CMS Electracom EL04UAA Series Elevate Curly Cord Retractor Instruction Manual
- June 4, 2024
- CMS Electracom
Table of Contents
CMS Electracom EL04UAA Series Elevate Curly Cord Retractor Instruction
Manual
WARNING
This product must only be installed by a qualified electrician.
Disconnect power supply before removing the cover, connecting or disconnecting
the product
Installation instructions
Step 1. Fasten the eye-bolt into the ceiling and loop and crimp the
supplied SS cable around the eye-bolt.
Step 2. Measure distance from eye-bolt to the desired height for the
retractor module. Once decided, loop and crimp SS cable to the retractor
module.
Note A: The retractor has approx. 1500mm lead-length to use the Elevate
power module.
Note B: To adjust the resistance of the retractor, turn the adjuster
clockwise to increase, and anti-clockwise to decrease to suit weight of
Elevate unit.
Step 3. Fasten the clip from the retractor cord to the elevate module.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>