CMS Electracom 2x Power Modules 1000mm Lead Instruction Manual
- June 16, 2024
- CMS Electracom
Table of Contents
CMS Electracom 2x Power Modules 1000mm Lead Instruction Manual
POP UP IN DESK UNIT
-
CUT OUT
Determine desired orientation of product and cut hole. -
INSERT PRODUCT
Fold clamps into provision within housing. Align housing in the cut out and insert housing into desk. -
TIGHTEN SCREWS
Screw through the plastic housing and clamps so that they rotate out of the housing. Tighten screws until the assembly clamps down and is secure. The clamps will grip into underside of desk. DO NOT OVER TIGHTEN TIGHTEN BY HAND ONLY -
CLIP ON COVER
Align clips on the underside of the cover with provisions in housing. Secure the top cover and push down above where the clips are positioned. -
CONNECT TO POWER
Plug into power source
Available Power Outlets
AUSTRALIA | NEW ZEALAND | ASIA-PACIFIC | UNITED KINGDOM | UNITED STATES | WWW.CMSELECTRA.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>