KOHLER K-35022 Studio McGee 60 Bathroom Vanity Cabinet User Guide
- June 16, 2024
- Kohler
Table of Contents
Malin™ by Studio McGee
60″ bathroom vanity cabinet with sinks and quartz top
K-35022 User Guide
Features
- Designed in collaboration with Studio McGee
- Set includes cabinet, precut quartz vanity top, backsplash, sinks, cabinet hardware
- Full-extension 17″ (432 mm) drawers with soft-close undermount slides
- Removable dividers in top drawers to personalize drawer organization
- Three-way adjustable slow-close door hinges for easy cabinet access
- 20-7/16″ (519 mm) cabinet interior provides ample storage space
- Finish-matched cabinet interior offers generous clearance for plumbing
- Two internal electrical outlets and two USB ports for powering small devices
- Two stainless steel storage holders for hairdryers, curling irons, or accessories
- Vanity top has 8″ (203 mm) widespread faucet holes; requires deck-mount faucets (sold separately)
- Vibrant® Brushed Moderne Brass hardware is included on White Oak vanities and Vibrant Polished Nickel hardware on White vanities. Additional hardware finishes are available (sold separately)
Material
- Quartz vanity top adds beauty and long-lasting durability
- Vitreous china sinks
- Solid and composite wood
Installation
- Easy installation ± no special tools required
- Sinks preinstalled on vanity top to simplify installation
Codes/Standards
ASME A112.19.2/CSA B45.1
KOHLER® One-Year Limited Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
| Color | Code | Description |
|---|---|---|
| 0 | White | |
| SWK | White Oak |
Required Electrical Service
One circuit required.
Outlet: 120 V, 12 A, 60 Hz
Technical Information
All product dimensions are nominal.
Charge voltage: USB 5 V
Electrical component Outlet: 120 V, 12 A, 60 Hz
rating:
Notes
Install this product according to the installation instructions.
Select the type of fastener based upon the wall material. Two 250 lb (113.4
kg) minimum load bearing fasteners are recommended with a lag bolt of length
to clear obstacles in the wall and 5/16″ washers. Calculate the proper lag
bolt length by adding the 1-1/2″ (38 mm) backing material, plus the wallboard
thickness, plus the back rail thickness.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to
www.kohler.com.
12-19-2023 23:00 – US/CA/MX
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>