MEAN WELL XBG-160 series 160W Constant Power Mode LED Driver Owner’s Manual

XBG-160 series 160W Constant Power Mode LED Driver
Owner’s Manual

XBG-160 series 160W Constant Power Mode LED Driver

http://www.meanwell.com.cn/Upload/PDF/LED_EN.pdf

 Features

• Full power output at 70~100% constant power mode operation
• Wide input range 90 ~ 305VAC with active PFC function
• Metal housing design with IP67
• Function options: output adjustable via potentiometer; 3 in 1 dimming (dim-to-off and Isolation design)
• Typical lifetime>50000 hours and 5 years warranty
• AC input cable with connector for flexible application

 Applications

• LED bay lighting
•  LED stage lighting
• LED spot lighting
• Explosion-proof lighting
•  Type HL LED driver for class | division 2

GTIN CODE
MW Search: https.www.meanwell.com’serviceGTIN.aspx
Description
XBG-160 series is a 160W AC/DC LED driver featuring the constant power mode. XBG-160 operates from 90~305VAC and offers with different rated current ranging between 2850mA and 4100mA. Thanks to the high efficiency up to 93%, with the fanless design, the entire series is able to operate for -40°C~+90°C case temperature under free air convection. The design of metal housing and IP67 ingress protection level allows this series to fit both indoor and outdoor applications. Moreover the innovative environment-adaptive capability allows this series to reliably light on the LEDs for all kinds of application environments in almost any spots that may install LED luminaires in the world. XBG-160 series comply with the latest version of IEC61347/GB7000.1-2015 and UL8750 international safety regulations. The output and dimming circuit are also completely in accordance with the new regulations with isolation to ensure the safety of both users and luminaire system during installation.
Model Encoding

SPECIFICATION

(Please refer to “STATIC CHARACTERISTIC” section)
FREQUENCY RANGE| 47 – 63Hz
POWER FACTOR (Typ.)| PF a 0.97 /115VAC, PF :a 0.95 / 230VAC, PF a 0.92 / 27NAC at full bad (Please refer to “Power Factor Chwacteristic” section)
TOTAL HARMONIC DISTORTION| THD< 10% (@ load a60% at 115VAC/230VAC Aload a 75% at 27NAC) Please refer to “TOTAL HARMONIC DISTORTION (TH Dr section
EFFICIENCY (Typ.)| 93%
AC CURRENT (Typ.)| 2.0A /115VAC 0.8A / 230VAC 0.7A / 277VAC
INRUSH CURR EN T(Typ.)| COLD START 50A(bvidb=620/4 measured at 50% !peak) at 230VAC; Per NEMA410
MAX. NO. of PSUs on 16A CIRCUIT BREAKER| 4 init(circuit breaker of type B) 1 7 units(cittit breaker of type C) at 230VAC
LEAKAGE CURRENT| <0.75mA / 277VAC
NO LOAD /STANDBY POWER CONSUMPTION| No bad power constimption<0.5W for A-Type Standby power consult ption<0.5W for AB-Type
PROTECTION| OVER CURRENT| 95 – 108%
Constant current limiting, recovers automatic al y af ter fault condition is removed
SHORT CIRCUIT| Hicctp mode, recovers automatical y after fault cond lion is removed
OVER VOLTAGE| 61 – 78V
Shut down outputvoltage, re-power on to recovery
OVER TEMPERATURE| Shut down outputvoltage, re-poweron to recovery
BNPONMENT| WORKING TEMP.| Tcase=-40 – +90 C (Please refer to “OUTPUT LOAD vs TEMPERATURE” sectidn)
MAX. CASE TEMP.| Tcase=+90 C
WORKING HUMIDITY| 20 – 95% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 – +80C .10 -95% RH non-condensing
TEMP. COEFFICIENT| ±0.03%/ C (0 -60 C)
VIBRATION| 10 – 500Hz, 5G 12m:tricycle, period for 72min. each along X, Y. Z axes
SA FETY 8 EMC| SAFETY STANDARDS| UL8750(type”HL”),CSA C22.2 No. 250.13-12; E NEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384; IS15885(Part2/Sec13);GB19510.1,GB19510.14:1P67;EAC TP TC 004 approved
WITHSTAND VOLTAGE| I/P-0/P:3.75KVAC I/ P-FG:2KVAC 0/P-FG:1.5KVAC
ISOLATION RESISTANCE| IfP-0/P, UP-FG, 0/P-FG:10061 Ohms / 500VDC/ 25C/ 70% RH
EMC DASSION| Parameter| Standard| Test LevellNote
Conducted| BS EN/EN55015(CISPRI5)| —-
Radiated| BS EN/EN55015(CISPR15)| —-
Harmonic Current| BS EN/EN61000-3-2| Class C A badz50%
Voltage Flicker| BS EWEN61000-3-3| —-
EMC IMMUNITY| 8S EN1EN55024 . BS EN/ EN61204-3, BS EN/ EN61000-6-2
Parameter| Standard| Test Level/Note
ESD| BS EN/EN61000-4-2| Level 3, 8KV air : Level 2, 4KV conlact
Radiated| BS EN/EN61000-4-3| Level 3
EFT/Burst| BS EN/EN61000-4-4| Level 3
Surge| BS EN/EN61000-4-5| 4KV/Line-Line 6KV/Line-Earti
Conducted| BS EN/EN61000-4-6| Level 3
Magnetic Field| BS EN/EN61000.4-8| Level 4
Voltage Dips and Interruptions| BS EN/EN61000-4-11| >95% rip OS peaxls, 30% rip 25 periods, >95% interrtplicins 250 periods
OTHERS| MTBF| 3173.6K trs mit Teloacia SR-332(Bellcore); 282.4K hrs nit MIL- HDBK-217F (25C)
LIFETIME Note.5| 50000 hrs mb.
DIMENSION| p 151.5m m “60mm(D’H)
PACKING| 1.25Kg: 8pcs/11.5K9/0.93CU FT

NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25°C of ambient temperature.
2.  De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC’ sections for details.
3. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
4. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
5. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 70°C or less.
6. To fulfill requirements of the latest ErP regulation for lighting fixture, this LED drive can only be used behind a switch without permanently connected to the mains.
7.  Please refer to the warranty statement on MEAN WELL’s website at http://Awww.meanwell.com
8. The ambient temperature derating of 3.5°C /1000m with fanless models and of 5°C /1000m with fan models for operating altitude higher than 2000m(6500ft).
9. Products sourced from the Americas regions may not have the PSE/CCC/BISMKC logo. Please contact your MEAN WELL sales for more information.
10.  For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.comUpload/PDF/LEDEN.pdf 

Product Liability Disclaimer : For detailed information, please refer to https://wwww.meanwell.com/serviceDisclaimer.aspx
BLOCK DIAGRAM

DRIVING METHODS OF LED MODULE
※ I-V Operat i ng Area
◎ XBG-160 DIMMING OPERATION ※ 3 in 1 dimming function (for AB-Type)

• Output constant current level can be adjusted by app lying one of the three methodo logies between DIM+ and DIM-:
• 0 ~ 10VDC, or 10V PWM signal or res i stance.
• Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
• Dimming source current from power supply: 100 A (typ.)μ

◎ App lying additive 0 ~ 10VDC
Note :

1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%.
2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% dutycycle.

OUTPUT LOAD vs TEMPERATURE

TOTAL HARMONIC DISTORTION (THD)

•

EFFICIENCY vs LOAD
XBG-160 series possess superior working efficiency that up to 93% can be reached in field applications.
※2850mA Model, Tcase at 652850mA ℃ LIFE TIME

MECHANICAL SPECIFICATION
※ A-Type(AC input with fixed cable)

• Ta : Ambient Temperature measured point
•  Max. Case Temperature.(case temperature measured point)

※ A-C-Type(AC input with connector)Terminal Pin No. Assignment(CHOGORI 22003515-01)

• Ta : Ambient Temperature measured point
• Max. Case Temperature.(case temperature measured point)

AC input cable is optional , needs extra charge

INSTALLATIONS

• Please inspect the appearance of the driver if the package is damaged. There should not be any cracks.
• Please do not drop or bump the driver.
•  All screws including the suspension screw should be paired with a spring washer and locked tight.
• he entire luminaire, including the driver, should be limited to 10Kg or less.
•  The luminaire should be cautiously protected from damage due to shock throughout packaging and transportation.
•  Please thoroughly follow the preceding cautionary notes to prevent the luminaire from falling, leading to injuries.

INSTALLATION MANUAL

Please refer to: http://www.meanwell.com/manul.html

Downloaded from Arrow.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>