recording”. The camera will now automatically record video when motion is detected.
5. Select “Recording Mode”, and “Non-Stop”. The camera will continue to record video.
Q3: How can I view motion detection videos instead of screenshots?
- A: If you want to watch motion detection videos you will need to use either an Micro SD card or a cloud service, if you are already using one of these, follow these steps to check for motion detection videos:
1. Please open your app and click on Home;
2. Select your camera and go to the camera live video page;
3. Click on “Message” in the left bottom corner;
4. Click on “All”;
5. Click on the “View” button to view the recording video.