Litokam Cam S1 Outdoor Camera Instruction Manual

: June 13, 2024
: Litokam

Table of Contents

Litokam Cam S1 Outdoor Camera
Product Information
Product Usage Instructions
Service Upgrade
Camera Introduction
How to Set Up
Storage Methods
Micro SD card storage
Install the Camera
Mount the Camera
Frequently Asked Questions
Litokam Customer Care
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Litokam Cam S1 Outdoor Camera

Product Information

The Litokam camera is a smart camera that offers various features and functions to enhance your home security. It has a compact size of 88x164mm, making it easy to install and place anywhere in your home.

The camera features a status light, lens, microphone, and speaker, allowing you to monitor and communicate remotely. It supports 2.4GHz WiFi connection for seamless connectivity.

There are two storage options available for your convenience: cloud storage and micro SD card storage. You can choose to subscribe to a cloud storage package for automatic video saving or insert a micro SD card and activate the record button to save event recordings.

The Littlelf Smart APP is the companion application for the Litokam camera. It provides a user-friendly interface and allows you to control and monitor your camera remotely. The recent service upgrade includes a 24/7 online chat function, enabling you to connect with support specialists for any inquiries or assistance.

Product Usage Instructions

Download the Littlelf Smart APP on your mobile phone and register an account via email.
Power on the camera and ensure your mobile phone is connected to a 2.4GHz WiFi network.
Open the Littlelf Smart APP and click on the “+” or “Add Device” button on the home page.
Select “Cam S1” from the available options and confirm the camera status.
Align the QR code on the phone screen with the camera lens at a distance of 15-20cm. Upon successful alignment, click on “Hear the beep”.
Wait for the network configuration to complete successfully.
Choose your preferred storage method:
- For cloud storage, follow the necessary steps to activate the option.
- For micro SD card storage, insert a micro SD card and turn on the Record Button to save event recordings.
Mount the camera onto the bulb base by twisting it clockwise. Use the included drywall anchors if needed.
To troubleshoot a security camera, refer to the FAQs and Guide Video available on the Littlelf Smart app or official website.
To record video after inserting a micro SD card, follow these steps:
- Click on the “…” icon located in the top right corner of the live video interface.
- Select “Recording Settings”.
- Turn on “Local Recording”. The camera will automatically begin recording video.
- Select “Recording Mode” and choose either “Event Recording” or “Non-Stop” based on your preferences.
To view motion detection videos instead of screenshots, follow these steps:
- Open the Littlelf Smart app and click on “Home”.
- Select your camera and go to the camera live video page.
- Click on “Message” in the bottom left corner.
- Click on “All”.
- Click on the “View” button to watch the recorded video.
For additional support, refer to the FAQs and Guide Video available on the Littlelf Smart app or official website.

Service Upgrade

We are pleased to announce a recent service upgrade to the Littlelf Smart APP, which now features a 24/7 online chat function. Should you have any inquiries, simply click the “Live Chat” button to connect with our team of support specialists who are readily available to assist you. Thank you for choosing Litokam.

Chat with us:

Camera Introduction

Litokam-Cam-S1-Outdoor-Camera-FIG-2

How to Set Up

To set up your Litokam camera, please follow these steps:

Step1 Download “Littlelf Smart” APP , and register an account on APP via Email.
Step2 Power on the camera, and make sure your mobile phone is already connected to WiFi (only 2.4Ghz WiFi is supported)
Step3 Open the “Littlelf Smart” APP, click “+” or “Add Device” button on the home page (Picture 1);
Then click “Cam S1″ (Picture 2) , please check and confirm the camera status then click ” Next” (Picture 3).
Step4 Align the QR code on the phone screen with the camera lens (at a distance of 15-20cm), and upon hearing the “Scan QR code successfully”, click “Hear the beep” (refer to Picture 4).
Step5 5.Wait for the network configuration to complete successfully, and then begin using your camera (refer to Picture 5).

Storage Methods

There are two storage methods available for your convenience:

Cloud storage
You may opt to subscribe to a cloud storage package, which will enable the camera to automatically save videos. Please follow the necessary steps to activate this option.

Micro SD card storage

Alternatively, you may insert a micro SD card and turn on the Record Button to save event recordings

Install the Camera

Install the camera 2-3 meters (7-10 ft) above the ground. This height maximizes the detection range of the Ai detection

Installation Tips

Do not face the camera towards any light sources.
Do not point the camera towards a glass window. Otherwise, it may result in poor image quality because of the window glare caused by infrared LEDs, ambient lights or status lights.
Please do not position the camera in a shaded area and instead aim it towards a well-lit area, as this may lead to subpar image quality. To ensure optimal image q uality, it is advisable to place the camera and the subject being captured in a similar lighting environment.
Make sure the power port is not directly exposed to water or moisture and not blocked by dirt or other elements.
The IP65 weather-resistance camera can work properly under conditions like rain and snow. However, it doesn’t mean the camera can work underwater

Mount the Camera

Twist the camera clockwise onto the bulb base.

NOTE: Use the drywall anchors included in the package if needed.

Frequently Asked Questions

Q1: How do you troubleshoot a security camera?
A: I f your camera’s red light flashes rapidly during connections, it can usually be connected normally. However, if the light is in another abnormal state, please follow these 6 quick tips to fix your security camera troubleshooting:

Try using a different cable and plug if the light is not flashing red.
Update the software and firmware.
Reset the camera to its factory settings.
Check whether the router password (WiFi password, but not app account password) is correct.
Place the camera close to the router and ensure that the network environment has strong and stable signals.
Verify that your device has been added over a Wi-Fi band of 2.4 GHz. Check whether the 2.4 GHz band and 5 GHz band share the same Wi-Fi account. If so, we recommend that you configure two accounts and switch to the 2.4 GHz band during network connection.

Q2: How do I record after inserting the Micro SD card?
A: Please follow these instructions:

Click the “…” icon located in the top right corner of the live video interface.
Click on “Recording Settings”.
Turn on “Local Recording”. The camera will automatically begin recording video.
Select “Recording Mode”, and “Event Recording”. The camera will now automatically record video when motion is detected.
Select “Recording Mode”, and “Non-Stop”. The camera will continue to record video.

Q3: How can I view motion detection videos instead of screenshots?
If you want to watch motion detection videos you will need to use either an Micro SD card or a cloud service, if you are already using one of these, follow these steps to check for motion detection videos：