RENPHO P-ALM070H Leg Massager with Heat User Manual
- June 16, 2024
- Renpho
Table of Contents
User Manual
P-ALM070H Leg Massager with Heat
Leg
Massager with Heat
Model: RP~ALMO70H
Thank you for your purchase of RENPHO Leg Massager with Heat.
This Leg Massager is designed to massage your feet, calves and thighs. It
helps to relieve muscle pain and fatigue. You should use it with care and
safety in mind. To ensure safety and avoid any proper ty damage, please read
this manual carefully and use as indicated. Non-compliance may cause serious
injuries or death and/or severe property damage.
Important Safety Instructions
When using the appliance, basic precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS CAREFULLY BEFORE USING.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or cognitive capabilities or lack of experience and knowledge if they have been iven supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children should not play with the appliance.
- Cleaning and user maintenance shall not be made by children.
- This appliance should not be used for any medical purposes. It is designed for household use only.
DANGER – To reduce the risk of electric shock and fire:
- Never use pins or other metallic fasteners with this appliance.
- Ensure that the electrical voltage and frequency of the circuit correspond to those indicated on the adapter.
- Do not leave the appliance unattended when it is working.
- Always unplug the power adapter from the electrical outlet after each use.
- Do not plug or unplug the power adapter or air hose with wet hands.
- Keep the cord and appliance away from heated surfaces.
- The appliance has a heating function. Persons insensitive/sensitive to heat should turn off the temperature while using.
WARNING -To reduce the risk of fire, electric shock, or injury to persons, please follow the instructions below:
-
If you fall into any of the following user groups, please consult a doctor before use:
– Pregnant or lying-in women
– Children
– Elderly (over 65 years old)
– Persons with skin infections, sensitivity, redness, wo und, and/or burns on the skin
– Persons using a pacemaker or other implantable medical device
– Persons with heart disease, malignant tumors, or other serious health conditions
– Persons receiving medical treatment or feel discomfort during massages
– Persons suffering from osteoporosis, diabetes, or thrombosis
– Persons with high or abnormal blood pressure
– Persons suffering from a sensory impairment that reduces the feeling of pain or heat (e.g. metabolic disorder)- Persons suffering from fever over 100.4°F -
Stop using if you feel abnormal or unwell after use and consult a doctor.
-
DO NOT use spare parts that are not approved by REN PHO.
-
Non-professional repair personnel should not dismantle or replace the appliance without manufacturer permission.
-
DO NOT use the appliance if wrap surfaces or the power cord are damaged.
-
DO NOT use or store the appliance in a place with humidity such as a bathroom or places with high temperature.
-
DO NOT carry the appliance by the power cord or handheld controller.
-
DO NOT use while sleeping, operating machinery, or after alcohol consumption.
-
DO NOT stand or walk while using the appliance.
-
DO NOT expose the handheld controller, the wraps, or the power adapter to water as this may result in malfunction or electric shock.
-
DO NOT scratch, excessively bend, pull, or twist the wire of the power adapter.
-
DO NOT place heavy objects on or insert any foreign objects into the slit (this may cause fire and electric shock).
-
DO NOT use the sharp tools to scratch or puncture the wraps, as this may cause the appliance to an air leak.
-
DO NOT use wraps directly on swollen, inflamed areas, sensitive skin, or skin eruptions.
-
DO NOT use the appliance for more than 20 minutes at a time. Extensive use could lead to the appllance’s excessive heating and shorter lifespan.
-
DO NOT operate under a blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons.
-
DO NOT use the appliance on pets or animals.
-
Use heated surfaces carefully. May cause serious burns. The unattended use of heat by children or incapacitated persons may be dangerous.
-
Temperatures sufficiently high to cause burns may occur regardless of the control setting. Do not use on an infant or invalid or on a sleeping or unconscious person. Do not use it on insensitive skin or on a person with poor blood circulation. Check the skin in contact with the heated area of the appliance frequently to reduce the risk of blistering.
SAVE THESE INSTRUCTIONS
About the RENPHO Leg Massager with Heat
1, What’s in the box
1 x Pair of calf & foot wraps
1 x Pair of thigh wraps
1 x Handheld controller
1 x Power adapter
1 x User manual
1 x Storage bag
2. Product introduction
Using the RENPHO Leg Massager with Heat
1. Important tips before use
1.1 When wearing the wraps, please ensure the corresponding wraps for Left and
Right Legs. There is a round sticker on the hose interface marks “R” and “L”,
please match the right color and legs to make sure the normal use.
1.2 Find the marks on the thighs wrap, it shows which side is
UP. Please refer to the below picture.
1.3 Make sure all of the hose have been attached securely and
color matched.
1.4 If you feel powerful or uncomfortable, here are some solutions for your
better reference.
01-Choose the lowest intensity
02-Open the Velcro of the corresponding part
03-Press POWER button to turn off
04-It is recommended to leave a gap available to put 4 fingers in it or choose
the lowest intensity if you feel powerful Please refer to the below
picture.
1.5 The length of air hose can be adjustable
according to your need. Please check the below picture.
1.6 The temperature rise of handheld controller is normal.
2. Operation Instruction
-
” Power On/Off Button. Press to turn on/off the massager. The default mode is combine massage mode 1 with air intensity M. and high heat level(SOLID RED).
-
: Combine Massage Modes. Press to select from the 3 com- bine massage modes.
Combine 1: Massage full legs.
Combine 2: Massage feet and calves.
(It can be used individually, and don’t need to connect the air hose of thighs wraps.)
Combine 3: Massage feet, calves, thighs by turn. It will be turn off when you press the Button C again. -
: Separate Massage Modes. Press to select from the thigh, calf and foot separately.
T: Massages thighs
C: Massages calves
F : Massages feet. It will be turn off when you press the Button
S again. -
TH Heat Button: Press to adjust the heat levels (low and high temperature), the default heat level is high temperature. BLINK- ING RED indicates the low temperature, SOLID RED indicates the high temperature. You can press this button to turn off it.
Heating area: calves and feet. -
: Air Intensity Button. Press to reduce or enhance the intensity. There are 3 intensity levels for each mode, the default intensity is level M. It is recommended to leave a gap available to put 4 fingers in it or choose the lowest intensity if you feel power ful.
Note:
- The massager will be auto shut-off every 20 minutes. And before auto shut off, the indicator light of the corresponding mode will be BLINKING RED. Press the power button again to re-run the massager.
- The massager comes with memory design, so it automatically operates the last running mode and speed when powering on. (Without power cut off)
- If you choose one of these functions like combine mode or separate mode or heat, you can turn it off by pressing the button C. Under this situation, when you press the power button, it doesn’t come with memory function, the default mode is Cl with air intensity M and high heat level(SOLID RED).
Maintenance
-
Cleaning Method
** – Do not** machine wash. Do not immerse in any liquid to clean. Do not clean it with abrasive cleaners, brushes, gasoline, kerosene, glass polish, or paint thinner. It is recommended to wipe down the massager with a soft, slightly dampened cloth instead. -
Packing Method
Please avoid folding the connection hose when packing; otherwise this may cause inflation failure.
Troubleshooting
PROBLEM
| CAUSE|
SOLUTION
---|---|---
The product does not work| The power is not con- nected or the plug is loose|
Plug in the power cord correctly
The power switch is not on or auto-shut-off timer turns it off| Turn on the
power switch
Some part can’t inflate| The color of hose doesn’t match| Please follow the
instructions according to important tips before use to match, if it doesn’t
match, please contact support-eu@renpho.com
The current massage mode exclude massage this part| Please choose the
corresponding mode
The tube have not been attached securely, and there is air leaks| Please check
again if hose attached secure-ly with boots. (no gap between hose interface
and boot)
The tube has been folded| 1.Please avoid folding the tube when packing
2.Please contact support@renpho.com
Feel powerful or uncomfortable| Wrap your legs too tight| 1.Choose the lowest
intensity
2.Open the Velcro of the corresponding part button to turn off
3. Press POWER Maybe use the highest intensity
The product suddenly stops working| The massager’s over- heat protection
feature will switch off the mas- sager automatically when too hot| Wait for
the massager to cool down before powering it back on
20 minutes timer turns it off| Press the power button again
The handheld controller gets hot| The product have been used continuously for
long time(The tempera- ture rise of handheld control is normal.)| Recommended
to use 20 minutes to 30minutes to avoid
OVER USE. After turning off, allow the massager to cool down before using
again
Feel the difference of intensity when massaging two legs at the same time|
Some tube has not been attached securely or attached the wrong hose| Please
make sure the tube attached securely
When wearing the boots, the gap you leave may be different| Please leave the
same gap when you wear it
Can’t feel the heat/Heat func-tion is weak| Maybe choose the low temperature|
Please choose the high temperature
Maybe use it just 1-2 minutes| Please use it about 4-6 minutes
If you encounter any other problems, contact: support-eu@renpho.com
Product Name: RENPHO Leg Massager with Heat
Model: RP-ALM070H
Product: Input: 12V 2A
Rated Power: 24 W
AC Adapter: Input: AC 100-240V 50/60Hz
Output: 12V 2A
Auto-off Timer: 20minutes
Warranty Policy
Your RENPHO product purchase is covered by a one-year limited manufacturer
warranty from the date of delivery.
For warranty terms and conditions, please visit: https://renpho.com/pages
/warranty-terms-and-conditions
Note: Product registration is not required for the warranty. If you choose
not to register your product, it will not diminish the product warranty.
Please feel free to contact us if you have any questions or concerns. RENPHO
Customer Service Team guarantees a quick response and hassle-free solutions to
any issue you may have within business hours.
Tel: 1800 MY RENPHO (1800 69 7367) (AU ONLY)
Monday-Friday 9:00AM-6:00PM (AEST)
+44(0)7434-666088 (UK ONLY)
Monday-Friday 9:00AM-5:00PM(GMT)
Email: support-au@renpho.com (AU)
support-eu@renpho.com(UK&EU)
*For defective products or the return of items, please contact us with your order number within the specified warranty period.
DO NOT dispose of any product parts as they may be required for
inspection/repair.
Notice:
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmental safe recycling.
UK Importer: EEON(UK)LIMITED
Kemp House 160 City Road, London, EC1V 2NX, United Kingdom
EU Importer: Renpho GmbH
Lehmweg 17, 20251 Hamburg Hoheluft-Ost, Deutschland, Germany
Richers & Vision Ltd.
Unit 588, Bordon Enterprise Park, Budds Lane, Bordon, Hampshire,
GU35 OJE, U.K.
**C &E Connection E-commerce (DE) GmbH**
Zurn Linnegraben 20, 65933, Frankfurt am Main, Germany
Email: Info@ce-connection.de
Manufacturer: Shenzhen Ruiyi Business Technology Co., Ltd.
Qianhai Complex A201, Qianwan Road 1, Qianhai Shenzhen-Hong Kong
Cooperation Zone, Shenzhen, 518000 P.R.China
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>