Hetoy SX2068 12V Ride on Tractor User Manual

June 16, 2024
Hetoy

Hetoy SX2068 12V Ride on Tractor

Hetoy-SX2068-12V-Ride-on-Tractor-product

PARTS LIST

Hetoy-SX2068-12V-Ride-on-Tractor-fig-1

Disclaimer:
The pictures in this instruction are for assembly reference only. Please refer to the actual product.

Warning:
This product is not the transportation vehicle, it should be used under adult guidance. Parents should ensure that children have taken the safety measures before use. The toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third party.

PRODUCT SPECIFICATIONS

Battery 12V7AH
Main material PP
Suitable age 37-95 months
Weight limit 30kg
Product size Tractor headstock:1116371cm
Packing size Tractor headstock:1075547.5cm
Speed 3-5KM/H
Runtime 1-2 hours after charging for 8-12 hours, based on ride on conditions
Charger Input AC 100-240V Output DC 12V-1.0A
Fuse Auto-reset fuse

Assembly instruction

  • Car assembling should be done by the adults.
  • Take care of small parts. To avoid choking hazard, keep children away while assembling. Children under 36 months are prohibited to use.
  • Please count all the parts carefully before assembling and dispose the plastic bag properly. Children are prohibited from playing.

Battery Connection
Remove the battery cover, connect two red plugs of red wires.Hetoy-SX2068
-12V-Ride-on-Tractor-fig-2

Front Wheel Assembly
Insert the front wheel and small washer to front axle, fix the nut with sleeve tool. Then install the wheel cover.Hetoy-SX2068-12V-Ride-on-Tractor-
fig-3

Rear Wheel Assembly
A. Remove the nut and washer from the rear axle with the sleeve tool. Insert the rear axle to the car body, and make sure the axle length that extends out on both sides are same. B. Insert the motor to the rear axle, connect the plugs of motor and car body. Two motors are different, please distinguish between left and right. C. Insert the rear wheel and washer to the rear axle. Fix the nuts on both sides with the sleeve tool at the same time.Hetoy-
SX2068-12V-Ride-on-Tractor-fig-4

Steering Wheel Assembly
Insert the steering wheel to the steering column on the car body, and press two pins on the steering column, the pins will pop up after installation.

Seat Assembly
Insert the seat with car body and push it into place.Hetoy-SX2068-12V-Ride-
on-Tractor-fig-5

Rear Support Part Assembly
Attach rear support part under car body and fix with two screws.Hetoy-SX2068
-12V-Ride-on-Tractor-fig-6

FUSE

This car has a auto-reset fuse, if the car stops suddenly while driving, it is mainly caused by instantaneous current exceeds,which makes the fuse to trip. Then just stop operating for about 8 seconds, and this fuse can be reset. Then turn on the power switch again.In order to avoid the fuse tripping and cutting off the power supply, please pay attention to the following matters.  This product can’t be overloaded, the maximum load is 30kgs. Don’t drag anything behind the product.  Don’t let the warter or other liquid into the batteries and other electrical components. Don’t change the circuit system and structure of the product.

SECURITY WARNING

  1. The installation and charging of vehicle should be under adult supervision at all times.
  2. This product is limited to the children from 37 to 95 months, 30 kg weight limit.
  3. This product is ideal for driving on a hard flat surface.
  4. It is strictly prohibited in the streets or the road, pot holes, and slopes.
  5. Avoid driving in the sand or grass or uneven ground.
  6. Children should be given full instructions on operation of the car. Improper operation can cause damage or accidents.
  7. While children are driving, parents must supervise at all time to avoid accidents.
  8. Avoid driving in rains or flooded pathways. By doing so it can damage the motor, circuit and other electrical equipments.
  9. Battery charger should be regularly inspected by parents to insure that the wires, plugs, crusts and other components are not damaged. Please stop using if any damage is found, until it is completely restored.
  10. To ensure product life and safety, and avoid damage to the charger, battery or electric circuit, the car must use the default configuration of a dedicated charger and power supply.
  11. Rechargeable batteries should be removed from the toy before charging.
  12. When no use of the product, please cut off the product power, and keep all the switch to the “stop” or “off” position.
  13. The charger provided is not a toy. It is to be kept away from children.
  14. Strictly prohibit using the non-manufacturer-provided parts.
  15. This product is made of PP material mainly, and the safe use time is two years.

USAGE DIRECTION

  1. Before using it, make sure that all the following works are done.
    • Step described in accordance with the instructions to com-plete the installation of the car, the battery plug-in has been connected, the power supply has been switched on.
    • Make sure that all the positions which need the screws are fixed tightly.
    • Parents or guardian should ensure that children have taken the safety measures before using. To reduce the risk during using, pay attention the followings: When driving the car ,child should sit on the car seat. Adult or parents should take more care and guidance when child driving and can’t leave away. Pay attention to the driving environment and driving on the hard flat surface, not the unsafe environment.

For example:

  • The trenches, the riverside, slope or uneven ground;
  • Road or other places for driving and walking;
  • The obstruction which is easily hitting and causing injury;
  • Other unsafe zones.

To avoid accident, please use only in daytime or bright place, avoid using under low visibility.

  1. Operating(function reference diagram)

Hetoy-SX2068-12V-Ride-on-Tractor-fig-7

MP3 Player

Hetoy-SX2068-12V-Ride-on-Tractor-fig-8

Remote control instruction

Hetoy-SX2068-12V-Ride-on-Tractor-fig-9

Remoter Control Instructions

For the first time using, please match the remote control with the car, this product has a memory function, battery replacement does not need to match the code once again.

  1. Long press “code” button more than three seconds, until the first LED lights flashing.
  2. Turn on the power on the car, the first LED light on the remote control turns on indicating the successful pairing with thecar.
  3. When the remote control is not used for a while, it will automaticallyenter a sleep mode, press any key to wake it up.
  4. Key Description: “△” Forward, ” downReverse,   Left, Right,”S” Speed, “P” Stop. Press the “S” key to select the speed, 1 LED indicates low speed, 2 LED indicates medium speed, 3 LED indicates high speed,the car reverse with only medium speed. Press the “P” key, the car will stop immediately, all LED starts flashing, press this button again to release the brake function.

WARNING

  1. When operating the car, the distance between the car which kid sit in and the remote control which operated by adults should not be more than 10 meters.
  2. The remote is only for adults to use, keep far away from child.
  3. Before using the remote, you must read the instruction manual carefully, and operate the empty car first , only when knowing the way of operation, you can use the remote with kid in the car.
  4. Please switch to the “P”of the gear before you get on the car.
  5. This product should not be used on traffic road and the places with water and obstacles.
  6. To Avoid damaging the circuit, please keep the remote control from wet and in the rains.
  7. Don’t mix old and new batteries and different brands of dry batteries.
  8. In order to avoid damaging the remote control, please take out the batteries if not use the remote control for a long time to avoid battery leakage and circuit corrosion.
  9. Avoid dropping the remote control during use.
  10. Install batteries with right polarity to avoid battery short circuits.
  11. Charging must be done by adults. Nonrechargeable batteries can’t be charged.
  12. Exhausted battery should be removed from the toy properly and prevent children from playing.
  13. Take out the battery if no use for long time, properly handle the battery, and prevent children from playing.
  14. If the remote distance is less than 3 meters, it means the batteryis down in the remote control, it is time to change the 2 pieces of AA alkaline batteries.

How to insert batteries: Use screwdriver to loosen the screw on the back of the remote control, open the battery cover, and install two AAA 1.5V alkaline type batteries according to the diagram (Batteries are self- provided), then close the battery cover,and fix with screw.

CHARGING WAY

  • For Safety purpose ,the charging must be done by adults.
  • The first time you use it, please remove the seat, connect two clip locks of red wires, use it only after charging 8-12 hours.
  • Charging socket is locate on the dashboard, please follow the instructions to charge the battery.
  • If the car has slowed down, it needs to be charged by 8-12 hours, maximum 20 hours.
  1. First insert the plug of the charger into the charging port. (The car can not be used.)
  2. Then insert the charger to the power socket.Hetoy-SX2068-12V-Ride-on-Tractor-fig-11

WARNING

  1. The toy is to be assembled by an adult. In unassembled state, it contains potentially hazardous sharp points & small parts, so please keep out of baby’s reach.
  2. CHOCING HAZARD – Small parts.
  3. Not for children under 3 yrs.
  4. Always wear shoes.
  5. RISK OF FIRE. Do not bypass. Replace only with circuit protection device.
  6. Protective equipment should be worn. Not to be used in traffic.

Attention

  • Can only use the charger and battery according to manufacturers regulations.
  • Do not mix old and new or different types of batteries.
  • The battery terminal should not be short circuit.
  • Do not open the battery or charger.
  • Do not reverse the battery.
  • Before charging, please check whether the charger, battery and plug are ok, if you find any broken parts, you must stop using it immediately. And do not use it until it is fully repaired.
  • The battery will be little warm when being charged, it is normal. If not, it may be caused from the short circuit of charger or circuit board.
  • Must use the pressing plate to fix the battery.
  • Run out of battery must be handled by adults, remove the battery which has run out from toys to recycle properly and shall not be arbitrarily discard.
  • If the product is going to be stored unused long time , it must be fully charged, and charge it every 3 months ,so as to make sure the battery life.
  • Charger and Battery are not toys. Keep them away from children.

MAINTENANCE AND SERVICE

  1. Before use, parents should check whether all parts like batteries, charger, wires, plug, outer body and other parts are in good condition, check whether the screws are loose and whether there are potential safety hazards. Any damaged parts founded should be repaired before using.
  2. After using the product for a period of time, use a small amount of lubricating oil to the moving parts to prevent wear and tear of rust. 3, Keep the car away from fire and direct sunlight. Place it stably, not upside down. The car shall be stored indoors or outdoors under cover.
  3. The car should be kept away from hot items, such as stoves or heaters, or the plastic parts will melt. When charging, the car should be kept away from inflammable materials to prevent it from catching fire.
  4. Charge in time after use. Charging should be done by adults. If the product is going to be unused for a long time, it must be fully charged. Charge it every month so as to extend the battery lifespan.
  5. A soft cloth must be used to clean the car. Do not use chemical solvents to clean the plastic parts. Do not use soap or water to clean the car. Driving in rainy or snowy weather, water can damage the motor, battery and circuit system.
  6. When stopping or storing the car, please cut off the power and make sure all switches are in the ‘STOP’ or ‘OFF’ position.
  7. Do not use fuses different from the specifications of this product. 9, Do not change the product structure and circuit system. Maintenance and repair work must be done under the guidance of the professional or technical personnel in place.
  8. Do not use the product for other purposes. Put the battery in the right polarity.
  9. Battery negative short circuit is prohibited. Non-rechargeable batteries cannot be charged.
  10. Rechargeable batteries can only be charged under the supervision of the adult.
  11. Do not mix old and new batteries or different types of batteries. 14, The battery running out of power should be removed from the car properly and not allowed to be played by children.
  12. Disconnect the batteries completely when not in use and do not allow children to play with them.

TROUBLESHOOTING

Issue Answer

Car does not move or power on

| If “power” switch is in OFF position
If the fuse is not functioning properly
If the battery is not connected, check the red and black wires.
If the charger is plugged in, car will not power on. Unplug charger.
If the pedal switch is not functioning properly
If the wheels stuck and cannot move

Car moves slowly

| If the battery is not fully charged. Need to be charged in time
If there is an issue with the wheels
If rider weight exceeds specifications

Battery does not charge

| If the charger is malfunctioning
If the battery lost its capacity
If the charger and battery connection are charged

INFORMATION

  • Manufacture: Pinghu Shuangxi Baby Carrier Manufacture Co. , Ltd.
  • Manufacture Address:No. 183Tongche Road, Xincang Town, Pinghu City, Zhejiang Province, China
  • US Importer: Cascade Toys and Games LLC
  • Importer Address: 14550 Interurban Avenue South, STE A100 Tukwila, WA 98168 US
  • Email: support@palby’s.net

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Hetoy User Manuals

Related Manuals