Intelbras LSPM1FANSB-SN Fan Trays Instruction Manual
- June 16, 2024
- intelbras
Table of Contents
Intelbras LSPM1FANSB-SN Fan Trays
Product Information
Specifications:
- Fans: Yes
- Airflow direction: Power module side to port side (LSPM1FANSA-SN), Port side to power module side (LSPM1FANSB-SN)
- Max fan speed: Not specified
- Max airflow: Not specified
- Max power consumption: Not specified
- Voltage: Not specified
- Operating temperature: Not specified
- Operating humidity: Not specified
- Storage temperature: Not specified
- Storage humidity: Not specified
Overview:
The Intelbras LSPM1FANSA-SN and LSPM1FANSB-SN Fan Trays are small-sized
trays that provide fast heat dissipation and hot swapping. They are asset
manageable and can adjust the fan speed automatically. The LSPM1FANSA-SN fan
tray provides airflow from the power module side to the port side, while the
LSPM1FANSB-SN fan tray provides airflow from the port side to the power module
side. Both fan trays are available in black and silver models, with silver
models supporting electronic labels.
Views:
The LSPM1FANSA-SN fan tray has a handle (blue) with a status LED, and the
LSPM1FANSB-SN fan tray has a handle (red) with a status LED. When installing
the fan tray, make sure the TOP sign is on the top surface. The description
for the status LED may vary by device model. For more information, refer to
the installation guide for your specific device.
Product Usage Instruction
Safety Precautions:
Before installing or removing a fan tray, ensure the following safety
precautions:
- Turn off the power to the device.
- Ensure proper grounding to prevent electrostatic discharge.
- Handle the fan tray with care to avoid any physical damage.
Installing a Fan Tray:
- Orient the fan tray with the TOP sign on the top surface.
- Holding the handles of the fan tray, insert it slowly into the slot along the guide rails.
- Ensure the fan tray has good contact with the backplane.
Removing a Fan Tray:
- Hold tightly onto the fan tray handles.
- Pull the fan tray slowly out of the slot along the guide rails.
Compatible Products:
- SC 5525-48X-6H
- SC 5525-24X-6H
- SC 5530 Series
Frequently Asked Questions (FAQ)
-
Q: What is the maximum fan speed?
A: The maximum fan speed is not specified in the user manual. Please refer to the product specifications for more information. -
Q: What is the operating temperature and humidity range?
A: The user manual does not provide specific operating temperature and humidity ranges. Please refer to the product specifications for detailed information. -
Q: Can the fan trays be hot swapped?
A: Yes, the fan trays support hot swapping.
Overview
About the Fan Tray
The LSPM1FANSA SN fan tray provides airflow from the power module side to the
port side. The LSPM1FANSB SN fan tray provides airflow from the port side to
the power module side. The two fan trays feature small size, fast heat
dissipation, and hot swapping. They can adjust the fan speed automatically.
Both Fan Trays are asset manageable.
Views
Both the LSPM1FANSA SN and LSPM1FANSB SN fan trays are available in black and
silver models. Silver models support electronic labels and black models do not
.
When you install a fan tray, make sure the “TOP” sign is on the top surface of the fan tray. The description for the status LED on the LSPM1FANSA SN or LSPM1FANSB SN fan tray might vary by device model.
Specifications
| Item | Specification |
|---|---|
| Fans | One 40 × 28 × 40 mm (1.57 × 1.10 × 1.57 in) fan |
| Airflow direction | LSPM1FANSA-SN: From the power module side to the port |
side.
LSPM1FANSB-SN: From the port side to the power module side.
Max fan speed| 20000 R.P.M
Max airflow| 20 CFM
Max power consumption| 9.8 W
Voltage| 12 V
Operating temperature| 0°C to 45°C (32°F to 113°F)
Operating humidity| 5% to 95% (non-condensing)
Storage temperature| –40°C to +75°C (–40°F to +167°F)
Storage humidity| 5% to 95% (non-condensing)
Installing or removing a fan tray
The installation and removal procedures are the same for the LSPM1FANSA SN and LSPM1FANSB SN fan trays.
Safety precautions
- Before you install or remove a fan tray, wear an ESD wrist strap and make sure the wrist strap has good skin contact and is reliably grounded.
- Do not touch any bare wire or terminal.
- Do not place the fan tray in a damp environment and prevent liquid from flowing into the fan tray.
- When an internal circuit or component is faulty, do not remove any components from the fan tray. Contact Intelbras Support.
Installing a fan tray
- Before you install a fan tray, make sure the fan tray model is compatible with the device and the airflow direction is as required by the installation site.
- To avoid damaging the connectors on the backplane, insert the fan tray slowly. If you encounter a resistance or the fan tray tilts, remove the fan tray and reinsert it.
Orient the fan tray with the “TOP” sign on the top surface of the fan tray. Holding the handles of the fan tray as shown in the Figure, insert the fan tray slowly into the slot along the guide rails until the fan tray has good contact with the backplane
Removing a fan tray
- Ensure electricity safety when you remove a fan tray on an operating device.
- Never touch the rotating fans on an operating device.
- To avoid disturbing the dynamic balance of the fans and large Noise caused by the imbalance, Intelbras recommends that you do not touch the fans and rotation axis even if the fans stop rotating.
- Place the removed fan tray in an anti-static mat or bag.
Hold tightly the fan tray handles as shown in the figure and pull the fan tray
slowly out of the slot along the guide rails.
Compatible with: SC 5525-48X-6H and SC 5525-24X-6H and SC 55 3 0 Series.