SESSAK K55412-4 Lux Spot Light Instruction Manual
- June 16, 2024
- SESSAK
Table of Contents
SESSAK K55412-4 Lux Spot Light
SYMBOL
Read the entire instructions before installing the luminaire Save the instructions for potential future need. Disconnect the electrical power-supply before installation or service.
Symbols that POTENTIALLY can be found on the luminaire and their meaning. CHECK the luminaire.
Class I. The luminaire must be connected to protective earth.
Class II. The luminaire is double-insulated and is not to be connected to protective earth.
The product conforms with health, safety, and environmental protection standards for products sold within the European Economic Area {EEA)
The protective earth cable (usually yellow-green) is connected to the terminal identified by this symbol.
The phase (live) cable (usually brown) is connected to the terminal identified by this symbol (L)
The neutral cable (usually blue) is connected to the cable identified by this symbol (N)
States the minimum distance in meters to
the area that is to be illuminated, TAKE INTO ACCOUNT doors, widows etc., that
could possibly come within this distance when they are opened.
Ingress Protection class 21 (protection against dripping water)
Ingress Protection class 44 (protection against splashing water)
The HIGHEST ALLOWED power of the bulb(s) in Watts
Only for indoor use
Is NOT to be thrown away with household waste. You can help in the protection of the environment by taking discarded products to a recycling-station intended for them.
INSTALLATION INSTRUCTIONS
Customer Support
SESSAK OY AB – PORVOO – FINLAND –WWW.SESSAK.FI
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>