Inovelli VZM36 Blue Series Smart Fan Light Canopy Module Instructions

: June 16, 2024
: inovelli

Inovelli VZM36 Blue Series Smart Fan Light Canopy Module

Inovelli VZM36 Blue Series Smart Fan Light Canopy
Module

Next Gen Smart Lighting

We’re excited to have you on this journey with us and we’re here for you every step of the way. Not only are we smart home owners ourselves, but we build all of our products alongside 1,000’s of passionate community members. To see how the project came to life and how everyone contributed, please see Page 38 or visit: inov.li/cheryl. It’s truly amazing working with people of all walks of life and even more humbling to see everyone’s dedication to making some of the best smart home products.
Thank you so much for your trust in us and welcome to the next generation of smart lighting with Inovelli.
Eric H. – Founder/CEO
Eric M. – Founder/CTO

Scan for the most recent instructions or visit: inov.li/vzm3

Navigating this Manual

We designed this manual as if we were installing the module ourselves. We suggest reviewing the full manual before beginning the installation process. There are four areas this manual covers:

Getting to know your module
Figuring out your wiring
Connecting to your hub/gateway
Configuring your module (optimize the settings)

As we continue to work with hub manufacturers, and improve our products. It may be necessary to periodically update this manual. You can always find the latest version of this manual by visiting: inov.li/vzm36

Quick Setup Notes

We get it, you’re ready to go. No need to flip through the manual, you want the abridged version. This section assumes you have your module wired correctly and the blue LED is lit up.
It also assumes you know how to enter the Zigbee pairing mode on your hub/gateway (and have a Zigbee compatible hub/gateway). To see which hubs are compatible, please visit: inov.li/vzm36hubs While these instructions likely won’t change, for the most up-to date instructions, we recommend scanning the QR code to the right or to visit: inov.li/vzm36QS

Pairing Your Module

Auto-Pairing: The module will automatically start pairing when power is restored. To indicate the module is in pairing mode, the LED Indicator (B) will pulse blue. If the LED Indicator (B) is not pulsing, press the pairing button (A) three (3) times. Start the Zigbee pairing process on the hub at any time. If successful, the LED Indicator (B) will turn green.
If the module is unsuccessful in pairing, please hold down on the pairing button (A) for approximately 20 seconds until the LED Indicator (B) flashes/turns red. Let go and the LED Indicator (B) should start pulsing blue indicating the pairing process has started.

Getting to Know Your Module

Please use the next couple pages to get to know your smart module.
A. Pairing Button: Used to pair your module to your Zigbee Hub or to factory reset the module.
B. LED Indicator: Shows the various statuses of the module (ie: whether pairing mode was successful or not, whether the module was successfully removed or not, etc).
C. Zigbee Antenna: Used to communicate with your Zigbee enabled smart hub. Please ensure this is not covered by anything behind the canopy.
D. Line & Neutral Wires: The black wire is your line/ load wire (used to power the device) whereas the white wire is your neutral wire.
E. Fan & Light Wires: The red wire is the fan motor wire whereas the blue wire is the light wire.

Quick Tap Sequences

have a hub. If you don’t, then use this chart to put your module into On/Off or Dimming Mode (for lights) or Exhaust or Ceiling Fan Mode (for fans).

Mode	Sequence	Confirmation
Dimmer	Hold Pairing Button for 5 seconds (until Yellow), then tap Pairing
Button 3x	Orange
On/Off	Hold Pairing Button for 5 seconds (until Yellow), then tap Pairing
Button 5x	Red
Ceiling Fan (3-Speed)	Hold Pairing Button for 5 seconds (until Yellow), then
tap Pairing Button 7x	Orange
Exhaust Fan (On/Off)	Hold Pairig Button for 5 seconds (until Yellow), then
tap Pairing Button 9x	Red

Wiring Notes

Due to the number of ways these modules can be wired, all schematics are housed online and you can access the schematics by scanning the QR Code at the bottom right, or by visiting: inov.li/vzm36wiring
To work your way through this section, first read the warnings, then familiarize yourself with the vernacular used and then make your way to installing the actual module.
Finally, please do not attempt to install these modules if you are unfamiliar with electrical as serious injury can occur.

Safety Reminder

Consult a qualified electrician if necessary as we are unable to give wiring advice outside of schematics.
If you are unsure how electrical circuits work, please do not try installing this device. As exciting as it is to have a smart module installed, it can be dangerous and even life-threatening if you do not install it correctly. Improper installation will void the product’s warranty.
Please read through the warnings on the next few pages before installing your module. We can’t stress enough how dangerous installation can be if you don’t know what you’re doing.

Warnings

Caution – Please Read: This device (VZM36) is intended for installation in accordance with the National Electric Code and local regulations in the United States, or the Canadian Electrical Code and local regulations in Canada. If you are unsure or uncomfortable about performing this installation consult a qualified electrician. This product is made for indoor use only and is not designed or approved for use on power lines other than 120VAC, 60Hz, single phase. Attempting to use this VZM36 on nonapproved power lines may have hazardous consequences.
Other Warnings: Risk of Fire, Electrical Shock & Burns

Recommended Installation Practices: Use only indoors or in an outdoor rated box. Turn off the circuit breaker. Installing this module with the power on will expose you to dangerous voltages.
Connect only copper or copper-clad wire to the module. To reduce the risk of overheating and possible damage to other equipment, use the VZM36 load output to control no more than indicated on Page 36.
Medical Equipment: Please do not use this switch to control medical or life- sustaining equipment. Zigbee devices should never be used to control the on or off of medical and/or life-sustaining equipment.

To install your Fan Module (VZM36), you’ll need to identify the following four wires:

Line: Usually black and can also be called the, “hot” or “live” and carries 120VAC electricity into the electrical box
Neutral: Usually white and is commonly daisy chained from box to box, usually appearing as a white wire bundle.
Fan (Motor): Usually red and will come from your fan
Light: Usually blue and will come from your fan
Ground: Bare copper wire or metal fixture (if grounded

If you are having difficulties identifying wires, please consult an electrician.

Module Installation

The last step is to physically install your module. As noted in the beginning of this section, there are many different ways your module can be wired that if we posted them here, we’d have an encyclopedia of a manual, so all of our schematics are housed online and can be found here: inov.li/vzm36wiring

Hub/Gateway Setup Notes

As manufacturers update their hub/gateway platforms, the setup process may change. We recommend checking our website for the latest directions, by scanning the relvant QR code.

If you don’t see your hub, please go to: inov.li/vzm36OT

SmartThings

inov.li/vzm36ST
Home Asst. ZHA

inov.li/vzm36ZHA
Home Asst. Zigbee2mqtt

inov.li/vzm36Z2M
Hubitat

inov.li/vzm36HE

SmartThings Instructions

COMPATIBLE HUBS: Samsung SmartThings Hub V1, V2 and Samsung or Aeotec Hub V3 (NOTE: You will need to install an Edge Driver to ensure full functionality of the module. For more info, please go to: inov.li/vzm36STPrereqs).

First, Follow the directions on page 7 to put the module in pairing mode. When the LED Indicator (B) is pulsing blue proceed:

Open the SmartThings app and click on the devices icon
Tap on the (+) button and click, “Add Device”
Under the, “Scan for nearby devices”, click, “Scan” and your hub will search, find and initialize the device
If successful, the LED Indicator (B) will turn green and your app will show the new module (feel free to rename it)

Home Assistant Instructions

COMPATIBILITY: We recommend either ZHA or Zigbee2mqtt (NOTE: you will also need a compatible Zigbee stick – a full list can be found here: ZHA = inov.li/vzm36ZHAsticks or Z2M = inov.li/vzm36Z2Msticks).
You didn’t think we’d be able to fit the HA instructions in here, did you?! Please visit our website 🙂

ZHA Instructions

inov.li/vzm36ZHA
Zigbee2mqtt Instructions

inov.li/vzm36Z2M

Hubitat Instructions

COMPATIBLE HUBS: Hubitat C3, C4, C5, C7 & C8 (NOTE: You will need to install a Device Driver to ensure full functionality of the module. We recommend doing this prior to pairing. For more info, please go to: inov.li/vzm36HEPrereqs).

First, Follow the directions on page 7 to put the module in pairing mode. When the LED Indicator (B) is pulsing blue proceed:

Login to your Hubitat portal and click on the devices tab
Tap on the (+) Add Device button and click, “Zigbee” under, “Add device manually”
Click, “Start Zigbee Pairing” and your hub should go into pairing mode, find and initialize the device
If successful, the LED Indicator (B) will turn green and your app will show the new module (feel free to rename it)

Resetting Your Module

To reset your module, please follow the directions below:

Start by cutting power to the canopy module (this can be done by either turning off the circuit breaker or by pulling the air-gap on your Inovelli switch if the module is connected to it)
Turn the canopy module power back on for 2 seconds, then power off again for 2 seconds
Repeat this pattern six (6) times
To confirm the module has been reset, the Fan’s light should flash

Alternatively, you can hold down on the Pairing Button (A) for 20 seconds until the LED Indicator (B) turns Red.

Advanced Features Notes

NOTE: The advanced features shown below are what is built into the module firmware, and may or may not be supported by your hub/ gateway. We’ve confirmed they’re supported on SmartThings, Hubitat, and Home Assistant (ZHA and Zigbee2MQTT).
These modules are packed with a ton of amazing features, which include smart bulb/fan mode, Zigbee Bindings, and approximately 45 different parameters to customize your module.
The manual does not have enough room to list out and explain all the parameters and advanced features. However, the following pages will direct you to the proper URL’s. An overview can be found at the QR code to the right or at the following URL: inov.li/vzm36AF

Module Parameters

There are approximately 45 different parameters on this module, making it one of the most customizable modules out there. Due to the space constraints in this manual, we had to list them all out on our website. You can access these parameters by scanning the QR Code or by visiting: inov.li/vzm36parameters

Other Advanced Features

To setup some of the other advanced features, such as: Smart Bulb/ Fan Mode and Zigbee Binding, please see the URL’s below as the instructions will be different depending on the hub you’re using

Smart Bulb Mode: inov.li/vzm36SFM
Smart Fan Mode: inov.li/vzm36SBM
Zigbee Binding: inov.li/vzm36ZB

Product & Contact Info Notes

As mentioned in the beginning of the manual, we’re all smart home owners ourselves and have an amazing community of people who are eager to help and share their setups.
If you ever run into any issues, please do not hesitate to submit a ticket, or post in the community. We’d love to hear from you.
Community Link: inov.li/community
Submit a Ticket: inov.li/support (or scan the QR Code below)
Thanks again for your support and we look forward to helping you get the most out of our smart home!

FCC/IC Statements

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected or consult the dealer or an experienced radio/ TV technician for help. This equipment should be installed and operated with minimum distance 8in (20cm) between the radiator and your body.

IC Caution: This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device.

Product Info

Name: Smart Fan/Light Module
SKU #: VZM36
Power: 120V AC, 60Hz
Signal (Frequency): 2.4GHz
Operating Temperature Range: 32-95° F (0-35° C)
Maximum Load (Fan): 2.5 Amps – No more than two identical fans to the module. Not to exceed 2.5A resistive load.
Maximum Load (Light): 300 Watts Incandescent, 150 Watts LED/CFL
Range: Up to 100 meters line of sight between the Wireless Controller (HUB) and the closest Zigbee Repeater.
Certifications: ETL Listed, FCC/IC & Zigbee 3.0 Certified

For indoor use. Specifications subject to change without notice due to continuing product improvement.

Company Info / Warranty

If you run into any issues, feel free to reach out to us at: contact@inovelli.com. We typically answer tickets within 24-48 hours and are staffed by actual smart home owners.
All Inovelli products come with a one (1) year warranty (defined as 365 days). This warranty protects you from breakdowns in the material or workmanship under normal use. This warranty is limited in a couple areas. Purchases must be made from Inovelli or an authorized reseller. The product should be used in the manner directed in the instructions. The product must only be used and/or installed in the United States or Canada

For full warranty info, please visit : inov.li/warranty

Project Cheryl

The purpose of this project is to bring back our second most popular switch which was the fan/light switch. To this day, it’s our #2 most searched for product on our site.
The name Cheryl was chosen to dedicate this to Eric H’s mom, who passed away in 2019 from cancer. She was an incredible person who instilled her solid work ethic and a stubbornness to never give up. In addition, the project’s name is Cheryl because the goal is to have this pair directly to our button controller, which is named project Walt (after Eric H’s dad who passed away in 2023) so they can always be paired together in homes as they are in heaven. To see the origin of this project, as well as the journey scan the code or visit: inov.li/cheryl

Thank You.

Documents / Resources

| Inovelli VZM36 Blue Series Smart Fan Light Canopy Module [pdf] Instructions
VZM36 Blue Series Smart Fan Light Canopy Module, VZM36, Blue Series Smart Fan Light Canopy Module, Series Smart Fan Light Canopy Module, Smart Fan Light Canopy Module, Fan Light Canopy Module, Light Canopy Module, Canopy Module
---|---