CMS Electracom CM-YCD02-01 Solar Pool Light User Manual
- June 16, 2024
- CMS Electracom
Table of Contents
Solar Pool Light
(Model:CM-YCD02-01)
Pool Light Specifications:
Material: ABS+PC
Dimensions:7.361 Inches
Luminance :60 LM
Waterproof: IP68
Control Type: Remote Controls
Color Temperature: RGB-White
Solar Panel Specifications:
Solar Panel Type: Monocrystal Silicon Solar Panel
Dimensions:7.4*5 Inches
Solar Photovoltaic Power: 3.5W
Controller Output Power: 1.5W
Battery Capacity: 4000mAh(18650 Battery )
Output Voltages: 4.1V
Output Current: 400MA
Charge Time: 5-6Hours
Work Time: 8-10Hours
Packages Include:
(The items included in the package depend on the pack you purchase.)
Pool Light Specifications:
Installation Methods:
Lamps can be magnetized directly, or used with special glue.
Installation Notes:
Use special glue to stick the magnetic mounting plate onto the swimming pool
wall. Wait for 5 minutes, then clip the light onto the magnetic mounting
plate. Make sure to align the groove on the light with the protrusion on the
magnetic mounting plate to ensure
a secure connection.
Getting Started
- After the installation is completed, first press the ON/OFF button on the solar panel.
- Unplug the plastic tabs from the remote control and you’re ready to go!
- You can also directly on the solar panel to switch the mode and color temperature.
Note:
When the weather is cloudy and rainy, you can directly use the type-C port for
charging
Remote Control Functions
Picture | Number | Functions |
---|
| 1| Turn OFF
2| 2 hours timer
3| 4 hours timer
4| 6 hours timer
5| 8 hours timer
6| Red
7| Green
8| Orange
9| Yellow
10| Purple
11| White
12| Breath
13| Flash
14| Color Cycle Breath
15| Turn ON
16| Speed Up| 20| Auto
17| Speed Down| 21| Fade
18| Blue| 22| Color Cycle Fade
19| Pink| 23| Color Cycle Flash
Product Suggestions:
Different sizes of pools with different numbers of pool lights to achieve the best use of results Recommended Scenarios: Above Ground Pool
Pool size | Recommended lights | 21n1 |
---|---|---|
8′ | 1set | 1 |
10′ | 2set | 2 |
12′ | 2set | 2 |
15′ | 2set | 2 |
18′ | 4set | 4 |
Tips About Pool Light:
- This product is recommended to use a depth of not more than 1M.
- This product can be used in outdoor swimming pools, simple swimming pools, fish tanks that are easy to place this product, park pools, or aquariums. However, it is not suitable for sauna pools, hot tubs, and other pools with high water temperatures.
- Don’t pull the cable, or shake the lamp head, drop it, and do other actions that affect the waterproof performance.
- When not in use for a long time, please remove the product from water and store it in a cool and dry place.
- The lamp head part should not be exposed to the sun for a long time.
- The solar controller part should not be immersed in water
- Contains small parts, avoid swallowing by children, please store it out of their reach.
- There is a risk of waterproof failure if the product is disassembled privately.
After-sales Service Guarantee
A 12-month warranty is provided for this product from the date of purchase. If
you have any questions during the warranty period, please feel free to email
us at support@asokoled.com or contact us
directly on Amazon with the order ID and relevant images attached.
Warning:
This device complies with part 15 of the FCC Rules. Operation is subject tothe
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the partyresponsible for
compliance could void the user’s authority to operate theequipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used inaccor dance with the instructions, may
cause harmful interference to radio communications. installation. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception,which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit differentfrom that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Manufacturer : Shenzhen CMS Optoelectronics Technology Co., Ltd.
Address : 301-201, Building 1, No.8 Yanshan Avenue, Yanchuan Community,
Yanluo Street, Baoan District, Shenzhen
Company sales service :
Email: support@asokoled.com
Tel: 888-886-9874
Avalibale Time:Mon-Fri 9AM-5PM(PST)