PFL Pet Water Fountain User Manual
- June 16, 2024
- PFL
Table of Contents
PFL Pet Water Fountain User Manual
Accessories include
Before using, please make sure that the package includes the following components. If any part is missing, please contact our customer service.
-
1 *Water Bowl
-
1 *Bowl Lid
-
1 *Faucet
-
1 *Power Cable+Adapter
-
1 *Water Pump
-
2 *Filter Cartridge
-
2 *Water Pump Filter Cotton
-
1 *Water Pump Cleaning Brush
| Product Material | ABS |
|---|---|
| Maximum Capacity | 6L |
| Product Weight | 2.6510.2 kg |
| Dimensions | 13×11.8×5.5 inches/33x30x14cm |
| Input Voltage | 100-240V, 50/60Hz |
| Output Voltage | 5.0V, 1.0A |
| Filter Materials | Cotton + Activated Carbon+ Cation Exchange Resin |
Warm Tips
- The optimal water temperature is 0-40°C/32-104°F.
- Do not put the product and its parts in the dishwasher for cleaning.
Installation Instructions
Please follow the steps below for initial setup.
-
Before installation, soak the filter in clean water for approximately 5-10 minutes.
-
Put in the filter element.
-
Place the pump in the designated position at the bottom of the bowl. Ensure that the cable is closest to the rear hole of the bowl. Press down on the pump to engage the suction cups.
-
Align the faucet to install the cover.
-
Fill the water bowl with clean water, ensuring that the water level is within the MIN-MAX range. (Water temperature: 0-40°C/32-104°F)
-
Install the bowl lid onto the water bowl.
-
Connect the USB interface of the water pump to the adapter and plug it into the socket.
-
The red light on the water pump indicates a water shortage, while the blue light indicates normal operation.
Cleaning and Maintenance
-
It is recommended to clean once a week.
-
Do not put the product and its components in the dishwasher for cleaning.
-
It is recommended to replace the filter every 15-30 days.
Pump Cleaning
-
Disassemble the shell on the side of the pump filter
-
Use a tool to pry the pump cover open and take it out.
-
Use a tool to clamp the pump blades and pull them out
-
Clean the parts with a cleaning brush.
-
Assemble in sequence after cleaning.
Note: Make sure to follow the instructions provided.
Unhappy
Please don’t be mad and give us a chance to solve the problems for you of the
product.
We will provide you with a 100% satisfactory solution.
Problems may happen:
- Stopped working
- Quality problems
- Product instruction is not clear enough
- Other problems…
Solutions we offer:
- Online customer service within 24 hours during weekday
- Get a replacement or money back
- Clear product instructions
- 1-YEARS warranty
If you have any problems with the item. Please email us of the issue, we will solve the problem for you.
Contact us!
via Amazon
(281)236-9255
Pick for Life
Scan the QR code to contact us
Documents / Resources
| PFL
Pet Water
Fountain
[pdf] User Manual
Pet Water Fountain, Pet, Water Fountain, Fountain
---|---