LIAN LI GA II Uni Fan LCD Firmware User Guide
- June 16, 2024
- LIAN LI
Table of Contents
UNI FAN TL LCD
Firmware Manual
Update Guide
20231222
GA II Uni Fan LCD Firmware
Click here for the Chinese version of the
guide
Please update TL LCD firmware if you are encountering JPG file or rotation
function unable to memory.
Before following this guide, ensure you have updated the controller firmware
(refer to the guide) and downloaded the latest L Connect 3 v2.X.X.
– Make sure that the system is connected to internet
– Update one TL controller at a time, supporting 7 x TL LCD.
- Run L-Connect 3,
box will appear - Click
to go to Settings > Update page 
- Click
- Once the download is complete, click
- Allow the software to run the update; refrain from taking any action during the upload. (Please ignore the negative value. The more TL LCD fans you connect, the value will go higher)
- When update TL LCD FW is done, a message prompting a PC reboot will appear; click
- Before restarting the PC, run L- Connect 3 again to verify that all updates has been applied to v1.4 and update button doesn’t appear.
- If
button is still clickable, repeat step 4. - Ensure that it displays as Version: 1.4 at Settings > Update > TL Series LCD
- Restart your PC, and you can now enjoy smooth control of your TL LCD fans with L Connect 3.
- The
box might still appear; please ignore it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>