WILD PIXY WPFS01 Protective Cloth User Manual
- June 12, 2024
- WILD PIXY
Table of Contents
WILD PIXY WPFS01 Protective Cloth
Product Information
The WPFS01/WPFS02/WPFS03 is a protective cloth designed for professional use. It complies with the EN ISO 17353:2020 standard.The garment is made of 100% polyester material and is suitable for heavy clothing. It comes in sizes ranging from S to XXL and is designed to provide protection to the torso.
Garment Class Index
- Class 1: Ret > 40 m2Pa/W
- Class 2: 25 < Ret < 40 m2Pa/W
- Class 3: 15 < Ret < 25 m2Pa/W
- Class 4: Ret < 15 m2Pa/W
Recommended Temperature Range
- Class 1: Up to 105°C
- Class 2: Up to 180°C
- Class 3: Up to 250°C
- Class 4: Suitable for protection against rain
Manufacturer Information
UK Manufacturer: Kingfisher International Products Limited, 3 Sheldon Square, London, W2 6PX, United Kingdom EU Manufacturer: Rossmore Business Park, Ellesmere Port, Cheshire CH65 3EN
Product Usage Instructions
To ensure your safety while using the WPFS01/WPFS02/WPFS03 protective cloth, please follow these instructions:
- Storage: Do not store the garment in places exposed directly to rain or other environmental conditions that may affect its performance. Store it in a dry and safe location.
- Aftercare: Do not wring, iron, or tumble dry the garment. It is recommended to wash the garment a maximum of 5 times.
- Selection of Size: The WPFS01/WPFS02/WPFS03 protective cloth is available in sizes ranging from S to XXL. Choose the size that fits you best using the provided size chart.
- Proper Use: Ensure that the garment is worn according to its intended use and the specified temperature range. Do not use the garment for purposes other than professional use.
- Class Index and Temperature Range: Refer to the garment’s class index and temperature range to determine its suitability for the desired level of protection.
- Manufacturer Information: Contact the manufacturer for any further information or inquiries regarding the product.
ISO 17353:2020 Protective Cloth for professional us
The garment must not be modified – it must be kept dean to be effective.
Replace the garment if permanently stained or faded, or otherwise
damaged.Regular comparison against a new garment is recommended. The aftercare
instructions must be followed as improper treatment may alter the garment’s
performance. For B2 devices, in order to achieve 360 visibility (visibility
from all sides) at leasttwo B2 devices shall be used; these shall be used on
the left and the right side of the torso.
343:2019 Protective Clothing – Protection against Rain
The indexes indicate the class of the garment. The upper index indicates the
resistance to water penetration, classes 1-4 is the most resistant. The lower
index indicates the water vapour resistance 1-4, where 4 is most breathable X
indicates the garment hasn’t been tested according to waterproofness of a
readymade garment.
(Fig. 1) Recommended maximum continuous wearing time for a complete suit
consisting of jacket and trousers without thermal lining.
Class
| 1| 2| 3| 4
Temperature
environment °C
| R et > 40 m2Pa/W| 25 < R et
40 m2Pa/W
| 15 < R et
m2Pa/W
| R et
m2Pa/W
25| 60| 105| 180| – a
20| 75| 250| –| –
15| 100| –| –| –
10| 240| –| –| –
5| –| –| –| –
Table valid for medium physiological strain M =150W/m2, standard-man, at 50% relative humidity and wind speed Va = 0.5 m/s. With effective ventilation openings and/or break periods the time for wearing can be prolonged
- This product complies with conformity requirements of the applicable European Regulations 2016/425 or Directives.
- This product complies with Regulation (EU) 2016/425 as brought into UK law and amended.
(Fig 2) Available sizes & selection
| X (CM) | Y (CM) | **** | |
|---|---|---|---|
| S | |||
| M | |||
| L | |||
| XL | |||
| XXL |
Fit according to chest and waist size, a larger size may be required if worn over heavy clothing, Size – ranges from S to XXL
Improper Use
Dirty clothing may lead to a reduction in protection and if at any time this
garment is unrecoverably soiled or contaminated, it should be replaced
immediately. Dispose of this garment appropriately at the end of its life –
textile materials may be recycled.
This garment should be worn fastened at all times to provide the correct level
of protection as stated above.
Storage : DO NOT store in places subject to direct strong sunlight. If
the garment becomes wet allow it to dry at room temperature before storing.
Aftercare
- MARAU®
- Max x 5 wash cycles
- Do not wash in biological powder
- Hand or machine wash 40 degrees (max)
- Do not wring
- Do not bleach
- Do not iron
- Do not tumble dry
No liability will be accepted for garments where care labels have been
ignored, defaced or removed.
Outer fabric: 100% polyester EU type-examination carried out by SGS Fimko
Ltd. Notified Body 0598 Takomotie 8, FI-00380 Helsinki, Finland. UKCA type-
examination carried out by SGS United Kingdom Limited AB0120 Rossmore Business
Park, Ellesmere Port, Cheshire CH65 3EN
WARNING: THE STATED MAXIMUM NUMBER OF CLEANING CYCLES IS NOT THE ONLY
FACTOR RELATED TO THE LIFETIME OF THE GARMENT. THE LIFETIME WILL ALSO DEPEND
ON USAGE, CARE, STORAGE ETC.
IMPORTANT – These instructions are for your safety. Please read through
them thoroughly prior to handling the product and retain them for future
reference. www.diy.com. /
www.screwfix.com. /
www.screwfix.ie. To view instruction manuals online,
visit www.kingfisher.com/products.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>