R-G011 Eye Massager

Product Information

Specifications

• Device: RENPHO Eyeris Shift

• Components: Eye massager unit, light eye mask

• Intended Use: Personal care

• Not for medical or commercial purposes

• Age Limit: Not intended for children or persons living with a
  disability

• Supervision: Children should not play with the device

• Cleaning and Maintenance: Should not be conducted by
  children

• Power Source: DC 5V 2A charger (not included)

Product Usage Instructions

Safety Instructions

Please read all instructions carefully before use.

1. This device is intended for personal care use only and not for
   medical or commercial purposes.

2. This device is not intended for use by children or persons
   living with a disability, unless properly supervised or instructed
   by a responsible person.

3. Children should not play with the device.

4. Cleaning and maintenance should not be conducted by
   children.

Danger – Electric Shock

• Never use pins or other metallic fasteners with this
  device.

• Do not use the device with wet hands or submerge it in water or
  any liquid.

Warning – Burns, Fire, or Injury

1. Please consult a doctor before use if you fit into any of the
   following user groups:

   • Persons who have undergone eye surgery or have eye conditions
     such as glaucoma, cataract, and retinal detachment

   • The elderly

   • Pregnant or postpartum women

   • Persons allergic to suede or milk fiber

   • Persons with skin infections, sensitivity, redness, and/or
     burns on the skin

   • Persons with any swelling or wound around the eye area

   • Persons using a pacemaker or other implantable medical
     devices

   • Persons with a heart condition, malignant tumors, or other
     serious health conditions

   • Persons undergoing medical treatment

   • Persons with high or abnormal blood pressure

2. Remove contact lenses, glasses, false eyelashes, hairpins, and
   any other accessories before use.

3. If you experience any discomfort during use, stop using the
   device immediately.

4. Do not use the device under blankets, pillows, or any other
   object that can cause excessive heating.

5. Do not use the device if it is not working properly, has been
   damaged, or dropped into water.

6. Do not use the device while driving, walking, or running.

7. Only use the charger (DC 5V 2A, not included) to recharge the
   device.

8. Avoid contact with sharp objects.

9. Be careful when using heated surfaces, as they may cause
   serious burns.

What’s in the Box

• Eyeris Shift x1
• Charging Cable x1
• Storage Bag x1
• User Manual x1
• Quick Guide Card x1

About Your Eyeris Shift

Components

1. Elastic Headband
2. Removable Mask (Standalone)
3. Hook Buckles
4. Straps
5. Pressure Module (Not Standalone)
6. Main Control Unit
7. Adjustable Buckle
8. Charging Port
9. Pressure Button (Indicator)
10. Heat / Silent Mode Button (Indicator)
11. Power / Timer Button (Indicator)
12. Volume / Next Track / Bluetooth Button (Indicator)
13. Adjustable Speakers

Indicator Status

• Device is turned on or working.
• Device is in low battery or charging.
• Power indicator turns solid white.
• Power indicator flashes red slowly.
• Device is fully charged.

Frequently Asked Questions (FAQ)

Q: Can children use the RENPHO Eyeris Shift?

A: No, this device is not intended for use by children. It
should be used only under proper supervision or instruction by a
responsible person.

Q: Can I use the device if I have undergone eye surgery?

A: It is recommended to consult a doctor before use if you have
undergone eye surgery or have any eye conditions. They can provide
specific guidance based on your individual situation.

Q: Can I use the device while wearing contact lenses or

glasses?

A: No, please remove contact lenses, glasses, false eyelashes,
hairpins, and any other accessories before using the device.

Q: How do I clean and maintain the RENPHO Eyeris Shift?

A: Cleaning and maintenance should not be conducted by children.
Please refer to the user manual for detailed instructions on how to
clean and maintain the device.

Q: Can I use the device while charging?

A: No, it is not recommended to use the device while it is
charging. Please wait until it is fully charged before using.

Thank you for choosing the RENPHO Eyeris Shift! This device combines an eye massager unit and a light eye mask for an innovative solution that merges the benefits of eye massage with the convenience of a heated eye mask. We wish you a soothing and revitalizing experience with the RENPHO Eyeris Shift.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS CAREFULLY BEFORE USE. 1. This device is intended for personal care use only and not for medical or
commercial purposes. 2. This device is not intended for use by children or persons living with a
disability (reduced physical, sensory, or cognitive condition), or individuals lacking the necessary experience and knowledge to safely operate it unless they are properly supervised or instructed by a responsible person. 3. Children should not play with the device. 4. Cleaning and maintenance should not be conducted by children.
DANGER – To reduce the risk of electric shock: 1. Never use pins or other metallic fasteners with this device. 2. Do not use the device with wet hands or submerge the device in water,
or any liquid.
WARNING – To reduce the risk of burns, fire, or injury to persons: 1. Please consult a doctor before use if you fit into any of the following
user groups: – Persons who have undergone eye surgery or eye conditions such as
glaucoma, cataract, and retinal detachment – The elderly – Pregnant or postpartum women – Persons allergic to suede or milk fiber – Persons with skin infections, sensitivity, redness, and/or burns on the
skin – Persons with any swelling or wound around the eye area – Persons using a pacemaker or other implantable medical devices – Persons with a heart condition, malignant tumors, or other serious
health conditions
01

– Persons undergoing medical treatment – Persons with high or abnormal blood pressure 2. Remove contact lenses, glasses, false eyelashes, hairpins, and any
other accessories before use. 3. If you experience any discomfort during use, stop using the device
immediately. 4. Do not use the device under blankets, pillows, or any other object
that can cause excessive heating. 5. Do not use the device if it is not working properly, has been
damaged, or dropped into water. 6. Do not use the device while driving, walking, or running. 7. Only use the charger (DC 5V 2A, not included) to recharge the
device. 8. Avoid contact with sharp objects. 9. Be careful when using heated surfaces, as they may cause serious
burns. Do not use over insensitive skin areas or on persons with poor circulation. Children or incapacitated persons should not use heat unattended. 10. High temperatures may cause burns to occur regardless of the control setting. Do not use the device on infants or persons who are with disabilities or unconscious. Check frequently where the skin is in contact with the heated area to reduce the risk of blistering. 11. This device contains a non- replaceable battery. When the battery reaches its end, the device should be properly disposed of. 12. Do not expose the device or battery to excessive temperatures.
SAVE THESE INSTRUCTIONS
WHAT’S IN THE BOX
Eyeris Shift x1 Charging Cable x1 Storage Bag x1 User Manual x1 Quick Guide Card x1
02

ABOUT YOUR EYERIS SHIFT
13
7 1 2 8

6 43

5 9

1 Elastic Headband

10 11 12

2 Removable Mask (Standalone)

3 Hook Buckles

4 Straps

5 Pressure Module (Not Standalone)

6 Main Control Unit

7 Adjustable Buckle

8 Charging Port

9 Pressure Button (Indicator)

10 Heat / Silent Mode Button (Indicator)

11 Power / Timer Button (Indicator)

12 Volume / Next Track / Bluetooth Button (Indicator)

13 Adjustable Speakers

03

Indicator

Status
Device is turned on or working.
Device is in low battery or charging.

Indicator Power indicator turns solid white.
Power indicator flashes red slowly.

Device is fully charged.

Power indicator turns solid red.

Device is charging at a voltage higher than 6V.

Power indicator keeps flashing red
quickly for 1min and then turns off, indicating a wrong charger is used.

Bluetooth is disconnected. Bluetooth indicator turns solid white.

Bluetooth is connected. Bluetooth indicator turns solid blue.

“Low heat” is selected.

Heat indicator turns solid white.

“Medium heat” is selected. Heat indicator turns solid blue.

“High heat” is selected.
“No temperature” is selected.

Heat indicator turns solid red. Heat indicator turns off.

“Soft pressure” is selected. Pressure indicator turns solid white.

“Strong pressure” is selected.

Pressure indicator turns solid red.

“No pressure” is selected.
Turn off the device when “no pressure” is selected and then turn on.

Pressure indicator turns off.
Pressure indicator keeps flashing white for 5 seconds and then turns off, indicating the pressure module is installed properly.

04

CHARGING YOUR EYERIS SHIFT

Fully charge the device before initial use.

Charging time: approx. 90min

DC 5V 2A Charger (Not Included)

Charging Port

Provided Charging Cable

Power Source Note: Do not use the device while charging.

DETACHING/ATTACHING THE EYE MASK
1. Separate the Eye Mask from Pressure Module: a. Use your thumb to firmly push the main control unit upward to
uninstall it. b. Carefully unfasten the straps from the plastic hooks. c. Gently remove the mask from the pressure module dAttach the main control unit in place using the fastening fabric.

b a

c d
05

2. Attach the Mask for Eye Massage Use: a. Carefully detach the main control unit from the eye mask and
connect the main control unit to the pressure module, ensuring there is no gap between them. b. Align the nose contour of the eye mask with that of the
pressure module and attach the mask to the pressure module
using the fastening fabric. c. Securely fasten the straps on both sides of the device.

a

b

c

WEARING YOUR EYERIS SHIFT
1. Before wearing, remove any eye accessories (e.g. eyeglasses, false eyelashes, etc.). Wear the device and adjust the headband to ensure a comfortable fit and effective light blocking.
2. Adjust the speakers to keep them near your tragus for optimal
auditory experience.

06

FCC Regulatory Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Compliance This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
ISED Regulatory compliance This device contains licence-exempt transmitters that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference. (2)This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme aux limites d’exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé.

US Importer: JOICOM CORPORATION 14129 The Merge Street, Building 3 Unit A, Eastvale, CA 92880

Manufacturer: Shenzhen Ruiyi Business Technology Co., Ltd. No. 810-C063, 8th Floor, Xiangbin International Financial Centre, No.18, West Free Trade Street, China Special Economic Zone, Qianhai Bay, Shenzhen, Guangdong Province,518000 China

Made in China

NA1

NN

H

USING YOUR EYERIS SHIFT
Button Function a. Press and hold to power on/off.

Eye Massager

Mask

b. Press to select the timer: 10min (default)/20min/30min.
c. Double press to enable/disable the “no timer” function. When “no timer” is activated, only music and Bluetooth functions are available.

a. Press to adjust the temperature: high heat (118, default)/no temperature /low heat (107)/medium heat (113).

b. Press and hold to switch between voice mode and silent mode.
In silent mode, the voice broadcast and included music will be disabled. The music playing from your smartphone will be paused but can be resumed through your smartphone.

a. Press to cycle the music volume through level 3 (default)/4/5/0/1/2.
b. Press and hold to switch to the next music track.
c. Double press to turn on/off Bluetooth. When the device is turned on, Bluetooth is enabled by default.
07

Button Function
a. Press to adjust the air pressure level: soft pressure (default)/strong pressure/no pressure. Once “no pressure” is selected, the Pressure Mode Button will not respond.
b. Press and hold to cycle through the following pressure modes: Tension Relief Mode: eyes & temples (default) Retinal Protection Mode: eyes only Regeneration Mode: temples only

Eye Massager

Mask

Note: Memory function: The device automatically recalls the last set heat
level, pressure level, pressure mode and auto-off timer once turned on again.
Auto-off timer: Once the timer is set, the device will operate for the selected duration and then automatically shut off.

CONNECTING TO BLUETOOTH
1. Turn on the device and enable Bluetooth on your smartphone. 2. Search for “R-G011” via your Bluetooth settings and connect to
play your music playlist through the device.
Note: Once paired successfully, the device will be automatically connected to Bluetooth next time, followed by a voice prompt “Bluetooth connected”.

08

CARE & MAINTENANCE
1. Turn off the device and allow it to cool down before cleaning or storing.
2. Wipe the device surface with a soft cotton cloth slightly dampened with mild detergent. Do not submerge it in water or use bleach or
corrosive cleaners. 3. Ensure the device is clean and dry before storing. Store it in a cool,
dry place, away from direct sunlight, moisture, heat, and corrosive gases. 4. If the device has not been used for over 3 months, charge it periodically to prolong its lifespan. 5. Do not disassemble or repair the device by yourself, as this may cause damage and void the manufacturer’s warranty.

TROUBLESHOOTING GUIDE

Problem

Possible Cause

Solution

Pressure

The main control unit is Ensure the main control unit is

function does not installed properly. installed properly and

not work.

securely.

“No pressure” is selected.

Switch to “low pressure” or “high pressure”.

There is weak air pressure.

“No timer” is selected. Deactivate the “no timer” function.

The mask and the

When installing, align the nose

pressure module may contour of the mask with that

not be aligned or

of the pressure module and

installed properly, or the then secure the straps.

straps are not fastened

securely.

“Soft pressure” is selected.

Switch to “strong pressure”.

The device is worn too Adjust the headband for a

loosely.

snug fit.

09

Problem

Possible Cause

Solution

Charging is not happening or slow.

Use a charger with a Use a DC 5V 2A charger (not voltage higher than 6V. included).

Use other types of charging cables.

Use the provided charging cable or DC 5V 2A charging cable only.

Fail to connect to Bluetooth.

Bluetooth on smartphone is not enabled.

Enable Bluetooth on smartphone and connect to “R-G011”.

The device is connected to another mobile device.
The device is off.

Ensure the device is fully disconnected from another mobile device.
Turn on the device and connect to Bluetooth.

There is no voice broadcast, no music, or the sound of music is faint.

Silent mode is selected. Switch to voice mode.

Bluetooth music is

Adjust the volume level

playing at volume level 0. through your smartphone.

Music volume level 0 or low music volume level is selected through the device.

Adjust the music volume level.

There is no heat.

“No temperature” or

Adjust the heat level.

“low heat” is selected.

The device needs time to warm up.
Built-in overheat protection.

Wait for 1min after power on. It is normal. The device will automatically restart after cooling down.

10

Problem

Possible Cause

Fail to turn on Out of power. the device.

Solution Charge the device.

Short press the Power Long press the Power Button

Button.

to turn on the device.

The device stops working suddenly.

Out of power. The built-in auto-off timer is activated.

Charge the device. Restart the device if needed.

If you encounter any other problems, please contact our customer service.

TECHNICAL SPECIFICATIONS
Product Name: Eye Massager Model: R-G011 Input: 5V 2A Battery Capacity: 1500mAh

11

WARRANTY POLICY
Your RENPHO product purchase is covered by a one-year limited manufacturer warranty from the date of delivery. For warranty terms and conditions, please visit https://renpho.com/pages/warranty-terms-and-conditions
Note: Product registration is not required for the warranty. If you choose not to register your product, it will not diminish the product warranty.
CUSTOMER SERVICE
Please feel free to contact us if you have any questions or concerns. RENPHO Customer Service Team guarantees a quick response and hassle-free solutions to any issue you may have within business hours.
1(844) 417-0149(US ONLY) Monday-Friday 9:00AM-4:30PM 1800 MY RENPHO (1800 69 7367) (AU ONLY) Monday-Friday 9:00AM-6:00PM (AEST) [email protected](US&CA) [email protected] (AU)
*For defective products or the return of items, please contact us with your order number within the specified warranty period. DO NOT dispose of any product parts as they may be required for inspection/repair.
12

User Manual
Model: R-G011
Eyeris Shift

References

• Warranty Terms and Conditions – RENPHO US

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>