Litokam A1 2K 4MP Security Camera Instruction Manual

: June 14, 2024
: Litokam

Table of Contents

Litokam A1 2K 4MP Security Camera
Product Information
Product Usage Instructions
Service Upgrade
Camera Introduction
How to Set Up
Storage Methods
Install the Camera
Frequently Asked Questions
Litokam Customer Care
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Litokam A1 2K 4MP Security Camera

Product Information

The Litokam camera is a smart home security camera that features a 24/7 online chat function for customer support. It has a status light, lens, microphone, speaker, and a micro SD card slot for storage. The camera supports 2.4GHz WiFi for connectivity. Users can choose between cloud storage or micro SD card storage for saving videos.

Product Usage Instructions

Download the Littlelf Smart APP and register an account via email.
Power on the camera and ensure your mobile phone is connected to a 2.4GHz WiFi network.
Open the Littlelf Smart APP and click the “+” or “Add Device” button on the home page. Then select “Cam A1”.
Align the QR code on the phone screen with the camera lens and wait for the successful scan.
Wait for the network configuration to complete and start using your camera.

To activate storage options:

Cloud storage: Subscribe to a cloud storage package to automatically save videos.
Micro SD card storage: Insert a micro SD card and turn on the Record Button to save event recordings.

To install the camera:

Rotate the bracket to separate it from the camera.
Drill holes according to the installation holes on the bracket and install the bracket with included screws.
Screw the camera to the bracket.
Adjust the camera angle for the best field of view and secure it by turning the bracket clockwise. Use drywall anchors if needed.

Frequently Asked Questions:

Q: How do you troubleshoot a security camera?
Q: How do I record after inserting the Micro SD card?
A: To record after inserting the Micro SD card:
Click the “…” icon in the top right corner of the live video interface.
Select “Recording Settings”.
Turn on “Local Recording”. The camera will automatically start recording video.
Select “Recording Mode” and choose between “Event Recording” or “Non-Stop” based on your preferences.
Q: How can I view motion detection videos instead of screenshots?
A: To view motion detection videos:
Open the app and click on “Home”.
Select your camera and go to the live video page.
Click on “Message” in the bottom left corner.
Click on “All”.
Click on the “View” button to watch the recording video.

Service Upgrade

We are pleased to announce a recent service upgrade to the Littlelf Smart APP, which now features a 24/7 online chat function. Should you have any inquiries, simply click the “Live Chat” button to connect with our team of support specialists who are readily available to assist you. Thank you for choosing Litokam.

Chat with us:

Camera Introduction

Litokam-A1-2K-4MP-Security-Camera-fig-2

How to Set Up

To set up your Litokam camera, please follow these steps:

Step1 Download “Littlelf Smart” APP , and register an account on APP via Email.
Step2 Power on the camera, and make sure your mobile phone is already connected to WiFi (only 2.4Ghz WiFi is supported)
Step3 Open the “Littlelf Smart” APP, click “+” or “Add Device” button on the home page (Picture 1); Then click “Cam A1″ (Picture 2) , please check and confirm the camera status then click ” Next” (Picture 3).
Step 4 Align the QR code on the phone screen with the camera lens (at a distance of 15-20cm), and upon hearing the “Scan QR code successfully”, click “Hear the beep” (refer to Picture 4).
Step5 Wait for the network configuration to complete successfully, and then begin using your camera (refer to Picture 5).

Storage Methods

There are two storage methods available for your convenience:

Cloud storage
You may opt to subscribe to a cloud storage package, which will enable the camera to automatically save videos. Please follow the necessary steps to activate this option.
Micro SD card storage
Alternatively, you may insert a micro SD card and turn on the Record Button to save event recordings.

Install the Camera

Install the camera 2-3 meters (7-10 ft) above the ground. This height maximizes the detection range of the Ai detection.

Installation Tips

Do not face the camera towards any light sources.
Do not point the camera towards a glass window. Otherwise, it may result in poor image quality because of the window glare caused by infrared LEDs, ambient lights or status lights.
Please do not position the camera in a shaded area and instead aim it towards a well-lit area, as this may lead to subpar image quality. To ensure optimal image q uality, it is advisable to place the camera and the subject being captured in a similar lighting environment.
Make sure the power port is not directly exposed to water or moisture and not blocked by dirt or other elements.
The waterproof camera can work properly under conditions like rain and snow. However, it doesn’t mean the camera can work underwater.
Do not install the camera at places where rain and snow can hit the lens directly.

Mount the Camera

Rotate the bracket to separate it from the camera.
Drill holes in accordance with the installation holes on the bracket and Install the bracket with screws included in the package.
Screw the camera to the bracket.
Adjust the camera angle to get the best field of view. And secure the camera by turning the bracket clockwise.

Frequently Asked Questions

Q1: How do you troubleshoot a security camera?

A: If your camera’s red light flashes rapidly during connections, it can usually be connected normally. However, if the light is in another abnormal state, please follow these 6 quick tips to fix your security camera troubleshooting:

Try using a different cable and plug if the light is not flashing red.
Update the software and firmware.
Reset the camera to its factory settings.
Check whether the router password (WiFi password, but not app account password) is correct.
Place the camera close to the router and ensure that the network environment has strong and stable signals.
Verify that your device has been added over a Wi-Fi band of 2.4 GHz. Check whether the 2.4 GHz band and 5 GHz band share the same Wi-Fi account. If so, we recommend that you configure two accounts and switch to the 2.4 GHz band during network connection.

Q2: How do I record after inserting the Micro SD card?

A: Please follow these instructions:

Click the “…” icon located in the top right corner of the live video interface.
Click on “Recording Settings”.
Turn on “Local Recording”. The camera will automatically begin recording video.
Select “Recording Mode”, and “Event Recording”. The camera will now automatically record video when motion is detected.
Select “Recording Mode”, and “Non-Stop”. The camera will continue to record video.

Q3: How can I view motion detection videos instead of screenshots?

If you want to watch motion detection videos you will need to use either an Micro SD card or a cloud service, if you are already using one of these, follow these steps to check for motion detection videos：