BELLEZE 014-HG-41892 Bardot Electric Fireplace Entertainment Stand Installation Guide
- June 16, 2024
- BELLEZE
Table of Contents
BELLEZE 014-HG-41892 Bardot Electric Fireplace Entertainment Stand
CONTACT INFO:[email protected]
1-800-682-6376
ITEM NO. 014-HG-41892
The instruction booklet contains IMPORTANT safety information. Please read
it in full and keep it for future reference.
Scan this QR Code to view our online tutorial
Estimated time for assembly:
- Assemble the furniture on an empty carton, carpet, or rug to prevent scratches or damage.
- For safety, please keep pets and children away from the assembly area.
- Ensure the product is fully assembled before use. If you are missing any hardware or products, do not use it until you have restored the missing parts.
- This furniture requires 2 people for assembly.
- Read this instruction manual prior to assembly to familiarize yourself with the various steps. sure that no parts are missing or damaged before assembly. Do not destroy or discard any packaging until you are certain that you have all the necessary parts for assembly.
- Hand tight all hardwares and careful not to over tighten to avoid damaging the product.
- CAUTION
There are small components used in the construction of this product.
Loose items should be kept away from pets and children to avoid a choking hazard.
PACKAGE CONTENTS
| CODE | DESCRIPTION | QTY |
|---|---|---|
| 1 | Top Panel | 1 |
| 2 | Bottom Panel | 1 |
| 3 | Fireplace Extension Panel | 2 |
| 4 | Side Panel | 2 |
| 5 | Left Medial Panel | 1 |
| 6 | Right Medial Panel | 1 |
| 7 | Center Rear Storage Panel | 1 |
| 8 | Center Front Storage Panel | 1 |
| 9 | Side Back Panel | 2 |
| 10 | Center Back Panel | 1 |
| 11 | Storage Shelf Panel | 2 |
| 12 | Cabinet Door | 2 |
Install all hardware perpendicular to the opening.
Installation
Attach threaded stud bolts to the bottom panel (2).
Insert large wood dowels into the side of the bottom panel (2).
Assemble a piece of fireplace extension panel (3) to the bottom panel (2).
Stick protection pads under the bottom panel (2).
Place the bottom panel (2) to its upright position and attach cam bolts.
Insert small wood dowels to the medial panels (5, 6).
Attach cam bolts to the medial panels (5, 6).
Attach corner brace joints on the center front storage panel (8).
Insert wood dowels to the center front and center rear storage panels (7, 8),
then connect the two panels together.
Assemble the center front and center rear storage panels (7, 8) between the
left and right medial panels (5, 6).
Secure the corner brace joints to the left and right medial panels(5, 6).
Assemble the shelf assemblies on top of the bottom panel (2).
Insert wood dowels to the side panels (4).
Assemble side panels (4) on top of the bottom panel (2).
15 Slide in the side back panels (9) to the back of the assembly.
16 Slide in the center back panel (10).
17 Attach threaded stud bolts to the top panel (1).
18 Insert wood dowels to the side of the top panel (1).
Assemble the fireplace estension pael (3) to the top panel (1.)
Attach cam bolts to the underside of the top panel (1).
Assemble the top panel (1) on top of the shelf.
Secure the back panels in place.
Assemble door hinges to the cabinet doors (12).
Assemble the door handle to the cabinet doors.
Assemble the cabinet doors to the stand
Insert shelf pegs inside the stand and put on the storage shelf panels (11).
Remove screws from the back of your fireplace.
Slide the fireplace into the stand from behind. make sure the fireplace is centered inside the stand.
Secure the fireplace to the stand by installing 2 L-shaped corner braces to the back of the fireplace.
Attach anti-tipping straps behind the stand.
Affix the stand to a wall.
Furniture must permanently fixed to the wall stud with included anti-tipping device to prevent the furniture from tipping over.
- Mark the drill position on the wall with a pencil.
- Drill a small hole on the marked position.
- Insert a wall anchor into the drilled hole.
- Fixed the anti-tipping strap to the wall with provided screws.
Warning
-
Only place items on top of the product if they meet the recommended size and weight limits.
-
Climbing on, stepping on, or placing overweighted objects on the product may cause property damage and/or injuries.
-
Items placed onto this product must be resting on a support surface without hanging over the edges.
-
Serious or fatal crushing injuries may occur if the furniture tip-over.
Furniture must permanently affixed to the wall with included anti-tipping device in order to prevent the furniture from tipping over. -
Different wall materials requires different types of wall anchors or screws. Use a suitable wall anchors or screws for your specific wall in order to secure the stability and load bearing capacity of the furniture. If you are uncertain about which type of device to use, please contact us or your local hardware store.
WARNING
- For use with televisions weighing 70lbs (31.75kg) or less. Use with heavier televisions may result in instability, causing tip over resulting in death or serious injury.
- Relocating audio and/or video equipment to furniture not specifically designed to support audio and/or video equipment may result in death or serious injury due to the furnishing collapsing or over turning onto a child.
NOTICE The recommended maximum width of the TV is 65 inches. Do not exceed the maximum load capacity This product is designed for flat panel TVs only.
Thank you for your purchase. We want your item to last as long as possible.
To ensure the product gives you years of longevity, please follow the
recommendations in this care and maintenance guide.
MAINTENANCE
- Tighten all bolts and screws again within the first 2 weeks of assembly.
- Check the tightness of all bolts every 2 months and tighten them if necessary.
CLEANING
- Clean the surface of the MDF (medium-density fiberboard) with a lightly dampened cloth.
- A small amount of mild soap can be used if necessary.
- Dry the surface immediately after cleaning.
- DO NOT use bleach or alcohol to clean the surface.
- DO NOT apply wood treatment on parts made with MDF.
MDF will swell and distort when exposed to water damage. Make sure to dry the furniture immediately after cleaning.
WARNING
The manufacturer and seller are not responsible for any and all liability
relating to personal injury, property damage or losses, whether direct,
indirect, or incidental, resulting from the incorrect attachment, improper
use, inadequate maintenance, unapproved modification or neglect of this
product.
WARRANTY
BELLEZE products come with a 1-year warranty from the date of delivery.
Register your product on our website to enjoy our limited lifetime warranty!
Contact us at 1-800-682-6376 or email us at [email protected]